I am liking Record every day more. I will start saving for a new lathe soon
@Anry_V
Жыл бұрын
Who will remember the camera angle when a man has a new toy! Congratulations on your purchase!
@tomislavtomasicwoodturning
Жыл бұрын
Thank you very much 🤗
@patrickgibbons9179
Жыл бұрын
I bought the Coronet Envoy two years ago. They’re wonderful machines. You’ll never regret the purchase.
@tomislavtomasicwoodturning
Жыл бұрын
So far Its great, but I need to put it through my pace to see ...so review will be in 6months or so....
@mikulasbim2658
Жыл бұрын
You Are my favorite Woodturning Channel So im glad you get new lathe contrugralions and good luck
@tomislavtomasicwoodturning
Жыл бұрын
Thank you for that 🤗
@bobingowen5368
9 ай бұрын
Thank you for your videos. Seeing you unpack and assemble the Envoy helped finalize my decision to purchase a Record Power Coronet Envoy. Thank you. My lathe arrived early this week and I am very happy with the lathe.
@tomislavtomasicwoodturning
9 ай бұрын
Glad to hear that, I had Regent accually and both are good lathes🤗enjoy your new lathe
@leftymcshea6876
Жыл бұрын
Congratulations and hoping you have many years of good times together! It's very nice!! Don't forget to buy some flowers to put in that newly turned vase for Mrs. Tomislav! 😉
@tomislavtomasicwoodturning
Жыл бұрын
Thank you, indeed I do need some flowers for the Mrs☺️ .... She deserve it🥰
@MikePeaceWoodturning
Жыл бұрын
Congratulations on your new lathe!. I know you will love it's increased weight and capacity.
@tomislavtomasicwoodturning
Жыл бұрын
I sure do😀 thank you sir
@Pipejawood-Woodturning
Жыл бұрын
You're so excited about your new lathe that you forget about your camera. Congratulations. May it serve you for many years. Keep it spinning 😃😃😊😊😊
@tomislavtomasicwoodturning
Жыл бұрын
Indeed, I totally was in the moment.... Thank you 😀
@henniebasson515
Жыл бұрын
I think you should have kept your old lathe - I kept mine and so often find that both of them are in use the same time (not same moment!). Enjoy your new one. I am a bit jealous. Kind regards.
@tomislavtomasicwoodturning
Жыл бұрын
Thank you very much, budget was tight so unfourtually it needed to go.... I do like the principles of two lathes....
@JamesCouch777
Жыл бұрын
That lathe is a beast. I've got an old antique Crescent lathe, very heavy, and I upgraded the motor to a treadmill motor and it works great. I enjoy making a lot of wood chips 😄
@tomislavtomasicwoodturning
Жыл бұрын
Indeed its a great lathe, maybe soon there will be another one😉
@abrodeck
Жыл бұрын
Hi Tomislav, I've been watching your videos for a while now and I noticed that you changed your lathe at some point. Coincidentally, your old lathe is the same one I bought a month ago to start turning. I'm glad to see what wonderful things you've created with the DML 320. It confirms that I didn't do anything wrong when I bought the lathe. Now I have finally found the video in which you introduce your new lathe. I can imagine that you were very happy. I was able to learn a lot from your videos. Especially your beginner videos were very informative. I look forward to many new videos from you and wish you a lot of fun with your new lathe. Stay healthy. Many greetings from Andreas from Germany, who is currently on holiday in Pula. We love Croatia
@tomislavtomasicwoodturning
Жыл бұрын
Hello Andreas, glad to hear that you are in Pula, have a great holiday🤗... Thank you very much for kind words and time you took to watch my videos. Dml320 is a great lathe, I made a lot if things on it, works like charm.... My new lathe will be old as hopefully its leaving, its s great lathe and I'll do review in few days. I have another lathe coming which will be quite interesting.... Size of dml320😉...more soon... You did great purchase and you'll enjoy turning on it. Once again thank you and greetings from Zagreb
@abrodeck
Жыл бұрын
@@tomislavtomasicwoodturning Hi Tomislav, thanks for your quick reply (must have been in the middle of the night 😴). Your confirmation of my purchase decision means more to me than the seller's descriptions. I have one more question. What kind of wax is it that you often use right after applying the linseed oil? I mean that brown "lump" that you always use. Thank you very much for your answer. I am not sure, wat you mean by "My new lathe will be old as hopefully its leaving" but i will stay tuned 👍. We are enjoying our holiday here as much as ever. We have been caravanning regularly in Croatia for 20 years now. Unfortunately we have to return home on Thursday. I drink a beer with your name on it to your health 🍻. Greetings Andreas
@tomislavtomasicwoodturning
Жыл бұрын
@@abrodeck cheers Andreas in my name, I hope this week to reveal what I mean by that😉.... I use pure beeswax by its old lump so its brown🤗.... Thank you very much and keep an eye on next few videos as they will be interesting I hope... Don't worry , your lathe is great and great decision.... Will last you a long time....
