NEW Makita Tools Coming Soon... kzitem.info/news/bejne/t2iKnZWuq2Z8d3o
@shanewright4317
2 жыл бұрын
Hey! Would the new one have pumped the rugby ball up on the regular setting if its limit wasn’t set to 70kpa? Meaning have it set much higher? Thanks for your videos man!
@RogerThat1945
2 жыл бұрын
Price mention is handy. I just checked, and the newer one (181 vs 180) is 75% higher price where I live (approx. USD equivalent $80 vs $140 our amazon); might have to flip a coin to decide (as lower price & weight/smaller storage is also good).
@ralphcantrell3214
7 ай бұрын
The lack of a locking trigger is tragic. I guess I'd just keep a foot of parachute cord on it to tie up the trigger when needed.
@timvangool291
2 жыл бұрын
I prefer the quick clip on method. I use it on my racebike to fill my tires. Best Makita tool i own and also the cheapest in the toolbox :D
@Ya-never-know
2 жыл бұрын
It’s cool but I’ll probably stick with the original as it fits perfectly under my back truck seat. Side note, 9,000 views and 285 thumbs up so far? Come on, we all know this man is putting out some of the best tool reviews. Perfect blend of real world info and a unique blend of comedy. Let’s get him some more recognition, it’s mutually beneficial.
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Cheers man
@daz7038
9 ай бұрын
DMP181Z I am absolutely baffled by the design of this tyre inflator. 1. You set the target limit, but then have to bend down to hold in the trigger to make the pump work. I bought it to save my back and it doesn’t do that. 2. Why is there no auto shut off? What is the point setting the target pressure? The pump will also continue pumping if you hold the button in past the target pressure. 3. There is a bracket for a valve I’ll never use hanging on the end of the inflator tube which makes it very awkward to attach. Why isn’t it stored elsewhere? 4. The tube has a straight valve connector that loses pressure as you unscrew it and is also nigh on impossible to get it on to a motorcycle front wheel valve. Valve needs to be right angled and quick release.
@SammyInnit
2 жыл бұрын
Given the fact they've done a redesign and kept that stupid fking trigger switch is astounding. Milwaukee did one once and did it right. Set and forget.
@shanew7361
2 жыл бұрын
True story
@wesseallik9991
11 ай бұрын
DMP181Z is better then DMP180Z but the price difference is almost 2X times (115 euros vs. 60 euros). Same time, they are both home use only devices - for random flat ball or tire and that's it. You're not going to use them at air tools at the worksite, or in carshop etc. The thing, that 181 is a little bit faster, don't really matter in this case ... you going to use that anyway few times a year max and if you need a device for everyday use, you're going to get real tool, with tank and decent pump.
@jamescrawshaw71
7 ай бұрын
screw on one is annoying! Just picked one of these up and can't understand why they've put a screw on it, it lets about1-2psi out of a bike or motorbike tyre when removing. Probably less on a car/truck!
@mediocreman2
2 жыл бұрын
Wait, what is the point of the auto shutoff if you have to hold it? The entire point of auto shutoff is to increase safety and convenience. It actually can be dangerous to sit next to the tire while it's inflating. Even my much cheaper Ryobi has this feature.
@cg.4836
2 жыл бұрын
I’m at a loss as to why makita doesn’t make a proper LXT or XGT cordless air compressor. Seems like they could just strap one or two of these to a 5 or 10 litre tank. And call it a day.
@rickclink9196
Жыл бұрын
My god. I’m a Makita user and wondering why you have to keep the trigger depressed? Lost me.
@sixtyfiveford
2 жыл бұрын
Still in my opinion a little bit small for filling anything other than a small car tire. I run a cheap12-volt clamp on car battery one that'll put out 42 LPM/1.47 CFM (Makita dmp181z 23LPM/.81CFM) and I feel like that is slow sometimes.
