Haha sadly I agree.. The hobby must be so ridiculous to those non knife guys out there. I know my wife sure doesn't get it.
@FerociousSniper
Күн бұрын
I like my knives like I like my women; Japanese.
@carlosalvarez-ek9ll
4 жыл бұрын
Alright!!! Alright!!! Alright!!!
@oserratos
3 жыл бұрын
Alright...
@devatwell334
3 жыл бұрын
Take it apart lubes up the brass washers and put it together with loctite itl fling out
@shelbyGT40
3 жыл бұрын
Alight? Alright! Alright.......alright
@robertbates8599
4 жыл бұрын
YOU ROCK BOSS!!!!! BY FAR THE BEST OF THE BEST THAT HAS THEIR OWN CHANNEL!!! Have a great weekend my brother! Bob
@toolboss8410
4 жыл бұрын
👌👌👍🙏🙏 You to buddy .. God Bless
@teddybeardesigns
4 жыл бұрын
The other "thing" by the lanyard looks like it's so you can swap the belt clip.
@jvbfirst
4 жыл бұрын
The safety eye logo is a recommendation to wear safety glasses. The small screwdriver has the same eye logo
@lonedesertfox
4 жыл бұрын
Looks like a gas station knife
@meme5887
2 жыл бұрын
Milwaukee needs to fix this "fast" issue. I just bought a hawkbill yesterday and omg is it a lawsuit waiting to happen. Someone is going to try to force flip it, slip out their hands, and stab someone. Why is it only the box cutter that's actually fast? I even tried to loosen the screw on mine as a test. Not much difference.
@robroberts1473
4 жыл бұрын
Looks to have liners as well made for some hard use.
@anthonylau3065
4 жыл бұрын
It's on my christmas list. I usually pop open my knife by pinching the knife blade where the open eye is at. I have an old Buck that makes this easy to do, a habit I picked up in my Navy days. Of course not every knife allows me to do this. I'm not sure if there's enough blade poking out of the handle for me to do the same.
@johnargumaniz9179
4 жыл бұрын
I recommend the hardline 3” serrated. I’ve had it for months now and have only sharpened once and it wasn’t really necessary just didn’t want it to get too dull and be hard to sharped due to the D2
@stevennihipali3607
4 жыл бұрын
do people not know the real term of a standard or phillips head? Good geese... slotted or flat head? star or multipoint head? I swear... I learned that crap as a kid, yet people on youtube can't name the correct tool
@donniemiller4739
4 жыл бұрын
I think it has something to do with where you grew up, it's like here in KY we say pop and in GA they say soda.
@TGH1966
4 жыл бұрын
Donnie Miller No it’s Coke in GA 😀
@raidersperez1278
Жыл бұрын
Damn I wish I could’ve seen this before buying. This doesn’t fling open like the regular one does. I hope over time it will eventually or else I’m not even gonna Cary it.
@toolboss8410
Жыл бұрын
Yea i wish they had 2 models .. one like this in video and one that flicks
@gustavomacall4949
4 жыл бұрын
I'm still waiting on this knife, got the camo a while back but this one hasn't come up yet at my homedepot.
@matiasiriscapello6310
Жыл бұрын
i wish instead of 1/4 in nut driver it was 5/16 since im a plumber i use 5/16 way more BUT i get why they did 1/4 because its more common for everyone. i just carry a 5/16 nut driver on my tool pouch that i can insert in a pinch. love this knife
@FerociousSniper
Күн бұрын
Smart! I've noticed as a home DIYer that 5/16 is very common. I'll have to make sure to keep 5/16 nut driver on hand.
@stevenhenderson4480
4 жыл бұрын
Had this knife for a little over a month, love this thing and always have it with me. Use it several times per day.
@MyBigThing2010
4 жыл бұрын
Wish they'd make this with the razor option.....i have real knives when i want to carry a knife.... but when I'm working I need a razor or i have my fixed blade
@chaddrews6810
4 жыл бұрын
Alright......
