Looks great and workss very well (as far as I could see it from onboard)
@EvolVillainRC
Жыл бұрын
Check some of my photos from the comp this weekend! driftitch.com/2023/05/21/slideworx-rc-spring-2023-matsuri/
@SeanLewisMedia
Жыл бұрын
Looking good! The red looks awesome and your absolutely correct about it being one of the best options for an upgrade to the yd2 platform. The price and super competitive setup you get is insane. Its a little tought to build and tune but is dialed once its there and is what all the pros are running for a reason!
@MRJZA75_34
5 ай бұрын
Slideworx in bonner springs? that's my local track! nice!
@KCmotovlogger
Жыл бұрын
Drooled on my keyboard, that thing is sick!
@EvolVillainRC
Жыл бұрын
I know man, my jaw hit the floor the first time I saw Daltons with the body off....
@xxrfmxx
Жыл бұрын
nice job car looks great
@richardr.waithe1301
Жыл бұрын
how did you mount the ESC? is there a plate or did you mount it directly to the gear box with double sided tape or something? That red looks awesome btw.
@EvolVillainRC
Жыл бұрын
Yep 2 strips of servo tape. I moved it to the top plate though.
@richardr.waithe1301
Жыл бұрын
@@EvolVillainRC thanks, another question, I am actually finishing this conversion from a yd2 RTR. I notice the rear turnbuckle connected to the shock tower is much longer than usual, can you tell me what ball stud you are using there? I also had to change my rear shocks from the backside of the shock tower to the front of the shock tower.
@EvolVillainRC
Жыл бұрын
@@richardr.waithe1301 Its a 10mm threaded stand off with the ball stud threaded in on one side and a 12mm m3 button head on the backside of the tower. I bought a set of 10 on ebay for 8 dollars. You can run the shocks on the back of the tower using the same trick, 1 20mm theaded stand off or 2 10mm spacers.
@bacon9896
Жыл бұрын
Your shark drifts so well, do you mind sharing your rear & Acuvance setup? I've perfected my front but my rear is so inconsistent, any help would be greatly appreciated!
@EvolVillainRC
Жыл бұрын
I think im pretty well stock with the RAD, 5 degrees of boost and 22 degrees of turbo (36 deg physical on the Fledge) . Thats what a few of the guys are running at our track for a conservative setup. As for rear end, it's a work in progress. I switched to 6 hole 1.2 mil pistons and 100wt oil at all 4 corners. MST medium rear springs on Yokomo bigbores. I try to keep a pretty major rearward rake to transfer as much weight to the rear. I still have more work to do, but its leaps and bounds better than it was.
@bacon9896
Жыл бұрын
@@EvolVillainRC Awesome brother, thank you so much! I noticed you have the camber on squat setup for the rear, how much static camber do you recommend? Also, what gearing or FDR did you settle on?
@EvolVillainRC
8 ай бұрын
@@bacon9896 I actually dont have a recommendation here because this car is a work in progress. I zero out on the bench and go from there. It looks like under throttle is more like -1 deg based on the wear strip on the tire. I need to probably test some more here, but the car has been so good I just haven't messed with it.
@GunturWibowo2010
Жыл бұрын
wait, its really fast
@Quintanater
10 ай бұрын
This works with yd2 Rx??
@EvolVillainRC
10 ай бұрын
I think so, it ony sources suspension and I think those are the same between RX and SX
Пікірлер: 18