@LilasTools
2 жыл бұрын
Excellent review as always, the new 181 is a hug improvement still a shame no trigger lock though. I don’t own a inflator yet, so If I see the old model on clearance I’ll probably pick it up! Cheers
@ML-sj8ti
2 жыл бұрын
Is a tear down in the planning? I would love to see the internal differences and what they’ve need all that extra space for!
@ToolsAndStuffOFFICIAL
2 жыл бұрын
I hadn't planned to... but you never know...
@chriswesney
2 жыл бұрын
The fact that makita didn't make a trigger hold is insane! Dewalt and Milwaukee both have the feature that let you set them and walk away.
@Aladinscave
2 жыл бұрын
Didn’t find this to be a issue for me 🤷🏻♂️ it’s a safety thing, if you are planning on inflating a giant wheel witch this is not designed for then it will be annoying sitting there for a long time, it inflated my motorcycle wheel in a very reasonable time.
@forrestn4988
2 жыл бұрын
@@Aladinscave Unnecessary "safety thing".... you set the psi on the control screen and it shuts off even if you are holding trigger.. what a wast of time ....
@LemonySnicket-EUC
2 жыл бұрын
Stop crying . it's simple to make your own. it's a 10min maximum on 5 off though so it is a safety issue to not have one. . Just deal with it.
@LemonySnicket-EUC
2 жыл бұрын
@@Aladinscave 💯%
@deeeeeeps
2 жыл бұрын
I have to hold the inflator when I use my big compressor ..what is the difference.
@John-eq8cu
Жыл бұрын
Wow 22 LPM, that's not much, the same as cheap $25 inflators. I would expect it to have more tlike 60 LPM. Thanks for the review, you helped me decide NOT to get the 181.
@markthespark6240
2 жыл бұрын
I'll stick to the DMP180Z - The angled valve connector is perfect for kids motorbikes and tight places.
@huguesdollie6239
Жыл бұрын
why Makita has not a trigger hold : incredible. I have Makita platform but I won't buy a Makita inflator till this issue is solved ! strange from Makita Cie , they don't read the comments ???
@kevinmunz
2 жыл бұрын
Really wish they would add a powerful cooling fan to these small inflators. They get so hot and don't use much power, so I don't see any downside.
@holton345
11 ай бұрын
I loved my old 12V Makita but sold it to a friend when I got this new one. It is a LOT better. BUT WHY NO TRIGGER LOCK, MAKITA?
@neoduan7982
20 сағат бұрын
I have just bought a Makita 181z inflator. It stops automatically when reaching the pre-setup pressure while pumps up a soccer ball. However, it won't stop by itself when I use it to inflate a car tyre. Is it normal? Thanks.
@karenstein8261
2 жыл бұрын
Lovely - and I just bought the 180 for my car. Smaller is better when you have limited cargo space. I’m no about to time myself though. What’s the time when you need to, say, get a tire up to 32PSI after it leaks down to 20PSI? Just what I’d need to get my car to a shop ... Battery voltage? Keep it the same as your impact wrench and you need carry but one battery.
@hobbes3
10 ай бұрын
That's exactly what I did. Got my 18V 1/2" impact wrench with a 21mm deep socket, a Harbor Freight torque adapter, a 15" breaker bar, and this 18V inflator and I'm good to go for all tire changes lol.
@maff5535
2 жыл бұрын
For pressure testing heating systems I bought the smaller 18v before there was any news of the bigger one. Its hard not to feel scammed because I would've certainly bought the bigger one. The smaller one kind of struggles with bigger systems.
@joeljandoc750
2 жыл бұрын
Do you think the 18v is good for pressure testing gas line?
@chrisE815
Жыл бұрын
Hmm what systems are you testing? Isn't nitrogen usually used for that sort of thing?