@knifenut3479
Жыл бұрын
I bought one today
@AntonioClaudioMichael
4 жыл бұрын
Good video as always @Tool Boss
@AntonioClaudioMichael
4 жыл бұрын
Nice 5 in 1 @Tool Boss
@bluemantom77
4 жыл бұрын
I knew about the milwaukee knife but like you forget about it to I seen a post on IG from Audubon Dan that I remembered seeing it some time ago it's a cool looking knife I carry my fastback that you know I own everywhere but I am looking to get a new knife so I might get one of these
@chipshot4426
4 жыл бұрын
Nice knife Boss, I will have to get one, you are the man!!!!! I have 20 knives soon to have 21 LOL, Might need some WD 40 to loosen up the blade for easy swing out.
@amgj74
4 жыл бұрын
It should break in. I like the knife. Wouldn't mind if they made one similar with a metal cover instead of plastic. What do you think?
@jamesfair9751
4 жыл бұрын
Screwdriver will work in a pinch and handy to have on you at all times but I sure wouldn’t want to use it on a lot of fasteners. Would be awkward using long term and not get a lot of torque out of it.
@AT1754
3 жыл бұрын
Has this loosened up? Got mine and it’s not flipping. Have to do it manually
@305dade8a
4 жыл бұрын
Kershaw did it back in the day this one is way nicer though
@iaretight
4 жыл бұрын
Yup holds 4 bits total and full blade no serrations
@markpletcher6257
4 жыл бұрын
Can I buy TOOL BOSS decals anywhere? I'd like one for my tool box.
@teamhonzilla
4 жыл бұрын
Love carry my Benchmade knife I find myself using it all the time including a flashlight this Milwaukee not bad at all 👍
@jugajones
2 жыл бұрын
Any recommendations for a belt loop carry case for this knife.
@johnrice9121
4 жыл бұрын
I am picking one up next trip to homedepot or online
@konamanstudio2447
4 жыл бұрын
🍻🍺
@johnrice9121
4 жыл бұрын
@@konamanstudio2447 🍻 back at you brother
@changbaowang5103
4 жыл бұрын
Who can mail a handful from the United States to China?
@JohnnyJuke
3 жыл бұрын
Alright!
@adamhayes9203
4 жыл бұрын
Great review as always. The tool is a POS.
@majesticdetail3422
4 жыл бұрын
Put my order in just now. Love my Milwaukee knives.
@jamesfair9751
4 жыл бұрын
Loosen that top screw just an 1/8 of a turn and it should get easier to open. I wouldn’t go more than probably half a turn max the blade might start to get slop if you loosen much more.
@jamesfair9751
4 жыл бұрын
Also I notice this one doesn’t say anything about being spring assisted opening like the other Milwaukee and several other brands.
@theavgjoe5485
3 жыл бұрын
I just picked this knife up it’s really tough to open did you have any luck overtime with a easing up or no?
@toolboss8410
3 жыл бұрын
Yea it becomes much easier over time
@donniemiller4739
4 жыл бұрын
Come back in a month and tell us how good it keeps it's edge , looks pretty cool but I have a older casexx about the size of my pinky, can't tell it's in my pocket,lol
@brianf9619
4 жыл бұрын
Those knives use garbage steel for the blade , but alot of people don't know any better, I bet it's not sharp now , if they don't tell you what steel the blade is made of , its definitely garbage and if it says "stainless steel " or "surgical steel", it also trash , those aren't even blade steels ....
@igarcia6365
4 жыл бұрын
Thanks for making this video!
@wolffo999
4 жыл бұрын
good vid - spray paint it !
