I’m an electrician by trade... I’ve been using my M12 surge for a week now and it is the perfect tool bag driver!!!
@seansmythe7543
4 жыл бұрын
Electrician aswell. I have the M18 surge and am considering the M12 surge becuase of how compact and light it is. M18 3.0 high output battery lasts me 2 weeks on avg without a charge. M12 just seems perfect
@RFgameingQW3
4 ай бұрын
I have been using the M18 surge hex driver for automotive work for a while and I just went to the M12 surge for my automotive work and it is perfect for fasteners on cars. I’ve only pulled out my M18 for bigger bolts, like rebar and it’s been doing perfect! The M12 is so much nicer and lightweight. I am able to do my fasteners a lot quicker with the M12 than the M18
@WorkingViews
2 жыл бұрын
i just got my first m12s. I really appreciate the quiet operation. The hydralics also make it smoother feeling. Definitely great for delicate work. Still very capable of handling the big screws.
@RFgameingQW3
4 ай бұрын
Agreed and it’s been perfect for me with automotive fasteners. the smoothness is perfect to where I am not slipping off and damaging other shit
@michaelprosperity3420
2 жыл бұрын
I just purchased a M12 Fuel combo drill and driver with batteries and charger from Northern Tool. It was on sale for $179.00 I signed up for a Northern Tool credit card and the knocked off $80. The M12 is replacing my old M12 drill driver thats 20+ years old. These are my go to tools for assembly work from light fixtures to appliances. When I need heavy duty I go to my Rigid 18V. Rigids lifetime battery guarantee can't be beat.
@anthonyflores4862
4 жыл бұрын
As an electrical craft helper assisting our journey man lineman... I use this with a socket adapter to wreck out poles, arms, kerneys, and even take out some pole steps with a pig tail adapter connected to the socket adapter. I'm the only helper in my yard that has his own gun, so when all rattle guns are being used, I'm on the ground with mines taking things apart while the other guy is trying to even locate a crescent wrench. I've had guys ask to borrow my gun in the field 😊... When it comes to being efficient... This little bad boy does the job. Thank's Vinny, it was your review that helped me make the purchase. Had it since christmas and I love it. Just purchased the m12 right angle impact ratchet wrench. I'm sure the brothers are going to get a kick out of it and I'll be so far in the race that to see second place... You'll have to have binoculars.😎👊😎
@goinhot9133
5 жыл бұрын
I agree with the multi volt charger, you’d then be more inclined to buy the 18v line
@h4mmy753
5 жыл бұрын
Yep. Bought the 18v line and it came with multi volt. Makes me wanna buy the 12v line haha.
@AlexWhittemore
4 жыл бұрын
@@h4mmy753 This. I bought a bunch of M18 gear knowing that's what I wanted to replace my low-end garbage. I also bought an M12 kit for the light duty, want-a-light-tool work. Now I'm just annoyed I have an M12 charger taking up space, when what I want is a second combo charger - either system any place.
@billhill3526
3 жыл бұрын
I already have four of each
@jnieveslocobanana
5 жыл бұрын
I have been thinking the same thing about the charger' it would allow us who are limited on funds to obtain the m18 line. Thank you for reemphasizing this point
@syd_luna
3 жыл бұрын
Bought this back in June 2020, and some thoughts after more than 6 months. Within a week after purchasing, I dropped it in 2 inches of water inside a garden centre that was flooded on a service call. The driver still works after being immersed in water. Dried it out completely over a weekend, and still runs fine to this day. Much more quieter than my M18 compact brushless (non-Fuel) impact driver, and given my line of work, much more appreciated in terms of reduced noise in areas where there are other people nearby, which is perfect for service calls. Sure, it's not as powerful as my M18, but it is now my workhorse, and so much more compact in design than my M18, as a 2.0 Ah or 3.0 Ah compact battery wouldn't be in the way, especially if I'm working in tight spaces. Love the M12 Surge!
@CB-ld8no
5 жыл бұрын
M18 Surge user. I like the front silicon protective boot compare to my other drivers. It does not echo through a neighborhood when working outside in the early morning like my other drivers. I remove all belt clips from my M18 Fuel drivers/drills since clip located near battery make it wider . M12 clip in better location compared to M18. Works driving large lags (I always predrill to prevent cracking wood). Works well on small screws if careful. But I normally switch to a cordless screwdriver to not damage hardware.
