Problem solved. Pay more to get less AND THEN buy even more to connect it. Seems to be bullshit? Yes it is
@tt-rs1457
3 жыл бұрын
By all means. What is wrong with lego. You have to dispense with logic, when buying Lego stuff
@MrLPRubi
3 жыл бұрын
Don't try it. Fanboys will always find a way.
@Scotzie69
3 жыл бұрын
@@MrLPRubi they will give all their money they have to Lego instead of buying by alternative and cheaper companys
@hasanyilmaz77
3 жыл бұрын
Yes you say sure
@ric01232001
3 жыл бұрын
this does seem like it works, but thats going to be hell of an expensive setup for any kind of sizeable city
@BricknIt
3 жыл бұрын
YES! Extremely expensive!
@SharpeysWorld
3 жыл бұрын
totally agree
@ronik24
3 жыл бұрын
Exactly my thought as well... and so many nice plates never to be seen again....
@pieku
3 жыл бұрын
If I was starting from scratch, it would be expensive, but currently the BULK of my collection is an overabundance of plate. It will be nice to actually have something to do with it, instead of having to spend money on containers to store it all.
@ThunderDK74
3 жыл бұрын
Not as expensive as the 5 plate high modular MOC road system (forgot the name, sorry)
@willbricksproductions
3 жыл бұрын
Has everyone forgotten is that there is no curves coming out
@LibertyPrime1982
3 жыл бұрын
(Citation needed)
@timquestionmark
3 жыл бұрын
I was under rhe assumption they's probably add curves and maybe things like roundabouts later on when they know the system is successful. Otherwise it's not like modular buildings have round curves anyway
@TheFeanor74
3 жыл бұрын
@@timquestionmark Well, good luck hoping than LEGO will bring them out any time soon. It would...let's say "surprise" me.
@BinkBricks
3 жыл бұрын
There will be curves, one day
@schabe6419
3 жыл бұрын
@@BinkBricks Took a hammer and their will be curves soon. :D
@oh-totoro
3 жыл бұрын
"it's that simple" LOL!!!
@BricknIt
3 жыл бұрын
Hahaha, it also took me about 12 hours to figure it all out!
@rud1gga155
3 жыл бұрын
Ez af
@samukai-nw8te
3 жыл бұрын
@@BricknIt thanks for the video man
@schabe6419
3 жыл бұрын
@@BricknIt Really? This is no joke? You need 12 hours to find the solution of buying another baseplate and build it two studs higher? You mean 12 seconds. You mean seconds? ^^ This was the first problem I'm thinking about and you say the problem is your solution? WTF! Here is my solution: Buy the old ones from alternative companies and if you need stackable street plates they're also existing: www.amazon.de/Strictly-Briks-Bauplatten-Kompatibel-F%C3%BChrenden/dp/B07C9YQZTF
@kevinlee9444
3 жыл бұрын
Cheapest solution: just get a black table top and add white stickers for lane markings.
@brickguy0486
3 жыл бұрын
I used to do that. If it's done right, it looks very real
@the911collection
3 жыл бұрын
Or dark grey
@larslayerlol
3 жыл бұрын
I built my own table and painted it in the same dark grey as Lego roadplates. Then I bought white stickerpapers and cut out road markings. That way I can rearrange the road markings as I please.
@StudCity
3 жыл бұрын
love it
@joemann7353
3 жыл бұрын
True or just print it out on paper and cellotape it to the shelf lol
@LarissaSchiefer
3 жыл бұрын
The new roads are too small for certain trucks to pass each other without touching.
@xhearthfirex6571
3 жыл бұрын
And don’t get me started with new 8 stud wide size of the fing Speed Champions !
@zwitshr
3 жыл бұрын
Da hat jemand den Helden geschaut
@wruzzer
3 жыл бұрын
@@zwitshr Oder einfach selbst gemerkt, wie dumm das neue System ist..
@taqresu5865
3 жыл бұрын
Actually, you can combine the modular pieces to make make bigger lanes, just use regular dark grey 2×4 plates in the middle and use the printed plates to connect the 16×16 road plates. Now you have traffic lanes that are 16 studs wide, which can easily fit the widest Speed Champion builds.
@wruzzer
3 жыл бұрын
@@taqresu5865 how much u wanna pay for this?! i mean, sure, if money is not an issue, go for it.
@hamilton3901
3 жыл бұрын
So I need a weird workaround in order to make lego compatible with lego? No thanks, this company is trying to scam it's customers. These plates are completely outside the Lego system
@beawatton
3 жыл бұрын
The new roads aren't outside the LEGO system, the modulars are because they're sat on baseplates, which are half the thickness of a plate; that's incredibly annoying when the system is based on a full plate of thickness. This is why they're phasing out baseplates. These roads are also modular which the old ones weren't.
@hapepunktpunktpunkt8196
3 жыл бұрын
Simple solution: don't ever buy one of the new city street sets. Don't...!
@infinitify2591
3 жыл бұрын
That’s your opinion dumbass
@F_l_x
3 жыл бұрын
So we ignore the fact, that some of the old truck/Cars dont fit on the New street And that the effektive plate surface you get ist 4 times more Expensive in comparison to the old street?
@Etienne.6329
3 жыл бұрын
Yes.
