First time you've not had a big cross on the screen for a while marcus nice 1
@darrenjones9504
2 жыл бұрын
Perfect explanation of how a relay works. Looks a great piece of kit 👍👍
@jessepeterfenton3973
2 жыл бұрын
Another cool vlog. Happy to See Maud running again. Just needs some tidying😁
@smlfrd
2 жыл бұрын
Motorsport Electronics have recently released the Nodiz Pro GEN-X as well. Very affordable. I've had a nice 711M 1660cc X-Flow built with twin 40's I'll be installing and breaking in with a recurved dizzy then purchasing the GEN-X and getting it dyno tuned I reckon. With the full 3D map I imagine it will be an impressive upgrade from my stock 1600 with a dizzy and a Weber 32DFM
@rjauto7215
2 жыл бұрын
I'm definitely not new Marcus my son I've been around for 55 years lol but love the channel you have both the cars from my younger years luv it .great video as usual son 👍👍👍🙏🙏
@rossmclaren71
2 жыл бұрын
Nice one Marcus 👍still love the sound of your Escort !!
@waynehammerton5698
2 жыл бұрын
Absolutely brilliant once again Marcus you're explanation of the work you do is absolutely 💯% brilliant Marcus
@marcushayesford
2 жыл бұрын
Thanks mate! 👍
@waynehammerton5698
2 жыл бұрын
Anytime Marcus Anytime my good man
@sheldonpearce2365
2 жыл бұрын
Awesome video liked the way u spoke about installing etc the ecu nice 1 bruva 👍🏻👍🏻👍🏻👍🏻
@danielsalero1332
2 жыл бұрын
Very informative 👍
@paulfisher7911
2 жыл бұрын
nice one marcus and the car sure sounds good glad alls going well and nice to see you back in the car using it
@marcushayesford
2 жыл бұрын
👍👍👍
@jason.aldridge5004
2 жыл бұрын
Great info on this Marcus a one of the successful videos I reckon.i gotta you don't mind taking a risk like ME say it's not compatible with ur map but Marcus just loads it lol tbh I'm in cars but clueless about mapping values etc but it paid off wiring I get but awsome content mate
@st220saloonrestorations
2 жыл бұрын
It’s good to see the Mk2 back up and running
@marcushayesford
2 жыл бұрын
👍👍👍
@stephengreatbatch1269
2 жыл бұрын
Great job mate I was lost at the start with all that 😂😂
@robs_rc_cars
2 жыл бұрын
Great video Marcus once again.. think need invest in a new exhaust for maude.. and that wiring needs tidying up and hiding.. car looks OK from outside open the door it's like wow.. tiking time bomb lol.. it'll look better too once finished door card's.. any updates on the project car and little suggestion stick a mondeo st220 engine in it something different if would fit.. anyways # send it 🤪
@CarlCostelloPlays
2 жыл бұрын
Nice 🙂👍
@andy_v4443
2 жыл бұрын
👍👍 sounds nice 👍👍
@laserracer6
2 жыл бұрын
Hi Marcus Dave here from New Zealand...any chance of you doing any track days ?
@markstorer7204
2 жыл бұрын
Great upgrade Marcus..... hope Maude continues to run well.......BUT PLEASE......sort that chrome petrol cap...... I'm Autistic and it really does my head in 🙏🙏🙏
@marcushayesford
2 жыл бұрын
Defo need to paint the chrome fuel cap! 😀
@markstorer7204
2 жыл бұрын
@@marcushayesford Please 🙏🙏🙏🙏its doing my head in 😬😵🤪
@Scotty-UK
2 жыл бұрын
The wiring is more annoying for me, just tidy it up please mate 🙏
@way661
2 жыл бұрын
Great video mate, just a tip rather than cutting the coil cables you could of depinned it with the correct tool, not loads of money and will make it easier
@marcushayesford
2 жыл бұрын
Thanks for the advice mate! 👍 I REALLY should get one of those tools to de-pin multiplugs. 👍
@46M111
2 жыл бұрын
You need to go back to the RR & get the ignition table tuned, its a bit pointless wiring up the TPS & leaving the part throttle values un tuned. same goes for the VVC but that's not so important.
@marcushayesford
2 жыл бұрын
Everything was the same before (including the TPS) and it was tuned on the RR. I only changed the ECU. 👍
@46M111
2 жыл бұрын
@@marcushayesford Ah sorry I miss understood! I thought you meant you didn't have it connected before, that will teach me to comment on things when I've only just woken up 😀
@88pondlife
Жыл бұрын
I would put a brake pedal rubber on before you go out for a spin !
@DJMac
2 жыл бұрын
Have you got a link for the solder connections
@LincolnRobinson
Жыл бұрын
Why would you choose the ME100 over the ME221 now that the 100 covers the VVT? Thinking about one for my stock ST170… not sure I’ll do throttle bodies.
@marcushayesford
Жыл бұрын
If your defo not going to run throttle bodies in the future, the ME100 is the one to get mate. If you have any more questions about your ECU setup, feel free to email me @ marcushayesuk@gmail.com. 👍
@LincolnRobinson
Жыл бұрын
@@marcushayesford Thanks mate
@AshleyBurch
2 жыл бұрын
Still running nodiz base map on mine 🤣 my crank sensor got fried and caused issues, defo need heat wrap on these zetecs.
@coopers4491
2 жыл бұрын
What happened to the last ECU???Great content 👍👍👍👍🇬🇧🇬🇧🇬🇧🇬🇧
@marcushayesford
2 жыл бұрын
It stopped firing on 2 of the cylinders. This video was filmed a while back. 👍
@st220saloonrestorations
2 жыл бұрын
Have you got round to posting the Escort stickers ref Ireland 🇮🇪 campaign
@marcushayesford
2 жыл бұрын
They should be arriving from the manufacturer 2morrow mate and then I’ll be sending them straight out. 😀
@deopersad2915
2 жыл бұрын
😀👍🏽👍🏻🤙🏼
@rdom4256
2 жыл бұрын
You could tether the internet from your mobile to your laptop ;-)
@marcushayesford
2 жыл бұрын
I wasn’t able to do it mate. Poor signal at my garage. 🙁
Пікірлер: 47