Nice video thank you. They have two at the tractor supply and I am thinking of getting one tomorrow. I have the Coleman CT200U-EX and I love what Coleman has upgraded on these. So rad!
@amysingleton1394
8 күн бұрын
How to change the oil??
@simplemann101
7 ай бұрын
Got the exact same model at the tractor supply in Kuna ID last weekend. Keep an eye out, they will show up.
@kiheirc3195
2 ай бұрын
Great video still riding old rigid frame c200 need this bike after basic mods I’ve had my old bike up to 46 mph it’s scary thanks again brother
@MrJbrew69
Ай бұрын
Those motor mount / platform rubber bushings have been giving riders issues after upgrading the engines like doing a stage 2, etc. the fix is getting cnc machined aluminum bushings that red beard garage sells. It’s a pain to get them installed because you must remove the engine and platform, knock/ drill them out and then install upgraded ones. I just purchased one from tractor supply yesterday and I’m getting everything lined out to start upgrading it. Getting a stage 2 kit for the 196cc clones, EC Carburetor sells the kit for around 300 I think.
@jesseaquino7609
Ай бұрын
@MrJbrew69 yes I'm aware of the subframe bushing issues ..but thank you👍🏼.. these bikes have some quirks but are great platforms to build
@S200.
7 ай бұрын
Wow looks better than a Trailmaster stock. Saying this as an MB200 owner I’m a bit jealous. Maybe the only down side is that it might bottom out more often
@esmoglo
9 ай бұрын
Just picked up the B200R I wish they had this one tractor supply, but they didn’t you got lucky for sure .
@DougTraylor-lj4jm
2 ай бұрын
The holes near the rear shock tops are a great position to move the top mount to after they are drilled out to fit the bolt. This makes a huge difference in the performance of the shocks and raises the bike a little bit.
@jesseaquino7609
2 ай бұрын
Im aware of that mod but thank you..I installed the Rob Morris swing arm extensions and 320mm rear shocks
@erikmendoza312
9 ай бұрын
I also bought the same bike bout a month ago and it is fun to drive.. now I weigh bout 250 but this thing still moves with that weight
@jesseaquino7609
9 ай бұрын
Yeah im 260 and I get around just fine
@williamsantiago7303
4 ай бұрын
I love how they cheaped out on the bracket where the handle bar's mount. They made it real THIN. My Colman BT200X has a really thick mount, so I understand why they went so thin on this bike. Other than that, it's a good-looking bike. I might have to go out and get one myself.
@jesseaquino7609
4 ай бұрын
You are not the first to point this out ,but the bt200x also has cast clamp which could be arguably weaker and more susceptible to cracking. Also coleman went to this style along time ago with the rb200 for two main reasons the shocks are bigger and the head tube is much bigger and uses a larger automotive bearings ..the bt200x uses a skateboard style bearing and the are prone to blowing out ..but either way I have experience with both frames and both are very strong I wish the bt200x got an update.
@danpost18
8 ай бұрын
I bought a b200r on tractor supply black Friday special I wish they would have had this model in stock. I saw 2 of them at the Lubbock Texas store last week. So I am going to save just in case I see another one. Thanks for video. Can you post a video on how you increased speed on your bike. Thanks.
@kevindirt4108
7 ай бұрын
The model that just under that with everything but those rear shocks is the B200 I haven’t really seen any reviews on that one either
@jesseaquino7609
7 ай бұрын
The B200 is a great bike ..It has alot of improvements over the B200r . Honestly if your a fan of rigid bikes that's the one to shoot for 👍🏼
@buckpotter3184
8 ай бұрын
Buck Potter KZitem channel we love carnage keep up the good work❤ oh yeah thumbs up for this video homie
@user-my6lk9vq5d
7 ай бұрын
Do an update on it how do u like it so far
@knife_knut
9 ай бұрын
SWEET!
@Deucealive75
9 ай бұрын
They must have did something different with the torque converter. You shouldn't need a zip tie to get to 42 mph with that gearing. They may have put a speed limiting spacer in the driver so the belt cannot shift all the way. I think the rubber bushings for the engine plate is a mistake. Didn't work out very well on the Trailmaster's. I guess we'll have to wait and see. Wouldn't be surprised if it outweighs my 200u by 40 pounds.
@jesseaquino7609
9 ай бұрын
Speed seems pretty average for this setup. I have a few bikes and yes alot of things play a factor ..the TC is a pretty standard unit given the belt is brand new I might see a few more mph after it breaks in... and yes it's heavier than most bikes but is built alot stronger. This is a great platform for trail riding
@teshuvahemmet3036
8 ай бұрын
Nice ride thanks for the information
@SpAcEcruizer203
9 ай бұрын
Go get It boyZ💪🏼💯💨💨💨💨
@mpatterson31
9 ай бұрын
What part of the Garden state I’m in the capital let’s ride
@bananwahs_pnw
Ай бұрын
Can you do a video on zip tying the governor?