@dj_langraph
3 жыл бұрын
Da hat einer Held der Steine geguckt xD
@taqresu5865
3 жыл бұрын
You can make the lanes wider, even 16 stud wide lanes if you want.
@taqresu5865
3 жыл бұрын
4 times more expensive? It's $16 just to buy 2 road baseplates at my retail stores (makingthem $8 each), versus the $20 for the new Road Plate set, with half of the value being divided into 4 new road plates (making them $2.50 each).
@F_l_x
3 жыл бұрын
@@taqresu5865 Take a look at the Held der Steine Video, eventho it's German the makes a direct size comparison. For the German market the old Streets were listed around 10€ new, the new streets cost about 20€. But with the new streets you can't even cover the Playing surface of 1 Street baseplate. And in the old Street set you get 2 base plates, so for pure playing area the new one ist 4 times more expensive since in the old setup even more playable area cots just 5€. Material whise + production cost it's more like 3€ for the old set and 4€ for the new since there are more parts. In the dimensions of Lego's production their parts are not that expensive at all. The rest ist just the price tag of the company name. Oh and did I mention that you could also directly build on the 4 times cheaper old build plates? The new ones are just street, there you need even more overpriced parts to get buildings going.
@lightningspeedextreme2913
3 жыл бұрын
I actualy have a better sulucion: You just don't buy them
@toolstime5136
3 жыл бұрын
Or even put toilet paper under the plate 😁
@lightningspeedextreme2913
3 жыл бұрын
@@toolstime5136 hahahahaha
@projectpitchfork860
3 жыл бұрын
That's a really good solution.
@lightningspeedextreme2913
3 жыл бұрын
@@projectpitchfork860 you get it!
@schorsch-is6kv
3 жыл бұрын
@@toolstime5136 used one please ....
@dazblue5515
3 жыл бұрын
Sorry, but you shouldn't have to 'solve' the new road plate system... that suggests it's broken to begin with... which for me personally it is... I really don't like them! Hopefully we will still be able to pick up the proper road baseplates
@BricknIt
3 жыл бұрын
Couldn't agree more. The fact that the new roads wouldnt play nice with my existing modulars was keeping me up at night lol. Thats why i tried to figure out a solution to help out :)
@RCmies
3 жыл бұрын
I don't think they're broken. What's broken is official Lego baseplates that are a weird size (thickness of the top of a plate). I think it's good they're trying to go away from that system and make it more customizable etc. However they should also just make 16x32 road plates without sidewalks. I also think though that these roads are way too narrow. 7.5 studs per lane if you don't include the lane divider which I feel was already a problem with the current road plates. Well I'm just glad they're trying new things and I hope they keep the old ones still around
@dazblue5515
3 жыл бұрын
@@RCmies It's all personal on what you prefer or not, but totally disagree that baseplates are a problem or a weird size - the clue is in their name 'base' plates - designed to be the base you build upon, which for the road system makes perfect sense, as the lowest part of any town is generally the road surface, then a step up to the pavement (sidewalk) etc... this new system actually puts the road a whole plate (not baseplate) above modular bases... which will make raising a city to match, a very expensive procedure! The only constraint is that you have to have a two lane road - but really, how many people out there have a Lego city that's big enough for a multi-lane highway?
@pewpewdragon4483
3 жыл бұрын
Wonder why they didn't make the new roads 1 tile + baseplate height, I imagine that would work just as well
@Elmalab
3 жыл бұрын
even if the new streets would fit in hight, they still look ulgy as F with all those gaps.
@Knigh7391
3 жыл бұрын
That's a great mod... but that's an expensive solution specially having so much modulars.
@ComPoti
3 жыл бұрын
Problem solved: Just don't buy this crap. If Lego doesn't make enough money, they'll quickly fly out of the catalog and the old streets will come back. That's so easy ;-)
@rainybeet
3 жыл бұрын
The problem is not that the new road plates are outside the system, they are actually designed according to the "system." What is outside the system are the flimsy baseplates that don't work with Lego geometry. They need to start doing full plate baseplates so that you can not only connect them to other Lego pieces without first adding more baseplates, but so you can vary the elevation of modulars and anything else on a baseplate, whether for variety or to run wiring, or just to get everything to line up like Lego is supposed to. I just buy aftermarket full plate baseplates since you don't see them anyways, they are a fraction of the cost, and they actually work with the system.
@gregoreder8205
3 жыл бұрын
So you need to buy a building, than buy enough plates to build it not on the groundplate but on some new plates and then you could connect it to a road wich is to small for most lego-cars. And got no room for a sidewalk or other things ... and is double the price of normal road-plates. Well ... could someone tell me the reason behind it ?
@Mainswitch55
3 жыл бұрын
Lego doesn´t give much about customers I guess... They sell 98% overpriced crap today... unfortunately
@TRLAuthor
3 жыл бұрын
Only downside I see to this is that it requires a LOT of additional bricks/plates just to get your modulars to the same height as the new roads. That's going to get expensive fast, especially if you don't have a lot of spare plates already.
@BricknIt
3 жыл бұрын
Yeah completely agree! The new road plates seem to be a lot more expensive as well!
