Ben ritrovati!
Questa volta siamo ospiti presso un azienda del tutto nuova, mai vista prima d'ora sul mio canale, ovvero l'azienda agricola Maranella, che si occupa della produzione di latte alta qualità attraverso un allevamento di 150 capi di frisone.
Azienda situata presso località Caprafico di Forcella (TE).
Ma la stalla comunque la andremo più avanti, prossimamente in altri video.
Adesso occupiamoci della descrizione di questa accoppiata, totalmente nuova, mai vista sul canale prima d'ora!
Si tratta di un New Holland T6050 Plus, prodotto nel 2007 a Basildon, UK, successore della serie TM che fu appunto rimpiazzata dalla serie T6000, che presentava un design completamente nuovo, con cofano e cabina completa ridisegnati!
Ma ci fu un cambiamento anche bella parte meccanica, con l'abolizione del vecchio motore Ford Genesis 7500, e il subentro del nuovo motore FPT NEF 6700 cc, un propulsore 6 cilindri con iniezione Common-Rail che eroga una potenza massima di 136 cv.
Per quanto riguarda invece la trasmissione, in questo caso stiamo parlando di una trasmissione DualCommand con 16 marce totali avanti e indietro.
Le falciatrici in questo sono 2 KUHN come avete modo di vedere, la frontale è una Kuhn GMD 802F con 8 dischi di taglio ed una larghezza lavoro di 3,11 metri.
La posteriore invece è una Kuhn GMD 240, con 6 dischi di taglio ed una larghezza di taglio di 2,40 metri.
Questa falciatura riguarda ancora il primo taglio, che concluderemo appunto con questa ultima serie di fienagione fino alla pressatura, totalmente nell'azienda Maranella, così come lo è stato per l'azienda colucci, dove avete visto tutte e 4 le fasi dalla falciatura alla pressatura.
Io concludo qui la descrizione salutando il mio amico Donato, driver e proprietario del mezzo.
Nel frattempo, ci vediamo già domani sera, col video del voltafieno, con un altro mezzo molto serio 😉😉😉
Buona visione!!!
(ENG):
Welcome back!
This time we are guests at a completely new company, never seen before on my channel, the Maranella farm, which deals with the production of high quality milk through a herd of 150 Friesian heads.
Company located in Caprafico di Forcella (TE).
But the stable, however, we will go further, soon in other videos.
Now let's deal with the description of this combination, totally new, never seen on the channel before!
It is a New Holland T6050, produced in 2007 in Basildon, UK, successor to the TM series which was replaced by the T6000 series, which featured a completely new design, with a redesigned hood and complete cabin!
But there was also a nice change in the mechanical part, with the abolition of the old Ford Genesis 7500 engine, and the takeover of the new FPT NEF 6700 cc engine, a 6-cylinder engine with Common-Rail injection that delivers a maximum power of 136 hp.
As for the transmission, in this case we are talking about a PowerCommand transmission with 18 forward and 6 reverse gears.
The mowers in this are 2 KUHN as you can see, the front is a Kuhn GMD 802F with 8 cutting discs and a working width of 3.11 meters.
The rear, on the other hand, is a Kuhn GMD 240, with 6 cutting discs and a cutting width of 2.40 meters.
This mowing still concerns the first cut, which we will conclude with this last series of haymaking up to pressing, totally in the Maranella company, as it was for the Colucci company, where you have seen all 4 phases from mowing to pressing. .
I conclude the description here by greeting my friend Donato, driver and owner of the vehicle.
In the meantime, see you already tomorrow evening, with the video of the tedder, with another very serious vehicle 😉😉😉
Good vision!!!
Негізгі бет NEW HOLLAND T6050 + KUHN GMD 802 F + KUHN GMD 240 | MOWING GRASS | MARANELLA
Пікірлер: 30