@maff5535
Жыл бұрын
I have just used Air to pressure test heating systems before filling them
@joeljandoc750
Жыл бұрын
I usually pressure test main gas line to my manifold and all the appliances. It's usually 2" hard pipe. Do you think the older 18v will do the job? I hate lugging around an actual air compressor
@oraniyan
2 жыл бұрын
I use DMP180 mostly to inflate mtb tires. The valve connector and the auxiliary adapters are like straight from 1981, not 2021. I really wish it had a valve connector that can handle both Presta and Schrader valves. Why not, there are floor pumps and pressure gauges with such connectors. And for my preference it should be quick connect type. Tyre pressure check is my daily routine (especially tubeless mtb tires often lose pressure). It is too slow and cumbersome with the connector that accompanies DMP180 for Presta valves. But I think all in all it would be the best if the hose had a connector onto which you can screw any kind of end, and then of course Makita would provide a sufficient variety of different connectors. - I like the improved display and deflate button on the newer model. I would like to be able to calibrate the pressure gauge. I have three gauges that give same readings between them. Makita's values differ slightly, by 1-2 PSI.
@hereticus1994
2 жыл бұрын
I’ve got the 181, and I’ve got it set up with a prestacycle big head inflator for my mtb and roadie and quick clip right angle schrader head for the bmx. Works like a charm and saves so much time topping off the many many bikes in our house. From the reviews the 181 is a bit faster too apparently.
@scottspropertyservices6877
2 жыл бұрын
@@hereticus1994 never seen or heard of the prestacycle range before. Just googled it. It’s a game changer for these inflators, thank you very much!!!
@calumward1192
Жыл бұрын
People really be mad about it having no trigger lock 😆
@bcgunner9324
Жыл бұрын
Thanks for this video. I got the smaller one from my local home depot to bring my truck tires up from sand pressure, back to street-safe (12 to 25) and it was just too slow for the task. Seeing how the 181 is almost twice as fast, I think it will do nicely. I love having one battery system for all my tools... Makita is the best.
@ryanassenberg3138
2 жыл бұрын
I prefer the new screw type attachment better, prevents damage if tyre it flat and u are pushing the valve back.
@bamagolds
4 күн бұрын
If only for your vehicle, may be better off with a DC plug in. They're less expensive and more powerful. These models come in handy to inflate things away from vehicle (lawn mower tire, balls), which is why I'm here. I wouldn't consider if I didn't already have Makita batteries and charger. If on the highway a lot, a backup is never a bad idea. I always keep an 1/2" Makita impact drill and sockets for raising jack and lug nuts. In a sticky situation, speed is everything.
@winchesternathan
Жыл бұрын
Thank you for the review. That helped. I have already "standardized" on the Makita batteries and have 2 Makita drills, a hedge trimmer, a 36V blower (that uses 2 18V batteries at a time) and a string weed trimmer, so I was already leaning towards a Makita air compressor, but this sealed it. Gonna purchase the Makita DMP181ZX 18V LXT. Sorry about your rugby ball!
@maximusprimus827
2 жыл бұрын
Had no choice but to buy the DMP since I am already invested in the Makita platform. It sucks that there is no trigger lock 🤦♂️
@swilson317
2 жыл бұрын
"Make sure you lube up your needle before you jam it in your ball." LOL! Good advice! My take on the different ends is that the screw-on is easier for car tires...especially if there is tight clearance on a rim. I would prefer the older model with the quick connect. But I would probably use it more for my road bikes than car tires. I wished they had a version of the clamp-on end specifically for presta valves. Great comparison! Thanks!
@robslater4358
3 күн бұрын
would the larger model inflate a pw50 wheel, they are a very small wheel, the petrol station inflator dont fit, the older models work, anyone know if theres an adaptor that can be put on it
@jamilal-yaqubi1986
2 жыл бұрын
Another great video. The simplest thing is that Makita should just sell an adapter that you screw on yo the end that lets you clamp to a valve the way the 180 does. Then you have the best of both worlds. Like you said, a lock on the button is missing, but what I would also like to see is a low pressure, high volume mode for blowing up paddle pools and the like.
@1d1hamby
2 жыл бұрын
I believe he tried to demonstrate that with the 181 on the rugby ball, but there was too much pressure.
@jamilal-yaqubi1986
2 жыл бұрын
@@1d1hamby no, this inflator does not have a low pressure mode. It is the kind of inflator used for air mattresses and paddle pools. I keep a cheap one in the same case as my DMP180, so I have them handy in the same place.