@DerAlex86
3 жыл бұрын
Why do you think LEGO introduced the new system? Because they want you to buy tons of plates from their PaB. However, you don't have to follow through with the new road system, unless you want to. You can still get base plates, either new/used from Brick Link or from 3rd party vendors (they even sell double packs of straight roads). I was considering whether or not to switch from 6312 to a MILS-style system, with the new roads I can most probably get there cheaper.
@xhearthfirex6571
3 жыл бұрын
Don’t buy this crap, go to a alternate Brand and buy their Road-Baseplates. Most of them have exactly the same as Legos old ones, even cheaper and their quality is for the most part as good as LEGO’s. No problems fitting other bricks on them at all
@84erElessar
3 жыл бұрын
Why solving the problem? Boycott this system! It looks terrible and is garbage. And it is expensive as hell!
@Nikioko
3 жыл бұрын
Lego is holding a contest: how far can they go with ripping off their customers until the last fan boy notices? Obviously they haven't gone far enough yet.
@xhearthfirex6571
3 жыл бұрын
We really need to boycott this ! Buy every Road-Baseplate you get and then buy them from other Bricksystem Companies. Some actually improved so much on quality to even rival LEGO and they still have Road - Baseplates ! Every Company that produces Brick build Sets is just Laughing at Legos face for making this mistake
@ronik24
3 жыл бұрын
The new road system is fine.... what bothers me more is the shiny tile surface. Objects just are normally not supposed to reflect in a road. If Lego would have at least come up with a road-like surface. The rougher surface on slopes would have been just ideal.
@michellee7465
3 жыл бұрын
I currently don’t have any road plates, so the new system isn’t a problem for me, as no transition.I much prefer the smaller and narrower roads. The tips are extremely helpful. 😀
@BricknIt
3 жыл бұрын
Thanks so much :) Yeah just trying to help people out who are on the fence about the new road system as its very expensive to buy road plates, new and old
@Gritt4reel
3 жыл бұрын
You do not mention that the new road is a bit smaller or thinner than the old road plates, which makes it hard for two 8 stud wide vehicle, such as Speed Champions or trucks to pass each other. Also the price for the set is quite high. Here in Germany it's 20 Euro which is twice as much as for the base plates. So the road is more expensive than the old one and you need to lift your whole city to use this, as the other system with base plates (which are like this for nearly 40 years) will let you spend some money. So you can ask yourself: Are they dumb to not think of this or are they clever to make it this way?
@ondrejm5042
3 жыл бұрын
its actually 4times price increase. In the old system u got 2 32x32 baseplates for 10, in the new system u get an area of 32x32 for 20e
@xhearthfirex6571
3 жыл бұрын
The standard LEGO City Trucks are „just“ 6 studs wide. Two of them won’t fit. Now try the 8 stud wide Speed Champions. Lego is testing us
@Gritt4reel
3 жыл бұрын
@@ondrejm5042 But they are (more) than twice as thick as a base plate. :P It's scam. point.
@flo4real_
3 жыл бұрын
Yeah I’m sticking with the old ones, first it would cost me hundreds of Euros to buy all those extra baseplates and plates to raise the modulars, second it would take so long to tear apart and reassemble the ground floor of every modular I have, and third I do prefer the wider sidewalk bc the ones on the modulars themselves are a bit thin for my taste. It’s definitely an easy system for kids to connect all their lego houses that are sitting around in the floor but for every Afol‘s Lego City these aren’t efficient and if it would be very costly and time consuming
@vstarvan
3 жыл бұрын
10:08 you don't actually have to take anything apart to separate the modular from the road, you can lift the building and keep the 2x2 plates attached to the sidewalk instead of the road.
@mummelutt
3 жыл бұрын
I think you're making it over complicated when you add the base plate under the road plate. Just ditch the base plate under the house and build it all with plates instead.
@nathansciamanna
3 жыл бұрын
Using separate plates is weaker than using 1 baseplate
@uncommonsense7830
3 жыл бұрын
Yeah, if you want to rebuild the whole first floor of EVERY modular you own.
@cosmicjenny4508
3 жыл бұрын
@@uncommonsense7830 Surely you’d only need to rebuild the tiling, because the building itself can be “peeled” off of the baseplate.
@uncommonsense7830
3 жыл бұрын
@@cosmicjenny4508 Not really, I own my fair share of modulars, and I can safely say those things are like fuckin' glue! They're built in a way that doesn't allow them to come off without taking everything apart. Plus, even if it was that easy, I would never spend that much time taking each individual 1x1, 1x2, 2x2, 2x3, and 2x4 tiles apart from the baseplate. What a waste that would be!
@TT-Bricks
3 жыл бұрын
one thing, plates are expensive and the new road system is also more expensive then the 2 base plates sold together. So I hope they will keep the older ones too
@BricknIt
3 жыл бұрын
Yeah it gets extremely expensive. I personally think they will be keeping both road plate systems for a long time yet.
@flx4711
3 жыл бұрын
Lego called, they want their building engineer back. All seriousness this is super slick and clever. Nice work!
@BricknIt
3 жыл бұрын
haha thanks so much mate :)
@MamasBricks
3 жыл бұрын
Cool! It does cost a lot so I I'm not there yet. But defenately going to buy a set to check it out! The probleme I have with it is that it changes the grit.
