Very nice! I’ll hold on to my SS34 and add the CoreSS.
@robcarr8505
5 ай бұрын
Great video!!! I get bored easily and you kept my attention the entire time. 😆
@MickyMouseLimited
10 ай бұрын
I wish they had included adjustable draw stop so you can change the let off. They have it on the target bows and it is really nice.
@jackbuendgen389
10 ай бұрын
I would have liked to see that too. But the average hunter will set it to max let off and call it a day
@pokerman9108
10 ай бұрын
can you swap the cams out with the target bow cams?
@tommywagoner7669
10 ай бұрын
Purchase a set of Lucky Stops draw stops. You can then customize draw length and letoff % by rotating the draw stop to different positions
@jackbuendgen389
10 ай бұрын
@@tommywagoner7669 I got a set of those for my ss34. They're ok. Without a draw board it's kinda tough to get the stops in just the right spot
@stevenl4494
6 ай бұрын
On the surface, or on paper, those are some impressive features - especially for those that'll DIY. And...I'll DIY just about anything, especially bows. 🙂 Any experience with string stretch, or wear? How about the timing adjustment feature?
@gilbertlongboat5081
8 ай бұрын
Will there be other sight manufacturers making sights, or is it limited to Black gold ? I hope others step up and make them too, just so we have some options !!
@miket8018
10 ай бұрын
Man it's a fun time of year to be an archer.
@jons7e
10 ай бұрын
SS on performance vs SR on comfort 🤔
@Texaslivinoutdoors
10 ай бұрын
My Bowtech BTX31 I bought in 2016 has a timing adjustment. Idk why everyone is acting like this is something new
@tjdreyer
10 ай бұрын
That performance setting dump at the end looks nasty, especially in that slow motion footage.
@jasonnester9514
10 ай бұрын
Sure does
@jasonreedman4648
10 ай бұрын
A shame there’s nothing new for the long draw guys 😢
@MonstaFreak13
8 ай бұрын
How long of a draw you looking for? the SR goes up to 33" 😂..
@GreysonShambaugh
8 ай бұрын
Not sure of the draw length on these, but I’m sure you can get a killer deal on a SS34. I love mine, long draw archer as well.
@gilbertlongboat5081
8 ай бұрын
The Sr only goes to 30 inch draw length, it’s axel to axel is 33 inch 😂
@MonstaFreak13
8 ай бұрын
@@gilbertlongboat5081 yea i saw that later when i found one in store and tried to buy it but it was too short. The SS has the longer draw
@grappler84
10 ай бұрын
Love the runing options on these.
@rayhickman1191
10 ай бұрын
Great video PJ, put some 12 buttons on that baby!!
@brucehillbillybarthalow3786
10 ай бұрын
Great video. I'm curious, would the Mathews bridge lock sights work here. Man a lot of screws,has any of this stuff ever vibrated loose?
@LancasterArcherySupply
10 ай бұрын
No, they won't. There are some Black Gold sights that will fit these bows and that's it for now.
@SandySmith-qd1ku
10 ай бұрын
Mines has string serving separation on the cams after 20 shots :(
@BruddaMan808
10 ай бұрын
Awesome!
@Rowtrac380
10 ай бұрын
Nice
@genehalteman882
10 ай бұрын
Where's a video on the Justice?
@takedowngaming3771
10 ай бұрын
I wish they’d change the skeleton handle
@vanya65
10 ай бұрын
This is what hoyt needs
@barbellsandbowhunting
10 ай бұрын
Looks like a newer version of my 2009 Admiral
@googleslayer5625
10 ай бұрын
Question PJ, who is going to stand up for the customers that bought Bowtech bows with cams that chew cable servings because of burs and sharp angles? Could you talk about that? Bowtech puts crap strings on their bows and then tries to deny accountability. Are these cams the same design (looks similar but I'm not an engineer) that's going to eat cables like the SS34 and others?
@jackbuendgen389
10 ай бұрын
I dumped my ss34 for that exact reason. The stock strings had 6 places the serving was unraveling! After market strings were no better.
@jasonnester9514
10 ай бұрын
Who cares if serving wears doesn’t stop bow from shooting well
@jackbuendgen389
10 ай бұрын
@@jasonnester9514 until your cable gets shredded and the bow explodes! 🤣
@jasonnester9514
10 ай бұрын
@@jackbuendgen389 my serving isn’t wearing at all man no issues
@jackbuendgen389
10 ай бұрын
@@jasonnester9514 then why are we having this conversation?! 🤣
@ngyy
10 ай бұрын
What is the point of cam tuning? If I have paper tear, can't I just adjust the rest?
@optimuscrime608
10 ай бұрын
You never want to move the rest. The rest should always be at centershot. Move the cams
@stevenl4494
6 ай бұрын
@@optimuscrime608 Yup, prefer to move the cam as a first resort....if you know you're dead set on centershot.
@jasonnester9514
10 ай бұрын
2024 bows coming out already Jeeze they move to fast it’s getting ridiculous
@joshfeister6566
10 ай бұрын
The more moving parts you have the more they can go wrong
@poppasmurf15
10 ай бұрын
Or just keep buying the same Mathews every year since 2014 and pay another $1500 every year.... I'm glad Elite and Bowtech at least push technology, and not just influencers and old tech.
@Buran01
10 ай бұрын
That's why with Mathews bow shops has to order thousands of $ in cams: they are the "unmoving parts" XD
@partnerj11
10 ай бұрын
Bowtech needs to just stop making bows… that thing is so loud 😂 and so many things to fail
@sawyertward2655
10 ай бұрын
Dude you probably shoot a mathews like everyone else, top hats are the worst system out there
@jasonnester9514
10 ай бұрын
@@sawyertward2655I’m not crapping on your comment but I am curious why do u feel too hats suck I don’t own Matthews worse rlol
@optimuscrime608
10 ай бұрын
@@sawyertward2655I’m an Elite guy but I have to say that Mathew’s tophat system is one of the best there is. Once it’s swapped to the correct tophat you don’t have to touch it ever again. Very good system
@sawyertward2655
10 ай бұрын
Totally a joke😂 I’ve always been a mathews guy and I’ll be a mathews guy probably forever haha
@jasonnester9514
10 ай бұрын
@@sawyertward2655 oh hahahaahah I’ve own 2 mathews wasn’t disappointed in em I had the switchback and halon 6 they were good bows I ended up getting a prime and Bowtech only because I got the prime at cost and Bowtech gave me huge bet discount I can’t budget a new mathews but they make good stuff for sure
@tochamp5441
10 ай бұрын
I might be switching to bow tech
@Huntfishtrapgather
15 күн бұрын
I am after shooting Mathews for so long. Between the reoccurring bearing issues I’m having and the limbs splitting…they’ve just left a bad taste in my mouth! Still great bows just lacking in quality lately
Пікірлер: 55