@johnlucier5654
Жыл бұрын
Wonder if the handheld blower would work for that with a reducer on the end.
@odeean
2 жыл бұрын
Screw on = bought. I have the small one and I can't reach behind my backwards truck tyres to attach it. I have been using dewalt.
@jeffn1384
Жыл бұрын
i work for the Responsible and Fair Treatment of Footballs Organisation and we will be in contact with you shortly.
@mattkaplan1316
2 жыл бұрын
I like the screw on better , you don’t have to worry about it slipping or not holding properly works the same every time
@maff5535
2 жыл бұрын
I wish id know the bigger version was coming out before I bought the first 18v inflator. I pressure test heating systems with mine often and I think it struggles.
@pjfaust254
2 жыл бұрын
Fantastic comparison! I would’ve liked to see it with a very large truck tire but this video helped me out. My 180 will do a truck tire from 17 to 35 psi in about 7 minutes. I’m thinking the 181 will be around 4. Thanks again for the comparison
@jm-handyman7878
2 жыл бұрын
They didn't solve the trigger problem?!!! 🤦🏻♂️ Wow!
@nicksgarage2
2 жыл бұрын
Can't wait to get the new one. Not available at Amazon for me in the US yet. I use my LXT one all the time and I'll just leave in my truck tool box. The trigger thing is not a big deal. I just keep a velcro strap on mine. I thought about getting the XGT version but it doesn't seem that there is that much advantage and I don't have any XGT tools yet. And yes, I'll appreciate the screw on connection as I have a lot of tube tires I'm inflating and it's hard to get the clamp on one on some of them.
@andygilbert1877
2 жыл бұрын
I have the 12v version which is great for small car tires and bikes. A nice compact unit. Interesting that the old 18v one is little better than the 12v one though, glad I didn’t wait for that to come out! The new one is usefully more powerful and I’d probably buy that for workshop use, but no need now as I’m retired. :) If the lack of a trigger lock bothers you just set up and trim a zip tie and leave it on. Though I did that 2 years ago and have never used it! I don’t think I’d like the screw on valve connector but if it bothered me I’d change it to quick connect. (Or maybe combined Presta/Schrader)
@tobris3738
Жыл бұрын
Can you use it as a dust blower?
@ToolsAndStuffOFFICIAL
Жыл бұрын
No.
@vitaliybulochnikov9264
Жыл бұрын
Thank you, good review. Can this pump be used on SUP’s?
@urntwrthyZ
2 жыл бұрын
Very thorough, nice work. I much prefer the clamp on style.
@Kukibajker
4 ай бұрын
I prefer quick clip on older one. I'm using it mostly on bicycle tires and kid's balls and the older one is just quick and strong enough for my needs. My car have it's own compressor in it's tire repair set, so I don't need this in my car. I see the new one still missing lock on button with automatic stop function at set pressure.
@AndyChipling
Ай бұрын
Good video thanks. Sad that they did not think to have a lock button. Who wants to wait with their finger on the trigger. 1. it's dangerous to be near the Tyre when it is being inflated, it may have a fault in the Tyre and burst and you are next to it holding the button. 2. it can be painful for some older people to have to crouch down to hold the button for the inflation time. 3. It may be raining and you do not want to be standing in the rain or even in the hot sun during inflation. 4 a cable tie is a smart solution to a daft oversight of design. It does have auto turn off so why not be able to lock it on during inflation! 4 out of 10 Makita for missing that.
@kassandrakimbrell2504
9 ай бұрын
I own both now and have to say the screw on end of the larger one is CRAP. Its nearly impossible to get my hand inside our dually truck rims and turn a screw end..the click on one is not an issue. On all the trailer tires and our work trucks we just use the smaller compressor now because of the ease of the click on end..what a shame. Havent seen anything that the screw on one would work better on as of yet. Not any commercial vehicles or trailers at least..maybe someones little car tire or something. But it should be the opposite the larger compressor designed for bigger stuff!!