@BricknIt
3 жыл бұрын
Looking at the potential leaks of the new modular, the old road plates will be staying anyways :)
@user-ev8jc7uo1v
3 жыл бұрын
I think this system is stupid, I'm not even going to consider buying these trash versions of roads. The 2 sets of normal road plates are perfect for modular buildings and much easier. I would advise you to not waste your time or your money on this bad excuse for a city road set.
@pewpewdragon4483
3 жыл бұрын
Probably not an ideal solution, but: put loose flat tiles underneath the base plate of the modular building to raise it to the right height; minimal work, makes it compatible, just that the tiles are not attached XD
@kennethcarozza6147
3 жыл бұрын
I do not mind the idea of turning the city into a "Mini Mills Plate" as you say, I just wish lego would design, and release a smooth curve. (I have never liked any mills plate curves I have seen so far) I feel like lego is forcing everyone to build cities with just straight, Tee, and 4 way intersections. (I also heard a rumor that baseplate roads may stay for 18+, and the new road plates are for 5+ builds.)
@Ryuuguu13
3 жыл бұрын
I like the thought you put into this. As someone not terribly committed to to baseplates (outside of the annual modulars) I've been on the fence. Although outside of modular buildings looking back over the years.. I've also been ignorant to the fact baseplates are on life support thanks to modulars. Idk, this is a tough one, plus I'm feeling the pressure that road plates are officially "retired" and oos at most retailers. Please send help. My head hurts from trying to figure out what to do lol
@Alverant
3 жыл бұрын
It looks expensive if you have a lot of modulars. But if you have a lot of modulars you already have a lot of money. I still like the old roads. I have big hands and trying to add the details for a two-lane road that's 16 studs across is going to be hard. OTOH you can (in theory) make roads with any number of lanes like a 5 lane main street and 1 lane alleys between buildings and 2 lane residential streets.
@RW-zh7kl
Жыл бұрын
You would think Lego would have already had a layout done with the new road system. Then been like "hey look how awesome our new road system is and what you can do with it!" But.. no. Atleast I haven't found that anywhere yet.
@alpineweissm7501
3 жыл бұрын
I avoid all of these problems by placing all of my modulars on top of another baseplate, and overlapping them over the road baseplates. That way they are on the exact same height as everything else, the roads take up less space, and I can still move the modulars around as much as I want. I also don't have to modify the modular buildings at all, they are still on their original baseplates.
@taurussuperior8740
3 жыл бұрын
There is NO Reason to use this new streets ! Use alternative Brands !
@landedfalcon1605
3 жыл бұрын
I don’t actually have any roads in my city ‘roads? Where we’re going we don’t need roads!’. Although, if I’m honest, it’s more because I couldn’t be bothered buying any and now don’t really have space and the shapes would just be way too complicated 😉 Looking forward to new city vids though, just wish I didn’t keep getting ideas for new sets from you 😂 Also v interested to see how you get on with lighting
@BricknIt
3 жыл бұрын
Haha sorry im feeding your addiction! lol
@landedfalcon1605
3 жыл бұрын
@@BricknIt I can tell! :D lol
@hakanstorsater5090
3 жыл бұрын
I managed to snag a bunch of cheap road baseplates of the earlier generations (1978-2001), which are fairly compatible with each other if you smoothen out the transitions, so I'll go with them if i am to build my own Lego city. I live in a pretty cluttered apartment, though, and I'm starting to realize it might take some time before I could have available the time and space required...
@Legoboy3998
3 жыл бұрын
Wouldn’t it be cheaper just to leave the new road plates alone and simply set an additional baseplate under the untouched modulars? The two baseplates should make the modulars about one plate higher than the road plate, and you can still move the modulars by simply picking them up, without having to disconnect anything.
@fhurlbrink
3 жыл бұрын
Best solution
@TheOtherGuys2
3 жыл бұрын
That's gonna eat up a TON of plates. Basically you're saying we'd have to make a double-layer of plates underneath every single building. while it could be handy for eating up some otherwise hard to use colours (I'm looking at you, orange..), it's still gonna be crazy expensive. One thing I would suggest is to come up with a system that doesn't require a baseplate underneath the roads and buildings. Like, if you're going to have a base built out of plates anyway, why have a baseplate under it?
@TheOtherGuys2
3 жыл бұрын
I've made a little (I say little, but like 1800 pieces) build in LDD of a way it could be done, which actually transitions between the new roads and the old road plates. It's a little tricky, because the new road plates are narrower than the road baseplates. The new plates are 2 lanes in 16 studs, where the baseplates put two lanes in 20 studs. If you're interested in seeing what I came up with, I can give you the .lxf file. I may have also included a quick and dirty modular style building. The downside of my idea is that it doesn't allow a connection between the road and the building. However, if you have a decently sized city, I don't think that should be a problem. The plates will be thick enough that they're not going to slide over each other or anything.
@erickok
3 жыл бұрын
Alternatively, put the modulars on plates directly? Cheaper and you still get the benefits of the (smaller and more versitile) new roads.
@mummelutt
3 жыл бұрын
That was my thought as well. Why bother with the baseplates at all?
