This is open for everyones input who has recieved this kit. When i assembled mine recently it came with a sheet that describes all of the settings and such.... but its in engrish If anyone has figured out what each does and how it effects performance and motor braking (cuz i know thats a thing it can do) please leave your cry for help below or tell me what on earth it all means
@darkwhite1259
3 жыл бұрын
what i've found is the boards burn out very easily. My brothers gone through 3 of them already and the last 2 died in like 10 seconds.
@David-ne2cc
3 жыл бұрын
@@darkwhite1259 the upgrade boards? Because i expect stock boards to burn out. Get the upgrade kit or a selectfire V6 kit for a stryfe and you can slap it in almost anything
@darkwhite1259
3 жыл бұрын
@@David-ne2cc the select-fire kits almost always burn out as well and yes the upgraded boards have burnt out in a matter of seconds. I think they just can;t handle the current and where made for the stock regulator. 2x frvs+ 1x honey badger= about 65-70 amps
@David-ne2cc
3 жыл бұрын
@@darkwhite1259 the only data i can give you is that im using mieshel 2's and a stock pusher in mine with the ROF at its highest possible Sorry that youve had a poor experience with those boards
@darkwhite1259
3 жыл бұрын
@@David-ne2cc Lower current for yours. That would make more sense
@eiscingdeath2004
4 жыл бұрын
I was getting some strong Captain Xavier vibes from that paint job but with grey instead of black and I have to say it looks sharp.
@homelee665
4 жыл бұрын
I have that kit, but never got around to doing anything with it. I love that barrel piece you have on it. Good vid, sir!
@nicholasmazzarella2720
4 жыл бұрын
Dr.F This thing rocks. Thanks for showing it off. Love the paint scheme and the muzzle device. Great work as always. Keep the great content coming.
@3rn3sttv
4 жыл бұрын
Nice mod Dr Flux!!!! Love this blaster and your channel of course!!!
@drflux
4 жыл бұрын
Much appreciated!
@ocularcavity8412
4 жыл бұрын
Another good one keep up the good work. Ekind waffle heads are good for that system, their foam holds up good and they are WAY MORE accurate than elite if you buy them from china ( unbranded ) you can get around 1000 for around $40. i have done the same mod only i put in Black worker wheels with the slanted groves and i switched the motors to neo rhinos ( that will help with the droop on full auto ) but i kept the factory cage and HOLY CRAP is that thing accurate the fps is not amazing 109-115 fps at most but it is the most accurate fly wheeler i own PERIOD. I put a HOLDster bracket on it so i can use it as a sidearm if i want. i am so glad i bought it and it is all thanks to Walcom. BTW i think you should SERIOUS consider upgrading the motors they could be why you are shredding darts, your blaster was SERIOUSLY bugging down on the mag dumps and if the darts aren't going through the flywheels fast enough it could be causing the shredding as the belts try to force them through faster than the flywheels can launch them. i have only shred darts during a jam with this blaster watch at 16:10 on my video mine is on 3s lipo and the rate of fire is NUTS kzitem.info/news/bejne/zpml136Lm4GjeaQ
@TheSybermedic
4 жыл бұрын
Thanks for the video. I too have gotten the replacement board and not done anything with it yet. I guess I should get to work.
@kaio0777
4 жыл бұрын
This look nice really digging the color and extra work that u put into this
@drflux
4 жыл бұрын
Thank you so much!
@kaio0777
4 жыл бұрын
No problem man just keep up the great work liking the stuff u post so far
@fatboyshadetree5139
7 ай бұрын
Ilove how you showed what you actually did to the blaster internally. This was just a review of a modded blaster. Not actually showing what was done.
@GSZ28
4 жыл бұрын
Nice blaster!