@adamhindle9215
9 ай бұрын
a perfect review. All the key info (except noise data), and entertaining to boot. I have the 180 and it's okay but weedy and quite loud, and the trigger thing is a pain, obviously. I use the ziptie mod too.
@UnacceptableViews
2 жыл бұрын
damn.. i knew i should have waited for makita to make a better model.. the original 18v is disappointing. i hate the no lock on trigger and i can't believe they didn't put one on the new 18v.. i love makita tools but they don't listen to their customers very well sometimes.. rant over :P great vid mate cheers for the review. i might be upgrading by the looks of it. most of my vehicles have large tires and i've nearly cooked my poor little pump quite a few times lol
@shin-ishikiri-no
Жыл бұрын
@rudyfromsomewhere3066 They likely considered "it blew up my tyre!!" a bigger PR and marketing risk than us using velcro zip ties.
@56243G
4 ай бұрын
It can still blow something up if the pressure gauge fails... only it blows up in your face because you're sitting there pulling the trigger instead of safely doing something at a distance like the owners of every other brand of inflator.
@Ist_Geheim
2 жыл бұрын
I got my DMP181 a few days ago. What I don't understand is that in the price-class of more than 100 EUR they didn't manage to put the LED straight on. It shines about 10 degrees to the right, at least on the one that I bought. Of course the tool and it's light is absolutely usable, but for that price I would like to get more perfection and/or quality control. The solution that the DMP181 has - to srew it onto the car-velves - is not bad, especially when I remember how many seals on "90°-squeeze-solutions" I have seen broken. However, I immediately upgraded to a "screw-on quick-adapter" (I don't know how they're called in english). A penny-tool if Makita bought them in bulk, I don't understand why they deliver it with the tool (in this price-class!).
@johnlucier5654
2 жыл бұрын
Saw a hack where you can drill a small hole in the handle through the trigger and insert the ball needle to hold it down.
@RealJohnnyDingo
Жыл бұрын
brilliant, even more so because I don't otherwise use the ball needle 🏀 💉 🏀
@RogueEagle
3 ай бұрын
my original got stolen so I upgraded, duty cycle thing is awesome but I miss the quick clamp on.
@Jimmy_Cavallo
2 жыл бұрын
💥 9:57 “I’m going to lube up my balls with some of this 3 in 1 oil”…. 🤣🤣
@MM-qv5lf
10 ай бұрын
It's crazy how fast they inflate the car tire from zero, wow. And that was fun watching the ball explode. 😂
@lutomson3496
7 ай бұрын
ill keep my smaller one i have the 12v also the big one doesnt perform that well compared to other brands and you can buy battery adapters to use makita batteries on better compressers that fit the larger size one envelope
@timothyroper1897
Жыл бұрын
MATE Thankyou for ALL your Makita revews. As a Makita fan I have valued your opinions on the tools/ battries. I have choen with insight when gettting my kit. Your videos are always interesting-thanks again from your UK FAN (my wife needs abit more convincing about how I get carried away with my purchases though)😁
@ToolsAndStuffOFFICIAL
Жыл бұрын
P.S. 20% of my watchers are "UK Fans"
@ryanpkeeton
4 ай бұрын
If you hold the trigger on and it gets to pressure and shuts off does it start pumping again if the pressure drops?
@daig1984
2 жыл бұрын
Trigger gutted 😞 not buying now
@patmat.
2 жыл бұрын
Great review as usual, thank you!
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Cheers
@magiic1701
2 жыл бұрын
Hi Great video - what is the model number of your LCD Makita battery charger you are using? is running 240v or 110v?
@ToolsAndStuffOFFICIAL
2 жыл бұрын
kzitem.info/news/bejne/1quj3Z2bhadpdno
@56243G
4 ай бұрын
They did a redesign and no trigger lock?? Unbelievable!
@tomallen6073
Жыл бұрын
I have the smaller version and like the more compact size. Will probably never use it to fill a large tire from zero, just top them off. I like to keep mine in my truck. It would like to see which one is more efficient, how much can you get from one battery?