@lesserz6310
3 жыл бұрын
I'm not a city builder, it has crossed my mind...but, this does seem wrong. True, building another layer is nice for light wires. I don't have a desire to do so. Nor do I desire to have to build extra layers to raise structures. Unless they plan to raise all their structures themselves, which means more parts count and higher prices in the future. Give it a couple years and let's see how it goes before I decide to jump on board or not. Don't get me wrong, I kinda like how modular and customizable these would be.
@sylvainblanchard2671
3 жыл бұрын
Cheaper to buy 2 16x16 plate and replace the base plate
@BricknIt
3 жыл бұрын
Thats an awesome idea that i didnt even think of! Would be way cheaper too! ill definetely experiment with that when i get my hands on one of the plates
@TheAndersJames
3 жыл бұрын
48x48 baseplate, At least seven 2x4 plates to support a 16x32 area. Then a 16x16 green and a 16x16 gray. Lay a 16x16 road in front and that's half the 48x48 baseplate, plus the sidewalk will be a tile up. Several of the new city sets and the road plate set come with 8x16 greens and similar sizes, so modular sets can be easily upgraded by exchanging the baseplate with two 16x16 plates, or an 8x16 green plate with maybe just two other plates.
@dlbrickerstudio
3 жыл бұрын
good video Chris ! maybe this is another way to me for the new road plate !
@BricknIt
3 жыл бұрын
Yeah its a least an option :)
@aussiereuben1
3 жыл бұрын
To my mind a difference of two plates between the road surface and the footpath would be more realistic. This would the baseplate for the modulars would be three plates high with one layer of smooth plates (=4 plates high against the 2 plates height of the road sections). I suspect that we'll see 16x32 (or similar) by 3 plate high baseplates, likely with holes along the side for technic connecter pins as are now built into the walls for the modulars. This would make the modulars more modular with the connector pins in the plates rather than trying to match the pin locations in the designs of each modular. Parks, gardens, alleyways, and more will now be options for offical Lego modulars as the location of the connector pins wouldn't matter. I suspect we'll also see special connections/connectors to bridge between the new road plates and any new baseplates.
@MrDulkes
3 жыл бұрын
If you build everything on baseplates, then you could also just remove the Baseplates... But there’s a much simpler solution. 1. Take 2 48x48 baseplates side by side. 2. Put road on three edges of the baseplates. You should have a 64 x 32 area surrounded on three sides by road. 3. Put some plates on the 64 x 32 area. 4. Put 2 modulars, baseplate and all, on the plates (loose on top of the studs). The sidewalk of the modular is now exactly one plate higher than the road. Very cheap. No modding of modulars required.
@fhurlbrink
3 жыл бұрын
Or, just do, from Step 2: 2. Put road on one of the long edges of the basblates. You should have a 32 x 96 area aside to the road. 3. Put some plates on the 32 x 96 area. 4. Put 3 modulars, baseplate and all, on the plates (loose on top of the studs).
@MrDulkes
3 жыл бұрын
@@fhurlbrink absolutely, I’m just trying to convey the geometry. You do want to do something around the edges of the modulars, because they will just slide off if you don’t. That’s why I described the “u shaped” road layout.
@peternike7637
3 жыл бұрын
You have solved it the best! I love the idea
@BricknIt
3 жыл бұрын
Glad I could help!
@dlbrickerstudio
3 жыл бұрын
My cheapest solution is just placing paper under the modular buildings to make the new road plates the same height as the modular!
@magnuschristian7663
3 жыл бұрын
Look ugly xd
@dlbrickerstudio
3 жыл бұрын
But you can’t see it and I am just 14 years old,I don’t have much money to spend on so many baseplates
@-Sangral-
3 жыл бұрын
@@magnuschristian7663 How? If it's literally under the baseplate and you won't see it?
@MultiGasmGeek
3 жыл бұрын
And at the end of the video it finally makes sense. LEGO will make more money because of the update to the new road system. Love the idea of adding plates to incorporate lighting system.
@adamb2619
3 жыл бұрын
Apple figured this out long ago. Create a new 'improved' thing, that works with nothing they currently make, but if you buy more stuff, you can make your old things work with the new.
@1upfx281
3 жыл бұрын
I've been debating if I like the new road system. This video makes me slightly more optimistic. I'll still need to buy some and experiment to decide if they're for me.
@BricknIt
3 жыл бұрын
Yeah exactly :) I just wanted to keep an open mind and experiments, after all that is what lego is about :)
@mr_torle
3 жыл бұрын
You can buy the bricks from an alternative Lego producer. That will be cheaper...
3 жыл бұрын
I'll still using a 2005 road plates because on this plates its easier to build house next to the road
@-Sangral-
3 жыл бұрын
I would actually do that way easier where you don't need the extra baseplates at all. Just leave the road plate as it is and rebuild/move your modular building from the baseplate on to 2 16x16 plates, 1 8x16, 1 6x16 and then you have the space for the boardwalk connection, under them you can put the same "outline" that you have with the 2x4 plates. Done. You have the exact same effect like in your video but without any baseplates. You don't need one extra for the roads and you basically do it exactly like you did, but minus the baseplate on the modular building and road plate. Love your idea for the raised sidewalk by the way. These 2x2 plates with only studs on one side are the ultimate solution for that problem.