@abrodeck
Жыл бұрын
@@tomislavtomasicwoodturning Thanks again Tomislav, see you in your next videos for sure.
@chickenguru4
Жыл бұрын
That’s wonderful. Your old one was pretty impressive and I’m sure your new one you can’t get much happier. I’m personally looking at the herald. Can’t wait to see more videos
@tomislavtomasicwoodturning
Жыл бұрын
Thank you, I'm really happy.... Herald is a great lathe as well.... I think in that price range there are leders.....wish all the luck in buying a herald☺️
@benjaminbismuth8326
6 ай бұрын
Bravo pour la démo Peut-on évider comme vous l’avez fait à main levée avec un coupoir ça permet de gâcher loin de bois et d’en faire autre chose Cordialement Et encore merci
@mikek47
Жыл бұрын
Great looking setup. Thanks for sharing.
@tomislavtomasicwoodturning
Жыл бұрын
Thank you, glad you liked it ☺️
@rankoradosavljevic4641
Жыл бұрын
Odlican strug. Neka ti sluzi za uzivanje. Cestitam na izboru!
@tomislavtomasicwoodturning
Жыл бұрын
Hvala Vam puno Ranko☺️
@buckdunn9980
Жыл бұрын
This lathe seems to much quieter than the other you had .I think you will really enjoy this new lathe , I look forward to seeing you and it in action soon thanks for the hard work
@tomislavtomasicwoodturning
Жыл бұрын
Its really quiet, even with big bowl blank.... So far I liked it ☺️ thank you for watching 🤗
@MikeHolton
Жыл бұрын
Congratulations on your amazing lathe, I love mine and I'm sure you will love it. It's a heavy beast, I nearly put my back out putting it all together :D
@tomislavtomasicwoodturning
Жыл бұрын
It is heavy, but as I did with my old one I bolted it to concrete.... Now the vibration are even less..... Glad you like yours and should be fun between us two to see its capabilities....🤗
@MikeHolton
Жыл бұрын
@@tomislavtomasicwoodturning indeed! Although I bout the additional outboard attachment that can turn up to 1m, that may be a bit scary though lol
@tomislavtomasicwoodturning
Жыл бұрын
@@MikeHolton that would be great video.... 950mm dia bowl or platter😎
@MikeHolton
Жыл бұрын
@@tomislavtomasicwoodturning I'm thinking platter or table top
@tomislavtomasicwoodturning
Жыл бұрын
@@MikeHolton hmmm table using just a lathe👍 that would be fun to watch
@baconsoda
Жыл бұрын
Lovely, health to enjoy. Best Wishes, Brendan.
@tomislavtomasicwoodturning
Жыл бұрын
Thank you Brendan 😀
@burnleyize
Жыл бұрын
Man, I am so happy for you! There is nothing like getting a new lathe! Liked your coring system: what brand is it? My very best wishes for a lifetime of enjoyment with wood and SAFETY as you do it.
@tomislavtomasicwoodturning
Жыл бұрын
Thank you soo much 🤗 Its McNaughton system,I bought it used and provius owner bend the knifes, so I do need a new set, and now I have excuse for bigger size of knifes😂
@ivanbukh7576
Жыл бұрын
С обновкой!!!
@daviddickmeyer5231
9 ай бұрын
Nice lathe! You sure have a nice touch using it.
@tomislavtomasicwoodturning
9 ай бұрын
Thank you sir
@Winterbourne_wood_turning
Жыл бұрын
Enjoy the lathe, I have one and loveit
@tomislavtomasicwoodturning
Жыл бұрын
Thank you ☺️
@lutheduck
Жыл бұрын
Zdravo da ga koristis i boljim da ga zamijenis jednoga dana 👏👏
@tomislavtomasicwoodturning
Жыл бұрын
Hvala 👍
@WollesWoodArt
Жыл бұрын
Hello Tomislav, I currently also have the RP DML 320 and am about to buy the CORONET REGENT FROM RECORD POWER. Can you recommend the machine so far? Thank you for your statement.
