Eman helping everyone get the setups just right. Thanks for showing all your hard work so the rest of us can learn.
@nofreerides7033
Жыл бұрын
Now that’s mint …didn’t fall over much 👍👍👍smooth…
@spike--
Жыл бұрын
🍻 🤸🏼 watching mark Santa Maria right now. Such a riot.
@davidconaway2830
Жыл бұрын
I bought a 50c battery with my Promotto yesterday so I could take it out for it's maiden run and have determined the 50C just isn't enough to make it work in "wheelie mode." I have two 7200, 120C Zeee batteries now and hope to try it out soon.....damn rain! At any rate, the running I could do was awesome as soon I figured out the turning, which takes the right amount of throttle and steering input. Shoot, even my wife was impressed:-) Love the vids Earl, keep up the good work.
@henryfoster3212
Жыл бұрын
Earl Moorhead tank you for all you for this hobby tank you all Earl 👍😎 cool job on bike cool video
@carstenl87
Жыл бұрын
“Like Lightning McQueen!” 😂😂👌🏼
@earlmoorhead5555
Жыл бұрын
Lmao right he made me laugh to
@RC4X4
Жыл бұрын
Looking good! I switched mine over to my DX5 Rugged, works better. I did go into mode 3 by accident and launched it off into a huge wheely and scratched up the rear fender and a little nick on the rear helmet. I use this one as my runner and get another for display.
@jeremystewart1785
Жыл бұрын
The fun factor builds !!!
@drivenrc
Жыл бұрын
Great video! Some of my upgrade parts came in today which is a good sign of things to come!
@earlmoorhead5555
Жыл бұрын
Yes seems HH is pushing to get stuff out hopefully quality not effected to bad doing it 💯
@PabloDominguezassa-nn6cu
Жыл бұрын
I love the bmw wagon its so clean ! I like earl keeps it 💯 when he doesnt know, you learn with him keep up the fire builds love those lim's and Powerhobby wheel colors. Dope dike too.
@Carlosinator
Жыл бұрын
Thanks for this Video Brother! I'm still waiting on my Losi Moto but watching all the videos out there. Totally enjoy your experience and insight with these RC Vehicles. Total Fun!😎👍
@Bluecuban71
Жыл бұрын
Nice run ! Them adjustments worked out great 👍
@MRBRUSHLESS
Жыл бұрын
Good runs cool mods… done to the bike 🚲 great job thumbs up 👍
@earlmoorhead5555
Жыл бұрын
Thanks 👍
@JIPPERR_1
Жыл бұрын
Getting it dialed in every run 👍 just thinking about the steering, the reason it turns left to go right is because it needs to lay that bike down, so it drives the wheels out from under it to do that. Same on a full size bike. I'd be curious to see what the front wheel is doing once its in the turn cause it must turn back the other way. Lots of smart electronics going on for sure.
@earlmoorhead5555
Жыл бұрын
Trigger plays a big part to steering on this bike just like a real street bike you can hold the steering left bikes heading right and with the throttle you can make it turn tighter or bigger and the whole time the gyro is fighting to stand it upright 😱crazy feeling when running this rc for sure 👍
@024DJF
Жыл бұрын
Great control.
@terrykuehn2686
Жыл бұрын
Hey Earl! Liking the mods on the Pro Moto so much better on the turns overall on all surfaces! That guy was a Classic out there in the field your getting that cycle really dialed in Bud!😉👍📹💯✔️👋👋👋👋👋
@old-rcplane-phart
Жыл бұрын
Few years ago Du-bro introduced a plane, tricycle gear nose wheel front brake. This bikes front brake is almost an exact copy of that setup. Couldn't be 'exact' or HH would be owned by Du-bro. (Not that THAT would be a bad thing, seeing as what HH did to other businesses 🤷♂️.)
@laragefaf6782
Жыл бұрын
je kif toutes vos vidéo elles sont super merci
@earlmoorhead5555
Жыл бұрын
Thanks
@bryanharen8212
Жыл бұрын
I wish we could comment with a pic
@turonewyley9858
Жыл бұрын
You missed some really cool 😎😎 wheelie slow motion early in the grass but still love the video 😅🎉🎉🎉😊
@earlmoorhead5555
Жыл бұрын
Next time!
@RyanLumRC
Жыл бұрын
So much better with the training wheels up . I'd personally take em off completely 🤘🤘🤘 they look so toy grade with them down tbh , hopefully they take notes and produce a better version next run 🤘🤘🤘
@angelteamnolimit624
Жыл бұрын
Can’t wait to people 6s castle these lol
@michaelvankirk3576
Жыл бұрын
Thanks!