@konamanstudio2447
4 жыл бұрын
🍕🍻🍺
@PakkerX17
3 жыл бұрын
Thanks for the review thinking of grabbing this one or spring assisted wish the spring assisted came with the screw driver
@toolboss8410
3 жыл бұрын
👍👍👍
@joseacosta2445
4 жыл бұрын
ESTA 💪👌👍
@loloc7664
4 жыл бұрын
Dope
@eugenew4665
4 жыл бұрын
First
@Fee.1
4 жыл бұрын
I’m more interested in a really nice knife. Any suggestions? Like a high quality one? Not really sure what to look for as far as blade quality. I want to be able to splice atoms. I like the spring loaded type
@brianf9619
4 жыл бұрын
If you want a "Real Knife " and not 1 of these Gimmicks , 1 with a quality steel blade and made of high end materials, your gonna to Pay for it , $100 , $200 , $300 ?? I've been Collecting Knives for years , l would suggest trying Spyderco or Benchmade or Cold Steel. Go online to BladeHQ , Knife Center , or Smokey Mountain Knife Works (SMKW) find something you like and go to KZitem and watch a couple of videos on it before you buy it , or just check out some knife videos , there is a ton of Knife Channels out there with alot of great information on knives , blade steels , handle material and sharpening stuff. So I would definitely do that first before spending your money on some junk your Not going to be happy with....Good Luck ....👍⚔🖖
@kobelcofan
4 жыл бұрын
Victornox and leatherman are very good
@joweat3460
4 жыл бұрын
Buy a Case knife either the carbon or stainless steel. If you take care of it, a great grandchild can use. In my opinion, Case makes the very best knives.
@f.t.4595
4 жыл бұрын
Νιcε
@mrgreen3109
4 жыл бұрын
Hey tool boss you going to watch ufc 253 tomorrow night??? If you are who do you think will win for the main event? Thanks 🤙
@toolboss8410
4 жыл бұрын
I may do a video tommorow on MMA Boss
@mrgreen3109
4 жыл бұрын
Awesome if you do I would definitely watch it.
@toolboss8410
4 жыл бұрын
@@mrgreen3109 👌👌👌👌👍
@richardstevens5961
4 жыл бұрын
Mrgreen 310 There seems to be a lot of legit hatred between them but I see Israel A for the W. He’ll have to keep Costa at range with leg kicks and jabs cause he won’t wanna be on the end of Costa’s punching power. Either close to him where Costa can’t extend his punches or out of reach. It’s gotta be better than last weeks snooze fest of a main event between Woodley and Covington. In my opinion that fight sucked. Enjoy..!!!
@cdfontes
4 жыл бұрын
8GB Ram?
@toolboss8410
4 жыл бұрын
16gb
@JJ-lu6mg
4 жыл бұрын
Crescent makes a new knife with D2 steel TRZ reviewed it.
@brianf9619
4 жыл бұрын
Be Careful , they made 2 versions of that knife , the 1 with the aluminum scales has D2 steel and the 1 with the composite scales has a shitty 5CR13MOV Chinese steel blade which is garbage, that steel is usually used to make the steel handle or pocket clip not the blade ....
@JJ-lu6mg
4 жыл бұрын
@ Brian F I didn’t realize they used 2 different steels on that knife, but one with the D2 is still a Chinese D2 not the better 🇺🇸 made D2 that are use in some custom knives here in 🇺🇸...
@JJ-lu6mg
4 жыл бұрын
@ Brian F Thx for the heads up. Do you collect knives?
@brianf9619
4 жыл бұрын
@@JJ-lu6mg -- Yeah , I've been collecting knives for years , I probably have around 100 or so ...
@JJ-lu6mg
4 жыл бұрын
@ Brian F Thats awesome I’ve have been collecting knives for long time now to, but I sold my collection twice and now. But I’m back collecting again if you ever have anything you want to sell let me know I usually buy a knife about once a week or every other week depending on what I’m looking for.
@lebronjameslol3521
4 жыл бұрын
Well I do not have a knife in my cup holder. I think that is a very good idea and a perfect excuse to buy a new 5 in 1
@dutchynehtam
4 жыл бұрын
I have this same knife. It’s all good but the bit they include is so damn cheap. It feel out and I lost it. So need to replace it with better quality one.
@changbaowang5103
4 жыл бұрын
I received this one a long time ago because it is made in China
@SyndiGlo
4 жыл бұрын
Hey Boss, completely unreleased but I’m a drywall hanger. Winter is coming soon enough and I wanted to ask what gloves would you recommend to be able to handle screws the best.
@toolboss8410
4 жыл бұрын
I like iron clad gloves .. they have a lot of different models
Пікірлер: 93