What does it mean if the machine lights up and blinks, but DOES NOT MAKE NOISE or dispense water? Is it the heat fuse? Or the pump? Thank you 🙏
@carmencarrasco4714
Жыл бұрын
This is our second K-Classic. We had our first one for many years, so when we had to replace it, we wanted nothing else but this exact kzitem.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf model. We use it for about three people everyday in the morning. The taste and quick brew is one of the reasons we like it so much. There are so many choices of brands of coffee that we would grab what was on sale and test the different brands from there. I would definitely recommend trying different brands of coffee to find the ones you like the most because there are brands that quite frankly taste horrible.
@levanimarkozashvili3672
6 ай бұрын
Hello friend, my Nespresso gets hot, but when I start it, it does not make a sound (the pump does not turn on). What could be the reason?
@miss-ck3xf
6 ай бұрын
What if the machine is not making noise?
@АнтонКузнецов-у6г
Жыл бұрын
What if the pump does not switch? I push right button but it blinking and nothing happen. I mean no sound. It happened at cleaning process. The machine just stoped.
@annatsimpou4227
2 ай бұрын
I have the same problem.First water wasn't running and then after pressing the button numerous times it stopped working.No sound at all.Is there a possibility we could fix this?
@alisonbickerstaff1675
Ай бұрын
@@annatsimpou4227 mine too. I descaled and when I went to use, nothing.. no sound at all but all lights working
@jayhudson365
Жыл бұрын
Great directions! I tried everything to get mine to work and finally tore it down to get the pump working again. It’s working now as good as new. Thanks!
@JohnNy-ni9np
7 ай бұрын
How the coffee with rusty water tastes like ? I think once the spring is rusted the rust will come back again.
@chishalanata9082
21 күн бұрын
I have a Nespresso citiz machine with a milk frother but recently i found that the machine is not coming on,I mean no lights but the milk frother is working perfectly.what can be the problem
@martinb4729
3 ай бұрын
Thanks for this guide. Instead of buying a new machine, I decided to try and repair it. Replaced the pump, and now it works again. But damn those oval head screws are a nightmare. Made the tool, and it helped, but will go to hardware store and see if I can get some replacements that are easier to work with. BTW, recommend to disassemble machine first, so you can identify the exact pump type. The website where I bought the pump, suggested a different pump type for this machine. Not sure if it was compatible. Anyhow I found the exact same pump that was originally installed, and purchased that instead.
@67hr74
Жыл бұрын
Thank you Adrian for your videos, although I live in Australia you provided enough info for me to fix my machine, It's Delonghi Citiz coffe & milk unit after watching your video's. I didn't realise they had oval head screws and couldn't find a bit locally, so I drilled about a 3.5mm hole in the end of a 6mm cap screw then gave it a hit with a hammer to make it oval. This worked well and enabled me to complete the swap. Many thanks, I've enjoyed a nice coffee now after a 2 week wait for the new head.
@kitesurfireland
10 ай бұрын
Where can you buy the tool for the oval screws. No matter what I do I can’t get them out
@speed_rider362
Жыл бұрын
What a horrible machine to mantain. Just plain awful to work on. I have the same unit, so I will brace myself :)
@gregercolano8032
Жыл бұрын
Nice. I have a new machine that isn't working, so while it surely doesn't have rust/scaling issues, it might still be the pump somehow. Tried all the usual ways to get the water flowing (using hot water in the reservoir, removing/replacing the reservoir repeatedly while the pump is running, putting pressure on the water) and no joy. No bubbles come up in the reservoir either. Was thinking of taking it apart, and just running the pump directly with a small primed hose, but I see it's a pretty big deal; I'm worried about breaking the plastic opening the clam shell sides. Also "oval" screws? Yuck. For rust issues, I've found soaking rusty parts in white vinegar for a few hours or overnight does wonders for getting rust off. I'm probably going to return the unit I have; I'm not taking apart a new machine. These things are obviously badly designed when it comes to the pump/priming system; sooo many people have trouble getting the water running. There should be an easy way to prime the pump.
@miguelmalave529
3 ай бұрын
Hi I have a Nespresso Citiz, and it is having a problem that it is extracting coffee grounds or coffee beans at the same rate, what could be causing this problem?