@earlmoorhead5555
Жыл бұрын
Appreciate the support my guy 💯🙏
@mattreetz3361
Жыл бұрын
Can't wait to see the difference in the dirt, looks like you might be able to get some better input from the trigger...
@spenn2007
Жыл бұрын
My man Earl out here practicing, you appear really comfortable with it now. I know i was trolling in past videos, however, you won me over, great channel. I hope you didn't give up on the speed runs, I'm buying my first Arrma Felony next month. That battery, are you using the large Spectrum charger? The charger it came with is terrible.
@earlmoorhead5555
Жыл бұрын
Yes bigger charger
@stevejackson3564
Жыл бұрын
Good test, I agree side bars all the way up is way to go. Looks like your getting the breaks down or close. Would like to see a test from full Throttle to hitting the break from a straight run. Did I here the clutch slip some, I would see if you can loosen clutch some just to see effects. Your close to race ready more than I have seen others bikes. What keeps the front forces springing back to normal. Is it like a servo saver or just has a spring . Thanks for great video.
@earlmoorhead5555
Жыл бұрын
Just a spring on the brake
@Bogues_88
Жыл бұрын
Adjusting brake trim while driving is bad idea because U could have lot drag on pads .. put travel to max spin the wheel by hand and adjust trim as much as U can with out it having friction. At end of day a stronger brake servo is only real way make front brake much better
@earlmoorhead5555
Жыл бұрын
@roblapouple7552 or adjusting servo voltage to existing servo 🧐
@Bogues_88
Жыл бұрын
@@earlmoorhead5555 guess it depends how long u want it to last if its not a hv servo
@earlmoorhead5555
Жыл бұрын
@roblapouple7552 most are not stock normally I push my stock one with voltage to speed up response
@meirdeaph
Жыл бұрын
Awesome ❤
@RichardChristian-pz5gh
Жыл бұрын
Super glue and baking soda will do the trick on plastic.SANDSHARK RACING 512.
@roblabato
Жыл бұрын
Earl did you move it to your house are we going to get to see your new workbench and RC storage looking forward to it
@earlmoorhead5555
Жыл бұрын
Still working on it
@Deezarehairy
Ай бұрын
Boots wear right down though Mine looks like he's had a double foot amputation.
@rctrucksamerica6868
Жыл бұрын
Awesome video! Thanks for all the videos. Any way to message you have a few questions and you seem to know what you are doing. I just picked one up. Did you mess with the lean angle trim at all?
@joserobinson8419
Жыл бұрын
I got 2 of them red and blue
@nickmoe16
Жыл бұрын
Losi gives you in the box shorter bump stops for the lean bars
@Bogues_88
Жыл бұрын
Yea my riders boots been destroyed .. I think boots are glued to leg at factory on wrong angle toes pointing out a lot 😡
@did3d523
Жыл бұрын
you should make Protections for elbow in Print 3D TPU , is it possible to make Stoppy (stop totaly the front wheel) ? is it possible to run whith gyro off with experience ?
@earlmoorhead5555
Жыл бұрын
To heavy I think
@did3d523
Жыл бұрын
@@earlmoorhead5555 for stoppy?
@earlmoorhead5555
Жыл бұрын
Yes weights down low so hard to get the front to hold
@davidbegeotsr4025
Жыл бұрын
If you slow down to gyro you will steer quicket
@randythompson1723
Жыл бұрын
😎💯💯💯
@monsterrc1681
Жыл бұрын
Just curious Earl, can you change the shock fluid on that bike?
@earlmoorhead5555
Жыл бұрын
Yes
@miguelescalante2449
Жыл бұрын
Hey man are you in newhall near Santa Clarita? Where is the bmx park located ?
@earlmoorhead5555
Жыл бұрын
Been in many videos but a quick Bmx track it pops up
@miguelescalante2449
Жыл бұрын
@@earlmoorhead5555 yeah man i used to live on the old rd I moved to Santa Monica a few years ago just got my promoto too been seen your videos keep up the good work hopefully we could hang out one day man and run the bikes
@jaydarciesrcadventures2233
Жыл бұрын
Hello Earl will that bike run on 3s thank you.
@earlmoorhead5555
Жыл бұрын
You’ll have to add an external BEC to run the gyro motor 50amp castle BEC
Пікірлер: 62