@badgerjoey
3 жыл бұрын
I was planning on just raising the modulars up on some thin acrylic 32x32 sized sheets. Don’t fancy disassembling every modular building to do it this way
@PaPasBricks
3 жыл бұрын
Love your idea for a fix. I will just leave it with that. Don’t want to get negative. I’m looking forward to the new system but still not sure if i will switch. Thanks for sharing.can’t wait to see more of your LEGO city. 👍
@AussieBricks
3 жыл бұрын
Love the diplomacy. 😂
@BricknIt
3 жыл бұрын
hahaha. I never realised how heated the conversation about these road plates would be lol. Im of the same opinion as everyone else when i saw them but for me the added space it will give me is why i tried to see how easy it would be to fit them into the city. As you can tell im still 100% sold on them, but seeming as i will be buying some of the new city buildings next year anyways and they come with the plates im open to testing them and trying them out :) sadly that does make the sets even more expensive!
@BricknIt
3 жыл бұрын
hahaha!
@PaPasBricks
3 жыл бұрын
@@BricknIt i understand the space savings , but the cost is going to hi. First you have cost of the baseplate and then you have to buy the other plates to build it up. I think is a lot of AFOL go this way there will be a shortage of the additional place needed to raise the new road plates. Like the light blue gray tiles. If that’s the case you will have lots of plates you can’t finish because of lack of parts. I guess time will tell. 👍👍
@LordAssomous
3 жыл бұрын
Funy thing to know about the new road plates. If you buy 2 Sets of then, you can't connect them. There are no extra tiles in the Set. So you either already have Lego at home and are propably already using the old roads, or you will never be able to build a bigger street without buying tiles from a second hand shop or website. Great thinking by Lego
@bzbricks3621
3 жыл бұрын
why they take away baseplate road plates why??? this just making it complicated...but good work man!
@natbarmore
3 жыл бұрын
I'd say just add 2 plates of extra height under the building, don't add a baseplate under the roads, and then your sidewalks are 1.5 plates above the road surface. No need to connect the roads and the plates the buildings sit on, because they'll be trapped so they can't move around.
@brickyty1980
3 жыл бұрын
This is good in theory, but unless you have all those parts spare, it's probably cheaper to go full mils plates if you're just starting out your city, for an existing one, say bricksie or alex nunes, doing that for every building is going to be mega expensive, be cheaper to put 3-5mm ply under all the buildings and sink the road to get the height. we shouldn't have to fix this, just lego getting more money out of us. like the idea though, but for small scale builders its going to cost too much.
@BricknIt
3 жыл бұрын
Yeah exactly. My City is no where near as massive as Alex's and i would not bother changing at all if i was in their shoes. At the moment i am on the fence about it which is why i made the vid :) to try and problem solve the issue :) im hoping that the old road plates dont go anywhere so people ca use whichever system they want :)
@rainerzufall9587
3 жыл бұрын
what is the Lego-number for the 16x32 baseplate for the roads?
@Lightning_Lemon
3 жыл бұрын
Is that felt on your table? I was looking to put something similar on my desk to protect it and stop pieces rolling everywhere.
@BricknIt
3 жыл бұрын
Yes it is :) Its a large felt mouse mat :)
@StefanM2803
3 жыл бұрын
Hopefully all new Modular Buildings starting 2022 will have a higher base. I would prfere it
@RCmies
3 жыл бұрын
Umm... Wouldnt it be better to just build the modular building on regular plates and ditch the base plates altogether? Then you wouldn't have to use another base plate under the road pieces. Just do the same what you did but without the base plates. But instead of laying the 2x4 etc pieces on a baseplate just put them on the bottom of the 8x8 plates and maybe reinforce it a bit better. That way you don't have to spend a fortune on 16x16 or 32x16 baseplates that you can't find anywhere anyway.
@trainerseebus2779
3 жыл бұрын
I like what you've done. it adds a nice curb. However my plan is to just put a layer of baseplates on my table. Place the road plate directly on the table baseplate, and rest the modular building as is on top of the baseplate (built on its own baseplate just set on top of the table baseplate. This makes its sidewalk even with the road. I can choose to clip it in then, or just have the roads and other buildings hold it in place.
@BricknIt
3 жыл бұрын
That seems like an awesome idea :)
3 жыл бұрын
8 stud-wide vehicles that don’t fit the roads.Make new roads.New roads don’t fit any of the buildings.Make new buildings? A new road system that can be planned out,is a pointer to the future,but City appears to have regressed to kiddy-town.Just what the heck is LEGO doing?
@badbob001
3 жыл бұрын
Or slide some cardboard under the modulars and call it the day. Naturally the cardboard comes from old set boxes so you are technically still "in system". :)
@jstuds9520
3 жыл бұрын
I really needed this video!!!!
@BricknIt
3 жыл бұрын
Glad i could help :)
@bricksanchez
3 жыл бұрын
That is a great solution! It could also be possible to use the big grey baseplates as the base for an entire city and then just placing the modular with the baseplate on top of those grey baseplates (plus one plate of height for a curb) so you would not have to modify each modular 😱 it would be a bit more costly I think tho 🧐
@bricknmotor
3 жыл бұрын
Youre thinking of mobile homes. Them can be moved in 1 piece. Modular is prefabricated in sections and put together on site. So they are meant to be permanent once bolted together. 😁
@aaroncarr5725
3 жыл бұрын
the roads aren’t made for AFOLs or for the modulars though. that system works for the 3-1 creator sets and the regular city buildings. they finally brought the roads up to 95% of their buildings.
