Love your videos, they are so helpful. Thank you! ✌🏼
@JanGarciaRN
2 жыл бұрын
Thank you so much for watching. Merry Christmas. 🎁
@deborahschweikert4263
2 жыл бұрын
Thank you!
@janeenlewis_BearPawTumbers
2 жыл бұрын
Love this, was very helpful! May I ask what size did you make her name?
@JanGarciaRN
2 жыл бұрын
I’m sorry I don’t remember. But here is the link to my pen tutorial. I believe you could fast forward to the section where I make the name and it will tell you the size. Thanks for watching.
@terrybingham9524
11 ай бұрын
Thanks for the video. One question after you spray the pen you say to then apoxy it. So, this is a step you don’t show but needs to be done after the spray?
@JanGarciaRN
11 ай бұрын
Yes. That is correct you have to seal it with epoxy. It may take you a couple of coats of epoxy to get a smooth surface.
@MissAlex480
2 жыл бұрын
If my pen is already sealed and I had to remove the sticker. Can I just seal the sticker with e6000 without having to resin it again?
@katiecraig2476
3 ай бұрын
I really want to try this, but I’m kinda scared! I don’t have the spray, only the regular clear E6000. So I’m afraid it won’t dry clear. Especially since the background of my tumbler is white and the vinyl in question is black. I’m scared it’ll show once I epoxy. Thoughts?
@JanGarciaRN
3 ай бұрын
Don’t use the regular e6000. The one I use is more like an Elmer’s glue. It seals the edges and dries clear. The I spray with the clear spray paint. It’s the only steps that I could figure out to stop my vinyl from lifting.
@jennytaylor3324
Жыл бұрын
Thank you. Do you ever seal these type of decal? Going to be trying to make large vinyl type stickers adhere in a professional way to some small waste paper bins, to sell potentially. Any advice?I love your pen idea, btw!
@JanGarciaRN
Жыл бұрын
Hi Jenny thanks for watching. If you are talking about the waterslide I do seal it with clear spray paint before I epoxy. If you are talking about vinyl, get a permanent vinyl and I think you will be fine without sealing it. I have seen some cups made with permanent vinyl and nothing over it and it stood up great even in the dishwasher. I just feel for a cup it looked unfinished and wanted so badly to teach the creator to use epoxy or crystalac to help with the finished look. For a waste paper bin I think it would look fine. Happy creating.
@jennytaylor3324
Жыл бұрын
@@JanGarciaRN Thanks for your reply. I'm very new to this world, and as a vinyl novice I don't know what permanent vinyl is. Not using homemade images, but freeze type wall decals from China. Look well made, but I don't know if they'll stick fast over time on plastic surfaces. Some research suggests adding a decoupage adhesive like Modpodge under them, and possibly to seal also.
@JanGarciaRN
Жыл бұрын
@@jennytaylor3324 yes you could try that if your not wanting to delve into the world of epoxy.
@maryannfields33
2 жыл бұрын
Thanks for sharing. Did you epoxy your pen before adding the decal?
@JanGarciaRN
2 жыл бұрын
Yes. I painted it white. Then I put on one coat of epoxy with white mica in it. No glitter in this pen yet. I applied the water slide then sealed with 2x ultra clear, then added name decal, E6000 then another coat of 2x ultra clear. Epoxied over them both with a coat of epoxy with ultra fine glitter in it to make it sparkly. Sometimes 2 coats of epoxy to get smooth finish. Just depends. . Hope that helps. Jan
@maryannfields33
2 жыл бұрын
@@JanGarciaRN thank you so much for clarifying that. Great video!
@baileyphillips3200
2 жыл бұрын
Does the e6000 dull the color of the vinyl?
@JanGarciaRN
2 жыл бұрын
No. But The only one it may make look a bit cloudy is your shiny holographic vinyl so I make sure to wipe the glue off with a bit of alcohol or even water or baby wipe before using the ultra Matt clear spray. Really your only using the glue to seal the edges otherwise everything looks perfect after the epoxy. Matt clear spray alone is not enough. The vinyl will lift.
@kristinagarcia8204
2 жыл бұрын
What is the font called that says NICU?
@JanGarciaRN
2 жыл бұрын
joyful unicorn
@ivanvalentin3898
Жыл бұрын
That's a lot of steps for a pen
@JanGarciaRN
Жыл бұрын
Yup that’s why I dont sell them for $5.
@jennifernutt3633
Жыл бұрын
Well rather doing the steps then having vinyl lift after all the work you have done
@datMNboi
2 ай бұрын
Did not work - followed directions exactly. Ruined my project.
@JanGarciaRN
2 ай бұрын
Hmmmmm. I’m sorry. This is the only thing that works for me.
Пікірлер: 29