Great video! I’m not one to post a comment but this sir was deserving of one. The explanation was clear and simple to follow. I found where the block was and cleaned it out, plugged the machine back on and viola! It was working again.
@michaellim6292
Ай бұрын
Great video. I had the same problem, watched dozens of other videos, I found your instructions excellent, I cleaned the overflow and save myself buying a new machine. Thanks Edward
@mycroftai
9 ай бұрын
Many thanks. Turned out that my outlet was partially block by a chunk of scale/coffee causing excessive overflow. Would never have found it with out opening it up. Excellent work sir...
@juanpabloserrano2517
22 күн бұрын
Kudos Edward. This was great. As for the side panel, mine was very hard to move. I used a small screwdriver in the corner to help me push. It went off easily.
@amanda.b
Жыл бұрын
Mine was leaking coffee from somewhere than what you described, but opening it up and cleaning it fix the issue! I’m so relieved, thanks for the great and easy explanation!
@Epic4B11T
Жыл бұрын
Thanks! After about 1000 capsules mine developed a leak around the nozzle, this was the fix!
@marc1al90
3 жыл бұрын
Fixed my machine thanks to your video. A million thanks. 👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
@mikebernasiewicz481
2 жыл бұрын
Thanks. Fixed my machine after this video. Easy. Panel removals a bit sketchy as you’re afraid to snap a clip but I pried it a bit with a flat head. Easy after that.
@pitbull12384
6 ай бұрын
what a great and simple follow clip. One big thanks. I'm experiencing a different problem, aloud noise when brewing start and only a small amount of coffee is then released. My uneducated guess is the bearing, but how to replace it without destroying the machine. Maybe somebody had a similar experience with a solution
@azizelhessaini6403
5 күн бұрын
Hello, thank you for your explanation of how to disassemble the NESPRESSO KRUPS. Is it possible to show me how to disassemble the rest please, thank you. Best regards.
@kristinadavis8397
6 ай бұрын
Thanks so much for this video. It really helped!
@andreaschmidt7928
3 жыл бұрын
Helpful.. mine leaks occasionally as well. I just Descaled it..hopefully it breaks up the gunk in the overflow tube as well. Thanks!
@uconnkoala
11 ай бұрын
YES! Thanks so much, this fixed my leak.
@billythepuppet584
Жыл бұрын
You fixed my machine ❤️
@edwardhhsu
3 жыл бұрын
Hi jRo, I was notified that you had a question. I just used a thin flat screwdriver that fits in the star thing.
@pauldigiacomo6137
Жыл бұрын
The proper tool is a T10 security bit if you do not have it you will struggle
@xmanual
Жыл бұрын
Very helpful! Thanks so much!
@lust4lyfe101
Ай бұрын
Can you show exactly how you remove the screws from the bottom?
@robertwilliams258
Жыл бұрын
Thanks for the great video. My machine is no longer leaking after following your instructions The overflow tube was completely clogged which was causing the leak as you said. Wasn’t easy to clean it out but ended up using a long qtip and rinsing out with a syringe. Is there a way to pull out the tube to make it easier to clean? Probably needs to be done periodically.
@kevinmccarthy6091
2 ай бұрын
Great video. I have the same leak. I ignored it for months. Now the machine trips the power as soon as i turn it on. Without brewing a cup of coffee. Any idea what the problem could be?
@Mel-md6cb
3 жыл бұрын
I’m having a weird problem with mine…the button doesn’t work. It’s solid White…good to go, but when pressing the button, nothing happens. I also have water in the round cup that the pod sits in. I have a feeling that it’s clogged…not allowing the water to fully drain into the coffee cup.
@edwardhhsu
3 жыл бұрын
Unplug. See if you can clean the key pad area. Good luck.
@Dorall
Жыл бұрын
Ty bro
@KimNguyen-qf2mw
2 жыл бұрын
What is the tool name did you use to take out the screws for the machine?
@Smunsky
2 жыл бұрын
Here's a little trick Push the capsule holder with toilet paper or paper towel to remove excess water from the cavity and it prevents leaks
@tkjho
Жыл бұрын
@4:02 The overflow tube should go into a receptacle and not into an open space that can drip down to an expensive marble countertop to stain it.
@DarrissaF
3 жыл бұрын
My machine is leaking water & ive only had it a week now
@stevenmobley5882
2 жыл бұрын
Depending on the machine, some people have had luck with flipping over the gaskets found where the water enters the spinning capsule from above. There is another video showing how to access this. Seems like they have a lot of issues with this particular design because the capsule is spun up to 7,000 times a minute to develop crema with what seems like less pressure.
@e-mike9776
Ай бұрын
Biggest junk i ever bought, first machine broken, second after 1 month of use. never again. utter garbage.
@meganryan2366
2 жыл бұрын
complete garbage product, im on my second 1, they dont last more than a year. i buy a new 1 and return the old one in the box
Пікірлер: 31