Has anybody had problems with the coppers? I was told by dmv I can register it as a road legal scooter. Will update you on that. Would be nice to legaly drive on road at traffic speeds.
@blueforceerides
Жыл бұрын
All depends on where you live. Every place is a little different with the rules.
@juangonzalez-gv7yo
Жыл бұрын
Thank you so much, ive been wanting to change it from km/h to mph for a while now. Your the best man
@DiscBelief
9 ай бұрын
Just got my new D6+2.0 and the 2nd time I go to ride the power won't come on. It flashes on while holding the button but goes back off. Please tell me that's just a loose connection somewhere. I'm kinda new to these.
@bxnycrampage
Жыл бұрын
I notice nanrobot advertise there model scooter D6+2.0 with a UL. What UL means?
@macsconi
2 жыл бұрын
I think I just ordered the last D6+ 2.0 disk brakes on the website. 😁 can’t wait to receive this scooter.
@blueforceerides
2 жыл бұрын
You did actually, thank you! We will have new stock very soon. You are going to have a blast!
@hozayismusic1
6 ай бұрын
Do I have to set it back to mph everytime I turn it back on ?
@RobFlibbs
8 ай бұрын
My odometer randomly reset today anyone else have this glitch
@EPICBLASIAN1
2 жыл бұрын
WOW! THANKS A MILLION! SUCH A FAST TURN AROUND TOO ON THE VIDEO....😜 I was wondering about that MPH thingy and waiting for you to address it and you did. Which really helped out a lot. Now I feel at ease about that. Only question I have left for the LCD is when you battery reaches low, does it notify you? I'm just waiting to hear anything about the Yume M10 electric scooter. If it sucks then I will order two Nanrobots D6+ with steering dampers off your website and when I get them, I'll do an opening and assemble video on my channel and PUT YOUR LINK in there and mention you. 👍
@blueforceerides
2 жыл бұрын
Absolutely!! The battery bars will go down towards red as you drain it but I'm not sure if it will give you more of a notification than that. The Volt meter on the handlebar is really what will tell you, more accurately, what your battery is at. I appreciate it, if you choose to get the D6, I don't think you will be disappointed. The M10 is a brand new scooter this year so I haven't been able to get my hands on one to test it. As far as Brand goes, from dealing with both Yume and Nanrobot, Nanrobot has been much better. Hopefully this helps with your next ride!
@EPICBLASIAN1
2 жыл бұрын
@@blueforceerides Thanks! 😃 Yeah the customer support at Yume is quick but they don't seem to understand basic English over there very well, and this is coming from someone married to a Chinese wife for 12 years next month... LOL. I'm leaning more towards the Nanrobot D6+ now too. I think my wife likes it better. 😀
@blueforceerides
2 жыл бұрын
@@EPICBLASIAN1 Yes sir, sometimes it is tough to get a message across. lol Not sure if you plan to do any off roading but the D6 comes with hybrid tires and has a great deck height. The hybrids give the best of both worlds, and the deck height gives extra clearance. I didn't mention those two points in my video so I wanted to let you know.
@RJ-ue3ub
2 жыл бұрын
@@blueforceerides Hey! i have a question about the LCD screen. How scratch resistant is it? Would you recommend a screen protector for it?
@blueforceerides
2 жыл бұрын
@@RJ-ue3ub The plastic seems pretty durable. I don't believe it needs a protector.
@ivanbilandzic6571
6 ай бұрын
A setinga reset when scooter is turned off then on?Wtf
@stavcho
2 жыл бұрын
hey Blue Force , any idea how we can see how much is the total mileage on the display ? I can only switch between current speed and "trip mileage" thanks
@piotrskowron8488
7 ай бұрын
I have the same problem on my Nanrobot D6+ 2.0. Only trip km no info about total km.
@pacochawa2746
Жыл бұрын
Ok I got mine and this is heads up for anybody who got d6+2.0 60v. If you order fast charger the d6+2.0 charger does not fit. The reg d6+2.0 is 52v and the 60v battery model actually uses LS7+ charger. I ordered the darn thing and 2x they sent me the 52v charger big headache. Hope they get me the right one the 3rd time...LS&+ has a larger plug with no yellow in it.
@Carcajoo121
Жыл бұрын
I’m looking to install that new display onto my old 1st generation D6…I’m wondering if I can simply buy the display unit and plug it to my existing wires ?
@grazz7865
2 жыл бұрын
Nice improvements with that dash panel! Did that affect the price of the scooter at all?
@blueforceerides
2 жыл бұрын
Nope
@christianbotnan8453
2 жыл бұрын
Hello can you help me? I have accedentlig move on setting p3 speed sensor. I have a nanrobot D6 +. Now it not show speed or move. Need help
@pacochawa2746
Жыл бұрын
Nice info. Cant wait to try it out lol. Waiting for delivery is such a drag.
@blueforceerides
Жыл бұрын
You're going to have a blast! Should have grabbed one from my site. Fast and Free shipping right to ya. lol
@pacochawa2746
Жыл бұрын
@@blueforceerides I would have but amazon was only one who gave me credit lol. Will check out your site for sure next time or when I need parts.😉
@jamesmabugu7899
Жыл бұрын
Looking to buy a scooter I can grow with, is the d6+ 2.0 recommended for a total beginner? (Never been on a scooter before)
@blueforceerides
Жыл бұрын
Yes, it is totally manageable to ride. You can start on gear 1 to get comfortable at first.
@shakamaos80
2 жыл бұрын
I think that's a d settings or the p is upside-down.
@allennichols8850
Жыл бұрын
Thank you so much I have a question
@theirs9032
2 жыл бұрын
i have a problem where my p settings reset when i turn the scooter off and back on again. Any way to fix this?
@blueforceerides
2 жыл бұрын
No, not at this time.
@benhurapilado3767
2 жыл бұрын
I COMPARE THE BLADE 10 GT PLUS
@ThePunisherGW
Жыл бұрын
Thanks for you help 🎉
@derrickhead474
2 жыл бұрын
Can this display be used on any other scooter models such as the dualtrons?
@BlueForceSabers
2 жыл бұрын
No, it's made for Nanrobot scooters.
@sireuc
2 жыл бұрын
Does your Odometer and P settings reset each time you turn off the scooter
Merci pour cette vidéo 👍. La trott est t elle débridé d'origine ?. Merci.
@YANT20
Жыл бұрын
OUI.
@Francoiskiki
Жыл бұрын
@@YANT20 bonjour, l écran LCD de la trott affiche le nombre de Kilomètres parcours, mais quand t on l arrête puis la redémarre le compteur et a zéro !!! C est normal ? Merci l amis.
@YANT20
Жыл бұрын
@@Francoiskiki Oui, elle rebascule sur la vitesse en km/h. Pour faire défiler les autres informations du display comme la distance totale ou partielle, il faut double-cliquer sur le bouton M une fois la trotinette allumée. Pour la lecture, il ne faut pas s'embêter avec l'unité derrière les chiffres, qui restera toujours en km/h, même si il s'agit de distance.
@Francoiskiki
Жыл бұрын
Merci.pour moi la distance totale se remet à zéro a chaque fois que l'on rallume la trot !.
@YANT20
Жыл бұрын
@@Francoiskiki Es-tu sûr que c'est la distance totale qui se remet à zéro et non pas simplement que tu es sur l'affichage des km/h ? Si tu fais défiler les autres infos de l'écran en double-cliquant sur M, qu'obtiens-tu ?
Пікірлер: 63