@urshurakdieohnekanal9291
3 жыл бұрын
Basically, if I wanted to apply this solution to a city full of modular buildings on regular base plates, I would have to buy a lot of stuff and I would have to rebuild at least the ground-floor of every building - all that, just because Lego isn't able to offer regular road plates in different sizes. Well, no thanks.
@Grottenolm
3 жыл бұрын
So you JUST have to buy a bunch of plates for ALL of your buildings ?!? Seems to be a good solution.... for all the Lego-CEO´s. Another new car, house, yacht,.... Oh, next i wanna know how you fix the problem with the missing curves. Or can we build only New York city-style towns from now on ?
@Craigmt12
3 жыл бұрын
I like what you’ve done here. I’m looking forward to experimenting with the new road system. Should make a dual carriageway easier to do. Think I’ll use both the original plates and the new system in different areas!
@BricknIt
3 жыл бұрын
Thats a very good point! A dual carriageway would look awesome!
@madjockmacsporran
3 жыл бұрын
You don't actually need any of the baseplates for your method here. Simply leave these out from beneath your roads and your buildings which will be a significant saving on parts. You can, in fact, leave the modular building on its original baseplate and raise it up to the correct height by placing it on top of one layer of plates. This won't allow you to connect together the roads to the modulars in the same way but it's a cheaper way to do it.
@corner559
3 жыл бұрын
What was Lego thinking? Dear Lego, don't get rid of the baseplates!!
@Grottenolm
3 жыл бұрын
I know what they are thinking. Spoiler: it rhymes on "Honey"
@princez.2648
3 жыл бұрын
See, as someone who hasn't started a city yet, i love the new system tbh...
@wruzzer
3 жыл бұрын
so u like being forced to raise all new buildings u buy cuz even for those the streets are too high? ok dude.
@papashak2138
3 жыл бұрын
I like your thought process, but I would adjust it by making your modular base a full mini mils and just adding tiles to the road plate so that you can still pull everything out and move around as is often the case. Bravo for rolling with the change and not just throwing up "roadblocks" (sorry for the pun)
@BricknIt
3 жыл бұрын
Thanks mate i really appreciate it. Some people think ive been paid, because i am embracing the change lol
@wruzzer
3 жыл бұрын
It's only a change if you accept it. Why not just buy old baseplates instead of wasting tons of money on ugly, reflecting roads which are too small for most cars and don't fit naturally into the baseplate system?! Makes zero sense.
@bricksloth6920
3 жыл бұрын
I have vintage lego roadplates, they'll do for me. I don't have bricks to spare building MILS plates.
@BricknIt
3 жыл бұрын
Yeah, exactly :) i think if u have the old ones and like them then keep them :)
@bradgamwell3584
3 жыл бұрын
I love brick built roads but also like the simplicity and cheaper cost of road plates. Word to the wise: go buy a stockpile of road plates. You can always sell them in the future.
@joehead1496
3 жыл бұрын
The real question is what will the new modular have for its base. Will it be same as the previous ones or will it be a new design to link to the new roads. Guess we will find out tomorrow...
@BricknIt
3 жыл бұрын
Yeah this was my worry and the main reason i started tinkering with the new system. I believe its going to use baseplates though so everyone can breath a sigh of relief :)
@Alverant
3 жыл бұрын
If they're still selling baseplates it shouldn't be an issue. You'd just have to put the modular on it. Or if you're really sure you want two buildings next to each other, get a 32x32 baseplate for them and use a 16x32 for the road outside.
@Taliesyne
3 жыл бұрын
I do like the look and versatility of the new road plates but for me they may not be ideal. My Lego town hasn't seen the light of day in 20 years and if I ever decide to buy the modular city buildings then I could incorporate the new plates with the old somehow, maybe use the new for the city centre and modular buildings and keep the old for the outlying areas. They don't really allow for inner city street parking or for running a monorail through the city centre though without building up adjacent plates. There is much to consider....
@christophergardiner7372
3 жыл бұрын
This was my working theory on how to do this. Then I looked at my 11, soon to be 12 modulars 😅
@jessem8928
3 жыл бұрын
This is a good idea, after you get your hands on a few road sets we will see if you stick with this plan.
@helengray2426
2 ай бұрын
So useful, thank you.
@f1fanboyracing212
3 жыл бұрын
Thanks for the tips l related to the same problem
@BricknIt
3 жыл бұрын
Happy to help :) Its not a perfect solution but at least its a start :)
@jorgeparra196
3 жыл бұрын
Everyone is criticizing this new road system, but I really like it because it will allow me to have wider roads for the new bigger cars and more details around.