@seansmythe7543
5 жыл бұрын
Same here. I like the silicon, but it just fills with dust that cakes on so it becomes hard to clean underneath
@Alexpalanik
4 жыл бұрын
I'm a DeWalt fanboy that has just today order 2 Milwaukee M12 tools, the charger would be like a gateway drug
@rkelly5803
5 жыл бұрын
I completely agree with the multi volt charger idea. I'm usually a Ridgid guy but just picked up a deal on two m12 deals and like you said it could make a switch to all Milwaukee a little easier.
@TheTyrial86
5 жыл бұрын
Yeah man you got a point there on the charger. I am a mechanic at a plant that makes corrugated board for boxes. And I prefer the m12 for various reasons. But I would be more willing to break into the m18 line if they included that charger. The funny thing is, they included that charger with their string trimmer...
@MetrologyEngineer
2 жыл бұрын
7:20 I also like the 2.0Ah batteries for their compactness, but I also agree about liking to force yourself to set the tool down because it also stops you from snapping off your drill bit or rounding off the corners of your driver bit.
@protokid1516
5 жыл бұрын
I would honestly love to see this tool tested against the standard m12 fuel impact driver.
@DCas310
4 жыл бұрын
Guy Cicinia that’s the video I’ve been looking for
@portsac
4 жыл бұрын
@@DCas310 same
@jessedelgadillo2960
4 жыл бұрын
I think the standard M12 has more torque and is cheaper. I'm disappointed with the M12 surge. I could have gotten an impact and a drill for less.
@WeldingForJesus
4 жыл бұрын
@@jessedelgadillo2960 I looked at an M12 fuel hammer drill & impact driver powerpack recently. The Surge impact driver version cost 100 Norwegian Kroner (~10 USD) more than the standard fuel one (all else in the pack being the same). My guess is that even Milwaukee realized few people pay more money for a tool with lower specs....
@DrFearCo
4 жыл бұрын
@@jessedelgadillo2960 You are missing the point of the surge. It is most definitely going to have less torque and it is most definitely going to be more expensive. The benefits are longer sustained torque and quieter operation.
@getnautical9579
2 сағат бұрын
Just got mine. Love it. Only complaint is wish it had the triple lights like the standard m12 fuel impact
@michaelwalker74
5 жыл бұрын
Yes I like the idea of having a multi charger with the M12
@johnclark3067
5 жыл бұрын
Speaking of Milwaukee chargers, my favorite is the 12 volt car charger supporting both 12 and 18 volt batteries. I may hardwire it into the fuse box some day.
@henryjk9419
5 жыл бұрын
i found mine yesterday in a store up on the shelf, love it so far, was going back and forth with that and my m18 surge to compare, so far seems to get better battery life on an 18v 2.0 than the 12v 2.0, grip is obviously a bit larger to fit the m12 battery, but i like the overall balance and weight better on the m12 surge
@aaronrepper7649
5 жыл бұрын
I have gen 3 M18 impact it's awesome, my buddy had the M18 surge I used it it was very good, so this new M12 surge will be high on my list.
@aaronrepper7649
4 жыл бұрын
@@jaredtandle2596 battery life is good on m12 no issues
@f8lfrogman
5 жыл бұрын
Size of the grip is great... Those who complain about it, must be used to having a smaller tool in their hand 😎😂
@LJones-zg6px
4 жыл бұрын
Fits my hands perfectly
@aprilialover125
Жыл бұрын
Hahah
@arielamarante5240
5 жыл бұрын
Is this a sign of things to come today! oh yea. Makes sense that milwaukee should make only dual chargers. My m18 charger has allowed me to move into the m12 line more comfortably because i already had a charger. If i only started with a m12 charger only, i would likely not go to m18 so easily.
@freedomranch6094
3 жыл бұрын
Screw test sold me for electrical work and delicate work
@jesseallen4184
5 жыл бұрын
Cool video. I agree about putting the rapid charger in the M12 kits. I got the rapid charger in my M18 drill and impact brushless kit. I never planned on buying any M12 tools but only a week later I had brought two M12 tools. I know own more M12 tools than I do M18 and I originally only wanted M18 haha. I was shocked when I opened my first M12 purchase and saw how small those 2.0ah batteries are. So lightweight, love it.
@TheMcdrewb
5 жыл бұрын
Great point with the charger....I thought that same thing when I opened the box
@CrimFerret
5 жыл бұрын
They should include a dual charger for sure. First off, it wouldn't cost them almost nothing. Secondly, it would make it that much more likely that somebody using the 12 volt system would maybe consider an 18 volt tool if they needed something a little heavier duty for a given task. Basically, give away the charger and make it up on the batteries.
