I’m still using your vids and patches for my pod x3 live 😂😂 I think it’s time to upgrade!
@shanehumphries5741
4 жыл бұрын
Just unboxed my Pod Go, thanks for this set up page, your a legend 👍
@reneliebregt6319
4 жыл бұрын
Great video , but I want to mention that it is not necessary to use the line6 updater for installing the newest firmware. Pod Go Edit does the job. After installing Pod Go Edit you connect the Pod Go and login to your line 6 user account from Pod Go Edit and then Pod Go Edit will automatically check for updates and update the firmware after a backup of all the presets !! I got mine yesterday and Pod Go Edit updated the firmware from 1.01.0 to 1.11 😀 This procedure is also described by Line 6.
@MChadRussell
4 жыл бұрын
I've been hoping you would get the pod go. Great video! I can't wait to see more!!!
@jenaviveh6973
4 жыл бұрын
Thanks for the step by step information. I can’t wait to get my hands on one!😆
@viniciuscarvalhomusic
4 жыл бұрын
The PSU looks better than the one that comes with the Hx Stomp. Nice
@MartinCraneRockbeast
2 жыл бұрын
Perhaps you can think of putting together videos where Pod is in conjunction with Stomp, so therefore greater DSP can be shared across the two.
@bobbywilliams4655
4 жыл бұрын
Great video. You always have very good and informative videos.
@im58woody
4 жыл бұрын
I just took delivery on mine and the size is really nice. I previously owned a HeadRush Gigboard and Hotone Ampero. And this one is as easy to program as the Gigboard and Ampero. Tones are really good so far and easy to tweak. It fits inside my nap sack that I use to run back and forth between churches leading worship. I haven’t used it yet in church but look forward to that with my acoustic and occasionally with electric guitar. I really hope that you get your acoustic patches ready soon for this. I will say that the Ampero was more acoustic guitar friendly than this Line 6.
@davebassP5
4 жыл бұрын
Nice informative video. Thinking of updating from my Stomp and this video has helped a lot. Would you mind measuring the distance between the foot switches if you get a mo. I want to make sure they aren’t any closer than my Stomp. Thanks again.
@ruitar
3 жыл бұрын
Thank you brother
@BibleBeltBlues
4 жыл бұрын
Hey Glenn. So glad you did this video. Thanks. I think I am going to take the leap for this unit and your vid helps. Question - I love the intro music for this video...sounds like it is a slide on a cigar box guitar but I had to ask if perhaps it was one of your presets? If so....will want that one! Beautiful sound. My guess is that it is not but had to ask anyway. Subscribed....looking forward to more of your Pod Go vids. H
@denniskrottje012
4 жыл бұрын
Thanks!!
@teddysarapung3745
3 жыл бұрын
Nice 🔥
@sjsphotog
4 жыл бұрын
nice overview Glenn. Im surprised they didnt include that nice plastic color overview sheet for the "Getting Started" newbies (thats included with the LT and full Helix) but I guess they had to cut down on costs and the Go is already simple as it can be so....maybe redundant :)
@Muki992
3 жыл бұрын
Great video nice music ! So basically the pod go’s connection to the pod go Edit software on the pc, is just through USB ? No audio interface needed? Thanks !!
@dhanabaytimberlake0718
7 ай бұрын
I can't get Go Edit to open up on my laptop. An erroer message say "The code execution cannot proceed because MSVCR100.dll was not found." I am using Windows 11. Now, when I'm trying to download it, on the "os" pull down menu, Win 11 is not listed. It only goes as high as Win 10, so I chose Win 10. Why is this happening?
@jonedward1076
4 жыл бұрын
Can I get the software on a disk. I only have Internet on my ph
@user-jz4gy2vk4c
Жыл бұрын
Hi Glenn,on the fence with the Go or Boss GX100,ME90,which unit would you recommend? thanks.
@TheRycooder
4 жыл бұрын
Can't Download the updater. Got the drivers and the page , weird!