@Matt-md5yt
4 жыл бұрын
that is pretty cool, glad you used a Buzzbee magazine on the back. sad this thing can't use AF waffles but at least the Standard elites work well on it
@nathanfult
4 жыл бұрын
Nice almost 1k
@akagainesy
4 жыл бұрын
Love this kit. Need to do a little more to mine before it's ready. Also really like that muzzle attachment you have there and the paint job on it is slick. I may have to do something similar for another project of mine that is ready for paint ;)
@drflux
4 жыл бұрын
Cool, thanks!
@sweetlikechocothai
Жыл бұрын
My favourite nerf blaster. I also have it running on a 2S Lipo. 9 darts per second at 75 FPS and single shots go to around 95 FPS.
@bz4701
4 жыл бұрын
Very cool!
@eggbag4182
3 жыл бұрын
Dart shredding isn't a you problem. Stock, both my Hyperfire and Regulator shred Adventure Force Waffles, and there are issues with not even pushing the darts at all.
@Crunkboy415
4 жыл бұрын
Put in some Fang Revamps you can kick it up to 130 fps or more 😁
@ricecastle4691
4 жыл бұрын
Cool mod I wish I had a flywheel blaster that I could mod I only have springers.
@zaka0781
4 жыл бұрын
Sweet mod!
@pamelafirlik4355
4 жыл бұрын
You should try ekind waffle darts they might work
@blitzkri3g187
Жыл бұрын
I've lost so many darts to my regulator, just shreds them up.
@legoliker1
4 жыл бұрын
I purchased two of these kits from nfstrike. They both were DOA, but that's on J's black tech, as they are the makers of the board
@drflux
4 жыл бұрын
Did NFStrike work with you to get working boards? Im curious how their customer service is.
@tylerj.c.3235
4 жыл бұрын
I love the video, one critique is maybe turn down the background music just a little.
@milksponge00
4 жыл бұрын
I have been working on a Hyperfire and that seems to be shredding the back of darts like crazy, although I think part of the issue with that is the darts aren't feeding great into the wheels.... I'm thinking the OFP cage I used needs a bit of a guide to get those darts into the wheel more consistently.
@jordanmingo7016
3 жыл бұрын
What if you make the belt segmented like in the chaos
@thunderb.dreadnought1363
4 жыл бұрын
I had the shredding issue with AF waffles on stock voltage.
@MrAlphaBrick
Жыл бұрын
Hi I’m here from coop 😢
@Sparroh
Жыл бұрын
Wish it worked with waffle though
@Blazer-mq9mt
4 жыл бұрын
Hello I’m looking to buy the colenol wasp firefly o cannot find a good buttstoc without a buffer tube do you know any good ones
@Midnight890
3 жыл бұрын
Um dr flux idk for sure but I thought that the terrascout uses a pusher system because of the noise it makes when firing and because the original prototype was literally a sawed off taped rapidstrike head?? But if you’ve opened one can you tell me the internals please
@drflux
3 жыл бұрын
you are most likely correct when I made this video i hadn't even seen a terra scout in RL. After looking at one it does look like a minimized rapid strike on tank treds
@Midnight890
3 жыл бұрын
@@drflux yea sorry for the correction just wanted to confirm. I’m no way do I believe me to be above you as your a more skilled motor. Thanks for the reply
@Midnight890
3 жыл бұрын
@@drflux but it does make sense that you would think that judging I believe it shoots about turbine/hyper fire speed rather than rapidstrike speed. It’s higher voltage but they might have simply made the gearbox smaller. However I think it’s the same size.
@Burasta
4 жыл бұрын
Did you try it with regular batteries before connecting a lipo?
@drflux
4 жыл бұрын
No but I know that works
@Burasta
4 жыл бұрын
@@drflux Thanks. I have the grey trigger model and it only gets about 50fps.
@lad3273
2 жыл бұрын
Does anyone know if NFstrike still sell these? Link bring you to a blank page
@brellcooper1337
2 жыл бұрын
You can get them on Amazon now
@timmhaven.j8355
4 жыл бұрын
you need a lab coat
@diggyperfecto1667
4 жыл бұрын
Dr Flux its diggy from discord would you be willing to do me a commission on a regulator for me and u name your price
Пікірлер: 53