Audi started the efficient and sustainable production of the new Audi A5 and S5 models in Neckarsulm. Enjoy it!
SUBSCRIBE for more!
MORE DETAILS ABOUT THE PRODUCTION:
With the new Audi A5 family, the first models based on the Premium Platform Combustion (PPC) with partially electrified drive systems and new electronic architecture are rolling off the production line in Neckarsulm. The brand with the four rings is consistently gearing vehicle production towards sustainability. The goal: In line with the "360factory" production strategy, all models manufactured at the Neckarsulm site from 2025 will be net carbon-neutral. To achieve this, Audi is relying on more efficient production lines, a higher degree of automation, and innovative technologies. From 2025, the renovated paint shop will be one of the most modern in the automotive industry.
In Neckarsulm, Audi relies on modern and effective methods to prevent corrosion. Cathodic dip painting, for example, includes dipping and rotating the body upside down in the tank using a rotation process. This is more space-saving and thorough, as it avoids minimal air bubble formation and dirt deposits. A new, more energy-efficient process is also used for drying the cathodic dip coating. Instead of the previous external drying process, a so-called transverse drying process is now used. Air is blown into the interior, and the body is heated from the inside. In addition to being more energy efficient, the transverse dryer is better suited to future electric and hybrid vehicles and their strengthened floor assemblies.
A high degree of automation for premium quality
Neckarsulm is the first site in the Group to install all add-on parts in the body shop fully automatically. In this way, Audi improves the fitting accuracy of the add-on parts and minimizes external influences. Seven robots are used simultaneously for the highly complex fender attachment alone.
As part of Audi’s "360factory" production strategy, its supply chain relies on the smart, automated provision of materials. Automation roadmaps have been created for each location and are gradually becoming a reality. Neckarsulm was the first Audi site worldwide to put the freely navigating, driverless transport systems (DTS) into operation back in 2014. With the start of production of the new Audi A5, over 80 percent of the material volumes in the body shop are now provided automatically.
Virtually smokeless fixing is a world-first in car body construction. It involves attaching glued components, such as doors with small soldering points, to prevent the inner and outer parts from slipping. Previously, numerous soldered fixing points had to be cleaned, as smoke is corrosive. The new process almost eliminates residue build-up thanks to a rotating gas flow. Audi works more than twice as fast with the new method compared to previous techniques.
State-of-the-art quality monitoring in the body shop
Quality control measurements in the body shop are mainly carried out inline, i.e., without removing a vehicle from the line. New measuring technology is used at two stations. Four robots at each station use measuring sensors to determine the components' dimensional accuracy. The measurement result is evaluated using software, visualized, and made available to the employees. With this new technology, every vehicle produced can be measured directly on the line. Consequently, Audi significantly increases the number of measurements and can react faster to any deviations. Continuous, interruption-free quality control is also possible thanks to the high degree of automation.
Employees use innovative technologies such as augmented reality (AR) to inspect car bodies. An AR app on commercially available tablets with an integrated camera shows the connection points to be checked in real time. This makes it possible to check and directly document whether, for example, weld seams or points are present and executed according to target specifications. The increase in efficiency through digitalization is enormous. For example, inspectors once had to go to great lengths to determine the specifications for a bonded seam. With the tablet, this work is now done in just a few seconds.
Source: Audi
#AudiA5production
#AudiA52025production
#AudiA52025productionGermany
#AudiA52025productionNeckarsulm
#AudiA52025productionNeckarsulmplant
#AudiA52025productionworldpremiere
#AudiA52025productionnew
#AudiA52025productionnewA4
#AudiA42025production
#howisAudimade
Негізгі бет New AUDI A5 2025 - IMPRESSIVE PRODUCTION process in GERMANY (Factory NECKARSULM)
Пікірлер: 3