Thanks for the review. I'm always worried about the inherent risk of buying cheaper when it comes to tools but in this case it looks like my worries were unfounded.
@eli-barrrunforge5823
Жыл бұрын
Thanks Will! The quality of it was surprisingly good
@robertlonis9350
Жыл бұрын
Love tuels day ! You gotta love a forge when the burner can double as a didgeridoo😊
@eli-barrrunforge5823
Жыл бұрын
Yessir! Always finding different uses for tools in the shop
@metalblueberries3742
Жыл бұрын
Awesome video. Thank you. BARF forever.
@eli-barrrunforge5823
Жыл бұрын
Thank you Bluebs!
@lukechioatto9167
Жыл бұрын
Thanks for this!!! I just bought one and was anxious about setting it up (visual learner).
@BarrRunForge
Жыл бұрын
Excellent! Hope it helped. God bless.
@MTHomestead
Жыл бұрын
Good video! Thanks for sharing! 😊
@eli-barrrunforge5823
Жыл бұрын
Thanks for checking it out!
@rbsa1980
4 ай бұрын
i was looking for a budget propane forge, this video helped me lot. thank you for sharing detailed info
@BarrRunForge
4 ай бұрын
Our pleasure. God bless and thank you.
@adamwood2640
Жыл бұрын
Just bought this for a hobbyist knife maker. Great review thanks
@BarrRunForge
Жыл бұрын
Good news. We think it will serve well. Enjoy and thanks for watching.
@toddhatten354
Ай бұрын
Thank you for a very informative video.
@BarrRunForge
Ай бұрын
@@toddhatten354 our pleasure. God bless.
@24934637
6 ай бұрын
Just bought the 2 burner version of this. For the last few years I've been using a home made helium bottle forge, but wanted to upgrade to a 2 burner design. Probably would have been cheaper just to add another burner to mine, but this one seems more compact. Looking forward to giving it a go, once I've got the refractory cement applied.
@BarrRunForge
6 ай бұрын
Very nice! Enjoy and God bless
@The_Wanderer323
3 ай бұрын
Was exactly what i needed
@BarrRunForge
3 ай бұрын
That’s great! I hope this helped.
@BaldWolf
Жыл бұрын
I have the double burner version, it works very well out of the box. My only complaint is that it didn't come with a rigidizer for the wool layer to compact it, and the position of the burners would have been more efficient on the side, that way when it was on it would have created a whirlpool effect in the forge. That way you heat up your material faster.
@craigljardine
8 ай бұрын
I bought the 2 burner version of this. It didn't come with refractory but luckily I already had some
@maxmaldonado3966
2 ай бұрын
Yeah I was checking the comments because mine didn’t come with cement either
@Comm0ut
8 ай бұрын
Good assembly video. 90-degee brass fittings are readily available so there's no need to have the fuel gas hose stick straight up if that gets in the way of convenient placement.
@usucmehardutube
11 ай бұрын
I am new to black smithing and this is the first gas Forge I have ever bought. I am so glad I watched because I would have had no idea what rigidizing fluid was and would have just painted the cement on without it. Thanks for the knowledge.
@alonzoventura1744
7 ай бұрын
How did it hold up?
@TheGypsyandtheVanillaGorilla
Жыл бұрын
Nice may get one!!
@TonAkveld1956
14 күн бұрын
Thanks for this insightful video! One question: the choke is opened for the first hole?
@juanboyd2895
29 күн бұрын
excellent could i use this indoors in a apartment
@RyanBarnes
10 ай бұрын
A couple of notes, first you can take the wool out of this forge. Makes it a LOT easier to soak with the rigidizer. The slightly tough part is putting it back in, but wasnt too hard. The other kote, is Mr. Volcano provides instructions kn how to apply the stuff and the cement for their forges, given this is essentially a clone, the instructions are compatible.
@michaelwray4359
Жыл бұрын
Thank you so much sir
@SonoraSlinger
Жыл бұрын
I have the Mr. Volcano. This actually looks pretty sweet for a little single burner
@BarrRunForge
Жыл бұрын
Yes sir. We are quite impressed, so far. Thanks for watching!
@tedsdogwalking
11 ай бұрын
I just bought one today on the vevor site for $64.04 total price. I don't know how I go wrong for my first forge to get started.
@dragonstonegemironworkscra4740
Жыл бұрын
Well it seems to be a pretty good investment. 2 questions. 1st would it be advantageous to purchase say about 4 or 6 fire bricks to go with the forge? To seal up the front n rear openings as needed for heat and wind controls? 2nd, is there a concern or recommendation for removing the burner to prevent stove pipe effect and possibly damaging the burner and or the propane hose? God bless y'all now Crawford out 💯🙏🏻🔥⚒️🧙🏼♂️
@eli-barrrunforge5823
Жыл бұрын
Yes we have a couple fire bricks to close it up and contain the heat I didn’t notice any stovepiping but we haven’t ran it for a long duration yet. Maybe in an update video we will address those, thanks Crawford!