@ReynierMartinez
3 жыл бұрын
You guys are awesome... Haven't finished watching the video yet but I was looking at the max torque of the surge and I was like "what!?!" so I searched for it and found your video. Your videos are very energetic and fun to watch. And I always know there is going to be a good practical tool test from you guys :D
@bluestreaker249
5 жыл бұрын
Oh yea definitely agree the dual charger should come with all combo kits. If it wasn't for an m18 kit I bought with the dual charger, I probably wouldn't have felt so inclined to buy the m12 tools that I have now including this tool.(Great tool by the way)
@MetrologyEngineer
2 жыл бұрын
There’s nothing better than M12 for going up on a ladder and or working at a weird position above your head.
@wallaceryan77
5 жыл бұрын
Didn't know where you were going with the battery charger, but definitely makes sense. Let's go Milwaukee
@MrBigblock78
5 жыл бұрын
I have about ten M12 tools and not once have I thought "I wish this grip was thinner". In fact, because the tool is so small it kind of feels easier to control with a bigger grip. Don't mind the M18 grips either bit I do feel like the M12 tools fatigue my hand less. Not sure if that is because of the tool being smaller and lighter or because of the thicker grip/handle. What I hate about most of the pistol type tools from Milwaukee is the sharp area in the casing surrounding the trigger. Edges are sharp, and the two sides of the moulding don't line up all that well in that area. On all those types of Milwaukee tools of mine I have trimmed and filled that area.
@johnclark3067
5 жыл бұрын
Got mine yesterday thanks to your last video on this tool. Helps to have the Home Depot app also. Awesome tool! Very quiet.
@VCGConstruction
5 жыл бұрын
Nice John!
@petethehandyman9185
5 жыл бұрын
Thanks for the demo,looking forward to seeing the installation driver!
@VCGConstruction
5 жыл бұрын
Thanks Pete!
@rayfujimori9833
Жыл бұрын
I replaced the impact bit case in place of the charger. Have 3 batteries to start of the week, installing blinds. Recharging at the end of the day. When needed. Never used more than one per day.
@highjix
5 жыл бұрын
I will say this. I own an impact drill and a drill set I bought from Milwaukee that has the charger that does both types of their batteries and because of that I am more likely to buy more of their products like you said, so yes I myself can see how that would "trap" you into their ecosystem.
@kimnimbus1291
5 жыл бұрын
I just got 2 for my brothers! Thanks again for the info and videos 👍🙏♥️
@VCGConstruction
5 жыл бұрын
Nice Kim! Thank you
@JimLBon
7 ай бұрын
I’ve been wanting a lighter weight and duty m12 platform driver. This is it.
@nmancini
5 жыл бұрын
Bro just noticed you guys got over 100k subs. Congratulations to the whole VCG crew
@danielmohaupt3487
5 жыл бұрын
Just picked one up from Home Depot yesterday with 10% off
@peytonschmidt1116
2 жыл бұрын
Have had this tool for over a year now, have the 6Ah battery for it. Last forever and has enough power for what I need it for.
@caps741
5 жыл бұрын
The charger idea is a pretty good one. They could do more combo options where it's only a tool and 1 battery and no charger. $200 for a tool and 1 5.0Ah battery is a good deal. If the price was the same as the bare tool and it came with a single small battery like a 2.0, I could see people jumping on it. Great video.
@melsmobileservices4223
5 жыл бұрын
Just makes with 1 charger let's you access both platforms. Awesome idea Vince.....gotta listen to your focus groups Milwaukee!
@mariacarneglia8483
5 жыл бұрын
Good morning guys. Another good video and review! Keep up the good work!🧰🔧🔨😍
@VCGConstruction
5 жыл бұрын
❤️
@ethan7657
4 жыл бұрын
At home Depot right now you get that kit with the 2.0 batteries but you get a free 6 for $200
@JustinDowDIYcentralhighway
5 жыл бұрын
Great Video Brotherman and Nice Film Quality. 👍🍻
@hotstuff53ma
Жыл бұрын
I think that’s a great idea and you’re right people would be more inclined to pick one up I would because I have the meeting if your search already
@ickymurder1
4 жыл бұрын
Thank You for the videos, I'm a fan of Milwaukee and electrician by trade. Much of my purchases were due to me watching these reviews. I love what you are doing. Today I upgraded from my 1st gen m12 fuel impact to the newest m12 surge impact.