@BricknIt
3 жыл бұрын
I think people sometimes just don't see other peoples point of views. The vid is supposed to help people that want to adopt the new road system. I am also very interested in it aswell, that why i made the vid :) and i hope it helps people who are :)
@TheItalianoAssassino
3 жыл бұрын
what? the new roads are smaller
@BricknIt
3 жыл бұрын
Wolf. You can actually attach 2 road plates together from the sides to make them wider than the baseplate ones
@brun0z691
3 жыл бұрын
@@BricknIt yoooooo
@wruzzer
3 жыл бұрын
@@BricknIt Thing is, by buying those streets you tell lego they did something good. And they clearly didn't. It costs more, u have to buy more parts to make it work even if you use buildings NOT attached to baseplates cause the streets are way too high and the streets are too small for most cars. sure, u can use 2 plates next to eachother, but then the road is too big for most cars and u have to pay DOUBLE the already expensive price. so even if you like them, you shouldn't buy them. just to show lego they did big bullshit. maybe they will come up with something actually good next time.
@Thantas
3 жыл бұрын
I’m about to start making my first corner with modular buildings.. What about the curves in the new road system? How do u make a curve??
@schwabricks7703
3 жыл бұрын
Will deffinitky be upgrading to these new plates thankfully my lego city isn’t 25+ buildings but this will be a fun venture. Should be fun to make the roads 2 wide. Wonder if they accommodate for the newer speed champions sets.
@bluesfreak1614
3 жыл бұрын
Just buy other streets from other companies. xingbao etc have the old ones... Much cheaper
@robd3529
3 жыл бұрын
With all due respect we shouldn’t have to buy extra bricks and plates just to accommodate the new road system, if you have a dozen or more modulars or buildings on your city the cost in extra plates etc just to make the roads compatible would sky rocket immensely. Don’t get me wrong Lego has come ahead in leaps and bounds over the years but I don’t think the road plates needed to change that much with the possible exception of maybe different designs on the plates aside from the standard 4 plates
@BricknIt
3 жыл бұрын
I completely agree! It was really annoying me trying to figure out how to attch them to my existing setup which is why i started making the vid, hopefully t help people who had the same worries :)
@beakerJT
3 жыл бұрын
This seems at least a way to resolve it but to buy the new road plates and then have to buy a 16x32 plate to fit under them all sounds expensive (might as well make my own!). And then have to make all my modulars a bit higher to fit as well as 😱 of which I have about 12 of, then its not really a solution at all. Lego should not make new systems that do not fit in with existing systems - solutions by others should not be needed. Thanks anyway! 🙂
@metroid767
3 жыл бұрын
I wouldn’t say having to rebuild every single modular set on an additional custom formatted baseplate is a solution at all. Completely impractical. Unfortunately, it seems that the new road system is really made for the new simple City sets and builds only. It doesn’t seem the modulars were considered at all.
@lukeshrubsole6087
3 жыл бұрын
Finally someone has a sensible idea, rather than laying base plates on other plates. I’ve been saying this for ages, everything on my layout is on plates rather than base plates to create a proper curb line. Liked and subscribed. Keep up the good work.
@sinisterisrandom8537
3 жыл бұрын
if i'm trying to design a town or a city that isn't modular and was built around the terrain i can see this working but only in certain areas but this "new" road plate only really works if your doing a city that's in ruins.
@jumpsuitart
3 жыл бұрын
Very cool! However, wouldn't it be cheaper to get rid of the baseplates on modulars, and just replace them with 16x16 and 8x16 plates? Phase out baseplates - go with a 3 plate high system? (plate +modular -baseplate and plate + 2021 roads) Baseplates aren't readily available, but 16x16 and 8x16 plates are still being released.
@Ottawa1988
3 жыл бұрын
Hey, do you have a part list for the pieces you used? Thanks!
@simonmoss101
3 жыл бұрын
It’s a shame to have to devise a modification to something that’s new. I love their concept and they look to be space saving compared to the old ones. They also look easier to use on the MILS plate system. They have a place in the Lego world and have come at the right time for me as I’m looking to start my city next year.
@BricknIt
3 жыл бұрын
Yeah matey. I think in a few months when people experiment with the new system we will see even more pro and cons of which road system works best for which cities :)
@GreenGuitarGuy
3 жыл бұрын
Great video Chris!
@uncommonsense7830
3 жыл бұрын
No thanks. I'll just be building custom roads. That is way too much effort.
@celestek.b.5257
3 жыл бұрын
For the baseplates under the roads, you could probably use all those intersection baseplates people bought in the two pack and then tossed aside...
@SarkadiGabi
3 жыл бұрын
Your solution is nice. It is fine that you found a way to connect the new system to the existing buildings. BUT!! This does not solve the price issue, does not solve the size issue - two cars / trucks next to each other have just not enough space, does not solve the curve issue. AND Imagine a person having an existing city of 20-50 buildings. Now calculate the costs that LEGO ® FORCES you to take in consideration to rebuild your whole city. Or just parts of it - if you try to expand your city with the new system.
@Kritzelpaul
3 жыл бұрын
I'm exited for the new system! I think it looks way more brick build than the old boring plates and needs less space as well. I really liked the street design in the lego movie, and they remind me of that. And maybe they will change the modular houses now to fit the new system. I guess we will find out tomorrow.
@BricknIt
3 жыл бұрын
I think the modular will keep the same old style looking at the leaks :)
Пікірлер: 421