@tomislavtomasicwoodturning
Жыл бұрын
Hello, thank you for watching, I will do a review after I spend more time on it, .... There are few things that I dont like, mostly are fit and finish and how I feel erginomicly at it.... But I do this 6-7hours a day so some stuff bothers me that hobby turner might not even see.... That being said for the money I did not find better machine.... 2hp motor and the size , it does not have competition in that price range, and there are quite a lot of sales on it so you can save even more money..... If you are on butget go for it....👍
@WollesWoodArt
Жыл бұрын
@@tomislavtomasicwoodturning - Dear Tomislav, the RP DML 320 is simply too light for larger bowls. I also had to modify it technically in several places to make it more stable. As a construction expert, I then immediately exchanged the slotted screw of the quill for harder steel. The locking screw on the handwheel on the right also always slips. here a notch had to be ground into the quill. To change the V-belt, the screws had to be constantly loosened with an Allen key on the small front door at the bottom and the plastic cover at the top. I also changed that with a handle to open it. The cheap locking screw on the spindle hand wheel always came loose and was changed. My concern is whether your new CORONET REGENT machine has not shown any serious errors to date. Thank you in advance and I keep checking the way you work. It's fun to watch and I wish you continued success.
@tomislavtomasicwoodturning
Жыл бұрын
@@WollesWoodArt thank you very for wishes, to you as well as your family wish all the best..... Regent I have for couple of months now and no error yet, and I do put it through its paces, there is a big differents in dml and regent, I think you will be happy with regent,but if you have the butget don't over look some other brands that are a bit more money but there fit and finish is slithly better..... I got a good deal and liked my dml320 so I went with regent.... So far so good but bear in mind I have it for 2months so proper test will be in winter where another 500 to 1000 rough out bowls will be made.....
@noelgreen9381
Жыл бұрын
Looks great, congratulations. I also have the bed extension and the outboard turning attachment. Did you get new chucks, or change the adapter to accommodate the larger headstock thread?
@tomislavtomasicwoodturning
Жыл бұрын
I did get a sc4 , old lathe was also m33x3,5 thread so no adapters needed🤗 , I was looking for bed extention but budget was tight so in a few months..... You also have regent?
@noelgreen5863
Жыл бұрын
@@tomislavtomasicwoodturning yes I have same one as you, but my old Rikon was 1x8 drive while Regent is 1 1/4 x8, so I had to get a new chuck and some adapters.
@tomislavtomasicwoodturning
Жыл бұрын
@@noelgreen5863 aaaa that is extra cost , most of us dont think about that
@emgiwoodworks
Жыл бұрын
Long overdue indeed.
@tomislavtomasicwoodturning
Жыл бұрын
Agree 👍
@MPLMWorkshop
Жыл бұрын
Izgleda moćno. Evo prekinuo video od Direste, kad stigla notifikacija tvojeg videa :D
@tomislavtomasicwoodturning
Жыл бұрын
Jooj pa nisi trebal😀 diresta je zakon... Hvala ti
@MPLMWorkshop
Жыл бұрын
@@tomislavtomasicwoodturning A ne, Diresta legenda. Al ipak domaće je domaće :D
@tomislavtomasicwoodturning
Жыл бұрын
@@MPLMWorkshop hahahah dobra dobra😂 Hvala ti ko i obicno kolega
@kimpiispanen5677
Жыл бұрын
Looks nice! Been thinking about buying the same lathe. What is your opinion on the lathe so far?
@tomislavtomasicwoodturning
Жыл бұрын
Thank you for watching, its a good lathe in that price range, I dont think there is a more powerfull one in that price range.... If you are on butget go for it.... If you can add a bit more you get better fit and finish with other brands ...if that is what interest you .... I will do in few months review on it ...
@thanosmargon9575
9 ай бұрын
The only downside to this lathe is that it starts at 250 rpm
@tomislavtomasicwoodturning
9 ай бұрын
Indeed, it not infinite adjustable like some other models
@mbahsir
Жыл бұрын
very nice wood lathe friend, how much is it
@tomislavtomasicwoodturning
Жыл бұрын
Thank you, visit record power website for the latest prices
Пікірлер: 71