@stefanocharles1974
3 жыл бұрын
Sir the page of this line 6 doesn't open.. I don't know why.. When I try opening with my pc it shows this page dose nt exist or error plz help
@bmann792
4 жыл бұрын
Hey glen how does this sound just plugged into the front of an amp with flat EQ? I have a blues deluxe with a super clean channel it doesn’t have an effects loop
@flashg5454
4 жыл бұрын
Hi Glenn, following your install direction thanks. Having some issues with downloading edit and update. Do you know why I am not seeing on far right side the block that says Public I see beta and Archival to check off? not sure if thats my problem.. Thanks
@GlennDeLauneOfficial
4 жыл бұрын
Hi, unless you are a Beta Tester (which I am) you won't see those choices. I guess I should have mentioned that. Sorry.
@gs4777
4 жыл бұрын
Great video always.. Do u have original box dimensions??
@GlennDeLauneOfficial
4 жыл бұрын
20" W, 12" D, 6" H.
@gs4777
4 жыл бұрын
@@GlennDeLauneOfficial thanks!! I am trying to make pedal board for pot go.
@GlennDeLauneOfficial
4 жыл бұрын
@@gs4777 You asked for the "original box dimensions". You do realize that the actual POD GO dimensions (The Unit itself) is not the same as the "original box dimensions" right??
@GlennDeLauneOfficial
4 жыл бұрын
If you are wanting the "Actual Dimensions" of the unit itself they are 313 x 520 x 148mm Sorry of I mis understood you.
@gs4777
4 жыл бұрын
@@GlennDeLauneOfficial no .. original box it self..black line 6 box contains pod go... 14.1 x 9.1 x 3.5 inches are the actual unit size . Thanks
@sakatuni
4 жыл бұрын
Know this is off topic but have you received the new Fractal FM3? Looking forward to your review/presets video
@GlennDeLauneOfficial
4 жыл бұрын
No I have not gotten the FM3. No plans of getting as of right now.
@Ou812em
4 жыл бұрын
👍🏼
@davidmurray9193
3 жыл бұрын
When I get mine, if I do the four cable method into my laney 120h full stack can I still use my amps clean, distortion and lead of my amp and use the effects of this unit if and when I want to, as I like the sounds of my amp but want a modler that allows me too, versatility is key for me
@GlennDeLauneOfficial
3 жыл бұрын
Yes you could totally do that.
@davidmurray9193
3 жыл бұрын
@@GlennDeLauneOfficial nice one thank you
@davidmurray9193
3 жыл бұрын
@@GlennDeLauneOfficial got my pod and when I put it into pc it's coming up pod not connected but I have pod going in via usb, what's a good external expression pedal to go with the pod (metal heavy duty)
@seabee127
4 жыл бұрын
Glenn, quick question please. Looking to buy my first multi fx pedal to be used primarily through an amp or headphones. Maybe you could give me a recommendation between the Mooer GE 250 or the Line 6 POD Go ? Thank you Phil
@timjoseph887
4 жыл бұрын
I bought the Go, heard the Mooer was noisy!
@GlennDeLauneOfficial
4 жыл бұрын
POD GO FTW!!
@timjoseph887
4 жыл бұрын
I want to just control my Egnator's volume it's way too loud how do i do this with the Pod? no effects, cables etc...
@genghisfimpley3516
3 жыл бұрын
Bruh just buy a volume pedal don’t spend 450 on a volume pedal
@giovannidelmastro3760
4 жыл бұрын
si può mettere il delay in parallelo?
@willman100
4 жыл бұрын
Hey Glenn great video. Can you tell me if you can switch channels on your amp with this unit?
@GlennDeLauneOfficial
4 жыл бұрын
No it can't do that. You have an Amp ot jack but that's to send a mono signal to the front of your amp.
@willman100
4 жыл бұрын
@@GlennDeLauneOfficial Thanks. I wish they would have made the Helix LT that size. It would have been close to perfect in my opinion.
@JPTyler
4 жыл бұрын
FIRST!!!😄💪🎆
@padawan9127
4 жыл бұрын
I Like Glenn, but I don't like his brother, Mo!
@christianbouchard7136
4 жыл бұрын
Line6 are expensive and have always let me down, Mooer do better at a fraction of the price.
Пікірлер: 49