@nohoariivernaudon7285
Жыл бұрын
Bro your flowmeter is broke change it then you can adjust the dose man 🤘🏾 big up i work for nespresso 🙏 by the way great work
@loujay2765
Жыл бұрын
Is this easy and cheap to replace and send off - think that's the issue with mine as small amount coming out
@gertdewit2367
Жыл бұрын
Thanks for the video, I was able to fix the leakage! Keep up the good work🙏
@ritchiek9587
Жыл бұрын
Hi Gert, liep bij jou het water door je residubak (waar de cups in vallen)? Ik ben nog zoekende naar een oplossing namelijk. Benieuwd of het dit type lekkage was. Mijn machine perforeert de cupjes niet en daarbij lekt het naar onderen. Alvast bedankt. Groeten
@gertdewit2367
Жыл бұрын
@@ritchiek9587 De cups werden wel geperforeerd maar ik had te veel lekkage. Later bleek de oorzaak vervuiling. Na demontage en reiniging was het probleem verholpen.
@georgealshaikh3773
Ай бұрын
Thanks for your videos , it’s wonderful ! I have 2 machines need maintenance and I’m not able to do it my self ! Can you advise me what to do please ?
@marviedgar2657
3 ай бұрын
Thank you, but my machine is still leaking after I changed the o ring... Any ideas?
@georgealshaikh3773
Ай бұрын
I’m in Ukraine !!!
@georgealshaikh3773
Ай бұрын
How to reach you ? Or do you advise me how reach someone who can help me ?
@benassy69
Ай бұрын
Hi contact me on instagram adrian_benea
@rafanagigancie236
Жыл бұрын
Czy będzie filmik o BMW 320D
@rickyoungjr4623
4 ай бұрын
Will this work on a Chefwave Expresso maker??
@BarryKing-b1g
Жыл бұрын
Unable to remove pod. Arm will not lift to bring nozzle ! part forward to extract pod. Machine did make strange noise when putting pod into machine.
@MrTheraseus
4 ай бұрын
heyAdrian, great video! any tips on how to fix a stuck button on this model? i have to press really hard to get the ristretto / short button to work, and that makes it hard to go into descaling mode, etc. appreciated!
@benassy69
4 ай бұрын
Hello. Clean the metal pads under the buttons with alcohol.
@sambharr
6 ай бұрын
The magic is in the magic screw tool (adapter). How do we get one?
@MrFrostiesBuddy
8 ай бұрын
I disassembled the pump, no rust, reconnected, still not flowing water. Is my pump bad? I tried to force water through the inlet pipe that goes through the water sensor and into the pump with a syringe, while pressing Lungo, it would not take the water in, and only a little was dripping out
@Celeeny
5 ай бұрын
Same here... did you find a solution? Mine is still not working after the tutorial
@victorbaxter3577
Жыл бұрын
I have a Nespresso Virtuo Plus machine that is leaking. I can't even figure out how to get it open. I can only find one screw and when I take it out, nothing loosens up. Can you help?
@jasonparedes8806
3 ай бұрын
where do you get that tool or how do you take it off without that tool
@franceshmr
Жыл бұрын
Thanks as always for such informative videos! Would you please be able to make a pump repair video for the Pixie model?
@DVD-i3r
Жыл бұрын
Very helpful video. Thanks a lot Adrian.
@miss-ck3xf
6 ай бұрын
Vinegar cleans rust
@russel242
9 ай бұрын
will the water be in contact with the rust?
@yerrys1313
Жыл бұрын
Can you please tell me what kind of lubricant you used ?
@benassy69
Жыл бұрын
Statoil Greaseway ALX 82
@tomsahag
Жыл бұрын
Great video and it worked for me but after I put my Citiz 112 back together I am getting a 2 quick blink pause 1 blink on the espresso button. Any idea
@benassy69
Жыл бұрын
Be sure the buttons are fitted correctly. This behavior sound like one of the buttons is always pushed.
@zxborg9681
Жыл бұрын
Wow, what a good explanation and teardown. This is just what I need! Thank you.
@yit1788
Жыл бұрын
What should I do? My Nespresso machine does not shut off.
@benassy69
Жыл бұрын
You have a button problem. Remove the rubber part of the button and clean it with alcohol.
@mfelipetc
Жыл бұрын
I wonder if there is a way to make this pump make less noise...
@benassy69
Жыл бұрын
Yes. Disassemble it clean and lube. I have a video on how to.
@LyesMR
Жыл бұрын
Thank you for the video, however could you pls show what tool do we use to remove the 6 bolts.
@stalincat2457
Жыл бұрын
I used a side cutter or needle nose pliers to grip the bolt heads and twist them out.
@RocheHimself
Жыл бұрын
It's a goddamn expedition but it worked! Thanks for sharing! Totally worth the watch!
@darwinholm5720
Жыл бұрын
All that was not necessary. If you take your water container and slowly set it on when the motor is trying to pump, air bubbles will come out, and it’ll pump water. It takes about 10-20 seconds.
Пікірлер: 56