@RyanBarnes
10 ай бұрын
Oh!! A third comment. The red knob on the regulator has an open/closed setting. You need to have that turned correctly. Took me more than a minute to figure that out.
@axtro8001
20 күн бұрын
Can you forgeweld with this
@billiejohns6270
Жыл бұрын
What size stock do you think it can heat 2 inches hammer build
@eli-barrrunforge5823
Жыл бұрын
It does have a small chamber but I believe a 2 inch billet would fit fine
@Wolf0fTheNorth
Жыл бұрын
Subbed
@SeraphsWitness
5 ай бұрын
How long would a propane tank last on a forge like this? Forgive my ignorance, I'm trying to figure out the operational costs.
@ragingwerewolfdude3797
Жыл бұрын
just bought the two burner vevor, didnt come with rigidizer and im concerned
@BarrRunForge
Жыл бұрын
I recommend a rigidizer in the video from Mr Volcano since Vevor does not provide it.
@yoerim360
Жыл бұрын
@@BarrRunForge but how needed is it? and where to find it in europe? bought the three burner edition but installation instructions are poor and no liquid nor mention of the liquid and cement
@Louisthefur
Жыл бұрын
@@yoerim360I didn’t use rigidizer on mine… I think you just have to be a little more careful while inserting items and not bumping into not the sides too hard. It would likely chip off the cement if you aren’t careful.
@scottlloyd1938
10 ай бұрын
What size bag of refractory cement will be big enough to cover the forge please my friend?
@corwin81
2 ай бұрын
Sadly that forge doesn’t come with refractory cement anymore 😞
@DixielandTreasures
4 ай бұрын
The one from walmart doesn't come with the refactor cement. i bet they sell that on the side
@BarrRunForge
4 ай бұрын
It seems like they’re no longer including refractory in the kit from what I’ve heard.
@thegoldenatlas753
2 ай бұрын
@@BarrRunForge can confirm got it a couple months ago and no cement
@garypostell5268
Жыл бұрын
So basically after a week it usable!
@BarrRunForge
Жыл бұрын
It varies depending how fast the rigidizer and refractory take to set. Usually it’s better to be on the safe side just so everything cures fully.Thanks and God Bless!
@garypostell5268
Жыл бұрын
A little small!
@villain1409
8 ай бұрын
I bought the double burner of vevo,and it comes with a much tighter wo0l & no cement & no information on it. I must not need the cement? I do have cement fondu & was thinking of adding that,not sure yet.
@nato1405
Жыл бұрын
I've been looking at a cheap single burner for heat treat of knives under about 200mm. Would this suit? How even is the heating from the centre out?
@beaud3035
11 ай бұрын
Im curious to the best steel to use for beginners? Ive got some 1095 flat bars now but just bought this forge and new to this. Quenching oil?
@katyuuki2261
Жыл бұрын
How long would a 20lb cylinder last?
@BarrRunForge
Жыл бұрын
It should last hours. The issue would the tank icing up before you actually ran out of fuel
@p.c.windhamparanormalroman4339
7 ай бұрын
The only problem I had with this video is when you put on the thread tape. I whinced when I saw you wrapping it around the fitting the wrong direction.
@billygoat12
Жыл бұрын
i already bought this but dont wanna spend any more money on getting started blacksmithing, can i get by without the rigidizer?
@BarrRunForge
Жыл бұрын
I wouldn’t recommend it. The rigidizer helps the ceramic fiber from melting and the fumes can be toxic.
@rastamon5969
11 ай бұрын
Why would you even consider not using it? Its not expensive
@BarrRunForge
11 ай бұрын
@@rastamon5969 agreed.
@yogeshwar4395
2 ай бұрын
It's available in India 😢
@SchysCraftCo.
Жыл бұрын
Very nice job reviewing and testing it out Barr Run Boys. Can't wait to see more videos soon. Keep up the great craftsmanship and hard work my friends. Forge on. Fab on. Weld on. Keep forge lit. Keep making. God bless.
@eli-barrrunforge5823
Жыл бұрын
Thanks Jared!
@samiam1254
Жыл бұрын
Have a good day in the Forge, Troy and Eli!!
@eli-barrrunforge5823
Жыл бұрын
Thank you Sam!
@sysmith5436
5 ай бұрын
Excellent video, thank you.
@BarrRunForge
5 ай бұрын
Our pleasure.
@sgtkururu5
Жыл бұрын
just coated mine with the cement last night, not sure if i got the cement mixture right or not :o how much water did you add when you mixed your cement?
@BarrRunForge
Жыл бұрын
Just based it off of the consistency of the mixture. You want it to be like runny peanut butter
@sgtkururu5
Жыл бұрын
@@BarrRunForge sweet, I ended up just going for it and that's about what I had! Not sure if I got it coated perfectly, but I can get more refractory cement at Menards if I need it
@Errmmmmwhatthesigma
5 ай бұрын
I got it and it didn't come with any cement what do I do
Пікірлер: 77