@visionsdb6695
Жыл бұрын
How long for a top off?
@yeaheddyman
2 жыл бұрын
The switch not having a lock.on is probably due to the duty cycle no doubt would be too easy to leave on over the stated 10mins
@pflaffik
2 жыл бұрын
Makita tools in general has protection mechanisms, this should have them too. I had to inflate in pretty bad weather on several occasions and waiting 10 minutes inside the car/truck is not a disadvantage. Using the biggest Ryobi now, my tools are Makita but the trigger operation on the Makita was a dealbreaker.
@TKettle
2 жыл бұрын
The pump already has thermal protection. Every time you turn on the pump, you can see the temperature icon. Makita excluding a trigger lock was just a dick move.
@pollyaloy
2 жыл бұрын
I found the 180 to be very accurate
@EunoiaAnrkyuk
5 ай бұрын
The best feature of the new one was that I got the old one for peanuts.
@Test-gb6xx
2 жыл бұрын
I hate the screw on style... I only use it for bike and small car tires... I'm not inflating high pressure truck tires, so I'm really glad I have the older 18volt model. I refuse to buy the screw on crap... what a waste of time...
@Derek-tk4wf
2 жыл бұрын
Whats that Makita battery diagnostic device called at the 9:10 mark? I looked on makitas site and cant find anything close to that.
@ToolsAndStuffOFFICIAL
2 жыл бұрын
kzitem.info/news/bejne/1quj3Z2bhadpdno
@ShaneTheGeek
2 жыл бұрын
Screw on style all day long for me.
@neverputon5878
5 ай бұрын
I have switched to milwaukee tool sets at work and got the inflator its really good . I still use all my makita at home really like my makita tools. I bought the 181 not going to mess with little ones no comparison milwaukee was better in so many ways. First time disappointed with makita besides the battery issue that was the reason to switch at work. I wish I could return 181 I really don't like it.
@luukie0000
6 ай бұрын
The 180 is 60€ now while the 181 is 116€. Don't think it's worth double the money for the few times it'll be used.. Just to be twice as fast.
@NameNaameNameeNaamee
2 жыл бұрын
I sorta hate the clamp on thingy, that said I have the new one here and will send it back. For one, it tends to overfill by a rather large margin (talking car tires here). Also, the screw on connector will result in non exact pressures over all4 wheels since you loos a ton of air while detaching. And that bugs the hell out of me. Finally having the wheels at precisely the same pressure actually was the killer feature for me on the old one and the reason I got that in the first place. For what I do (just refilling a bit) the smaller one just is the better tool, it tucks away nicely under a false boot floor, it's precise and it's affordable...I'll keep that!
@chrisstafford5660
2 жыл бұрын
What a great comprehensive review , well done chief from Ireland .
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Thank you kindly
@photogra4
Жыл бұрын
Thank you for this video! You've made my decision much easier now. BTW, Thats's a good looking Makita charger. I can't seem to find one here in PA (USA) or on a quick google search. Can you tell me what the model number is please? Thanks again
@Aladinscave
2 жыл бұрын
Got the 40v a few days ago and happy to say so far its been really good it inflates motor cycle tyres really quickly for a battery powered pump and the size isn’t really an issue considering it does the job quickly 💪🏻🏁
@speedmaster001
Жыл бұрын
I’m a Makita fan but will not pick this up over the Ridgid with excellent features to include cigarette lighter power adapter, auto engage, ect.
@peterryan7340
2 жыл бұрын
Screw lock for me!
@gezagyorfi
2 жыл бұрын
Is it just me who can`t find the size of the car tyre in the video? I`ve got a (4x4 dual pump) 12V compressor at home with different tyre size inflation times and would like to compare it to the new Makita.