@nowayjose4073
10 ай бұрын
Can't find 5 anywhere
@user-ic4tt9ul1c
8 ай бұрын
Where can u get this from I been looking for one but I can’t find one
@bbaaspencer1
8 күн бұрын
My tractor supply has been selling them.
@saberocha2579
4 ай бұрын
Was the bike already assembled when you got it at tractor supply?
@jesseaquino7609
4 ай бұрын
Yes it was pre-assembled on the showroom floor ...but I did go over the whole bike and tighted any bolts and nut that needed it ...if you order online and have it shipped they come partially assembled
@user-mt6xz9ho4v
5 ай бұрын
Tractor supply only ask in store to order it. That's what I did. All you can do is ask
@Truerican213
3 ай бұрын
I meant more so for the tires. Can they handle the street roads to ride on? Or will the bike get messed up by riding it on the street rather then trails or grass etc.
@jesseaquino7609
3 ай бұрын
The V treads tires from the factory are definitely not the best but they hold up just fine in the street they suck for the dirt though...definitely worth the upgrade either way ..SunF has some nice options or Kenda
@jmahney5530
6 ай бұрын
❤
@710daddy6
Ай бұрын
I need details on how to do the zip tie governor trick.
@jesseaquino7609
Ай бұрын
@710daddy6 under your gas tank there is a spring connected to the governor arm. You need to snake a small ziptie through the spring and zip it tight so the spring compressed . Doing this will not let the governor arm engage ..do this at you own risk though the stock flywheel is not rated for the higher RPMs and have been know to break apart..if you keep it like this long term I suggest a stronger billet flywheel for safety
@potatosurfing6779
7 ай бұрын
i am proud of coleman for that
@Irie.Explorer
10 ай бұрын
So you can change the rear suspension and swing arm to lower or lift the bike?
@jesseaquino7609
10 ай бұрын
Just checked today those holes are not to raise and lower the bike sorry for the misinformation 😢
@Truerican213
3 ай бұрын
Can you ride this on the street? Or does it have to be ridden on trails only?! Like can the tires handle the road pavement?
@jesseaquino7609
3 ай бұрын
It depends on your state im in nj ..so it's not street legal ..however it is sold with an mco so you could go through Dirtlegal to get it street legal
@braydenlowe2024
10 ай бұрын
Is this available for purchase both in store and online at the Retailers?
@jesseaquino7609
10 ай бұрын
I purchased From Tractor Supply in NJ it wasn't listed online
@braydenlowe2024
10 ай бұрын
@@jesseaquino7609Thank You For The Information!
@samsnephew3209
5 ай бұрын
Money well spent
@prestonfennell
3 ай бұрын
how did you zip tie the governor
@jesseaquino7609
3 ай бұрын
Underneath the gas tank there is a spring ..pass a ziptie through the spring and pull the ziptie tight to prevent the spring from expanding...also there are a bunch of videos on this..hope it helps...be aware this let's the motor exceed the rpm that he flywheel is rated for so I would look into getting a better flywheel the stock ones can break apart so do this at your own risk
@daox817
7 ай бұрын
where i can get that
@jesseaquino7609
7 ай бұрын
TRACTOR SUPPLY
@SportbikerNZ
6 ай бұрын
Next time watch the video where he clearly says.
@ricardohz5148
9 ай бұрын
Can this keep a battery charge? Do you know what wires
@jesseaquino7609
8 ай бұрын
No doesn't put out enough to keep battery charged . Search dual charging coils
@noaheckerle1611
9 ай бұрын
Is this better than the trail master?
@jesseaquino7609
9 ай бұрын
I wouldn't say better but I would comparable ..its cheaper then the trailmaster with the same options
@miguelpagansr6128
2 ай бұрын
That’s the one I don’t care for, those tires are crap. The best upgrade is street tires for a smoother ride.
@jesseaquino7609
2 ай бұрын
The bike has been good to me so far ..but I would agree the stock V treads are crap..I swapped mine out for some sunf power2s because I trail ride
@Hesham2008A
9 ай бұрын
why do lot of people like you keep them stock? Maybe not you, but I see more then expected people keeping them totally stock, like people really dont be adding a exhuast and air filter? haha Even if its for a young one, I mean young one as in 12+ (not talkng about sum 8 year olds cuz aint no 8 year old should be on this 😂😂) I would still add a exhuast, feel like you gotta no matter what. Not even or power, just better sound and looks. That bike is one hell of a nice thick looking bike, gotta love it!!
@jesseaquino7609
9 ай бұрын
Relax man i agree with you and it won't stay stock for long lol..im pretty passionate about modifications aswell. That being said I like to keep the bike stock for a while that way when you finally modify you can really appreciate the power increase. Plus I have multiple minis , my Rt200 has built 224 and custom mono shock full suspension . Either way stock or not this bike is rad!
@Hesham2008A
9 ай бұрын
@@jesseaquino7609 my bad wasent trying to come off the wrong way 😅 just seen lots of people keeping them stock and would be confused, as you said regardless she’s a reaper
Пікірлер: 62