@darrylbuckett5380
2 жыл бұрын
As far as the Schrader valve goes I don't like either as neither will fit onto my wheelbarrows or mulcher wheels, so I have to take the wheels off and trundle up to the servo and fill up there as their schrader valve is offset and double headed so it can come back on itself. This to me is a major flaw that would be simple for Makita to fix, but it pumps up pool toys etc easily. So come on Makita Fix it. Cheers
@MM-qv5lf
10 ай бұрын
Do you have to let go of the trigger when you reach the set pressure or do you keep the trigger squeezed until the machine stops by itself? Assuming it stops by itself right?
@debandmike3380
Жыл бұрын
as an emergency use tool the smaller one is much better. are 10 more seconds a deal-breaker? If you work for a sports team, you would get a more professional machine anyways, so in my opinion there is no room for that larger inflator.
@vinhhoang5397
2 жыл бұрын
Please let me know where to buy the quick connect clamp. Is there any part number for it? THANK YOU!
@mikkomakela3234
2 жыл бұрын
Filling car tires with DMP181 is not as easy as with the DMP180. Why they had to change the head from tratitional...
@sanraki
2 жыл бұрын
I have the older one for mountain bike tires and it kinda sucks. Like with your empty balls I've notices that it can't really deal with starting and measuring low pressures like 5 psi or ~0,3 bar and up. I have to over pressure the tire and then lower it with a pressure gauge which kinda defeats its purpose. For a car tire it's fine.
@HVACGUY
2 жыл бұрын
Much prefer the quick clamp. In some instances it’s difficult to add air with a straight hose: for example reaching behind a hubcap.
@Ist_Geheim
2 жыл бұрын
You can buy an adapter and srew it on. If the seal in adapter breaks from squeezing, you could buy a new adapter and your tool itself is still ok. So I prefer the DMP181 over the DMP180.
@Hours-zi9js
2 жыл бұрын
Great review. I bought the xgt a couple of weeks ago. Can’t wait for it to arrive
@ToolsAndStuffOFFICIAL
2 жыл бұрын
The XGT is very similar to the new LXT, just a little bit quicker. Review soon.
@Hours-zi9js
2 жыл бұрын
Honestly. For what it’ll do for me 35-55 psi… you’re probably right. Maybe the difference would be more noticeable with suv/trucks that have 90 psi tires
@christopherenoch4230
2 жыл бұрын
Loved the opening... Fly fishing NZ is on my bucket list! Dang COVID... Lord willing, I'll make it there someday.
@mannyc805
2 жыл бұрын
Wow I’ll probably just look into dewalt inflators this new one is basically the same as the old model it takes a while to inflate from flat….
@brandonsheaffer5035
9 ай бұрын
The tool not having to be manually operated the entire time is a deal breaker for me
@jaywinters2483
Жыл бұрын
stop tapping on the boxes:....you're gonna wear them out.
@snooka2484
2 жыл бұрын
This is a great mobile tool. I love it. Perfect for road trips and pool floats/balls. I still fire up the compressor if I'm in my garage for the vehicles...it's just way faster.
@cleftoftherock6797
2 жыл бұрын
Very good. I’m sold. The 181 is $62US dollars more that the 180 but definitely seems worth it. Thanks.
@wosd
2 жыл бұрын
I use a cambuckle strap to hold the trigger on. Easy solved.
@smurfx
2 жыл бұрын
dammit i bought the other one not long ago. although i think i'll keep mine since it fits into my tool box and that behemoth will take up too much room.
@colinwilson8747
2 жыл бұрын
Screw on version is not always possible to connect on some motorbike tires. So while the screw on is great can't always use it.
@djjinerson
2 жыл бұрын
Never had a screw down inflator, but I hate the click down style for sure. I want to get this for that reason alone
@jacobhendrickson8935
10 ай бұрын
Why did you scrap that van, I’d so love to have one of those.
@goodtobehandy
2 жыл бұрын
Surprise, no Tom Brady setting .
@ccbowers
2 жыл бұрын
I usually prefer to use a quick connect, but would rather have a threaded connection attached to the tool, and can add on a screw on quick connect. That way it is replaceable if/when it stops working well.
@michaelcostello6991
Жыл бұрын
In would like to see how the British attachment works ?
Пікірлер: 266