@oserratos
3 жыл бұрын
That's what I did. Had the dual charger with my m18 tool kit and bout me a couple m12 tools to add to that. Love them lol
@louiemunoz9840
5 жыл бұрын
Would like to see Milwaukee Surge m12 vs Dewalt 12v xtreme, but by the same operator (maybe timed). Most of the comparisons you do come down to operator error which does not result in an accurate result.
@cmoullasnet
5 жыл бұрын
I do wonder how these will perform in low temperatures and how well the hydralic system will age over time (e.g. leaks, failure).
@saw0o
5 жыл бұрын
You remind me of a stocky John Travolta lol, just found your channel last night. Got me a m18 set with a pack out and charger gen 3 for 250, with two 5.0 batteries. You were the the first reviewer that showed up. Keep up the good work.😁👍
@VCGConstruction
5 жыл бұрын
Staying alive
@MostlyPeacefulCombatVet
5 жыл бұрын
Can't wait to see this thing go up against the m18 surge! Even if it doesn't win, if it's anywhere close it's a homerun in my book just for the size and convenience! Thanks for the Vid cuz
@VCGConstruction
5 жыл бұрын
Thanks David we appreciate you!
@matthewdameron5128
5 жыл бұрын
Vince ive said that about the chargers for a while now but it makes more sense now than it ever did before with the super charger out they now have 4 chargers if they gave you the basic combo with the 12 volt tools and lower 18 stuff then stepped up to the rapid on the higher priced stuff like i got with my power head combo and then the super as a stand alone or maybe thrown into kits for special offers the 12 only chargers are almost not worth having around ive had people offer them to me and turned them down and you are absolutely right that it would be a gateway to moving into 18v tools in the future
@Tyler-gg5id
5 жыл бұрын
Would you be able to do a back to back noise comparison with the m12 Fuel impact driver and the m12 Fuel Surge impact driver? Please and thank you.
@xenonram
5 жыл бұрын
It won't make a difference. You won't be able to hear the actual difference over KZitem.
@seansmythe7543
5 жыл бұрын
I have the M18 surge. In his comparison videos M18 surge vs reg impact, they have a similar DB level but it's soo much less harsh on the ears. I personally will never buy a regular anvil impact... Too much ear rape
@AJ-od7mv
5 жыл бұрын
The Multi-volt charger idea is a winner 👍
@ftlaud911
5 жыл бұрын
Love my m12 gen2 impact. It rivals lower/mid level 18v impacts on power. It is loud though. When I drove my first faster I said wow that is loud. Nice to see they brought the surge to the m12 now.
@dylanmoore5138
3 жыл бұрын
Ya man, the last thing I want is another charger. Mostly because the m12 i feel is more of a home DIYer type line so its not like you go through m12 batteries like TP (at least I don't). If I have 3-4 batteries (which I do) I can get a job done for the day and charge them outside of working time.
@Tumbaburro408
5 жыл бұрын
I bought the m12 kit and I love it and works well doing maintenance work
@jonahkaiguam
4 жыл бұрын
I honest feel if Milwaukee did start including even a M18/M12 standard multi-volt charger in the m12 kits would be better. I have seen a bunch of tool offerings that's an m18 with a free battery....I really wanted to grab it but since I'm only getting started on the m12 line....I dont have a charger for the M18. If there was the standard multi-voltage charger I would have grabbed it no questions asked
@VCGConstruction
4 жыл бұрын
It only makes sense Jonah I don't know why they haven't started doing this already . Even in promotional kits or something during a deal. Thank you for the support and feedback Jonah we appreciate it!
@jonahkaiguam
4 жыл бұрын
@@VCGConstruction Yo Vince can you guys review the new M12 Radio Charger when that comes available?
@Bryan-df7kc
4 жыл бұрын
How about M12 Surge vs. M12 Fuel Gen 2? 🤩 Thanks for all the great content! 👍 Stay safe and God bless you and yours Vince.
@TrueNomadSkies
2 жыл бұрын
I had the regular m12 fuel impact driver until it got stolen yesterday. I used it for basically everything light duty, and my only complaint was that it was uncomfortably loud when working indoors. Not so much for me or other workers cause when you focus on a task and wear ear protection you won't notice anything, but for others in public settings like houses or office buildings or schools, etc. In those situations, I found myself using a drill or hand tools for jobs that I would otherwise want to be doing with my impact to avoid being as disturbing, so now that I'm needing to replace it, I'm considering the surge over what I had. Really wish I could demo it for a while before ordering, but even now nobody seems to have it in house locally, assuming they can even get them at all.
@17shakil
4 жыл бұрын
Honestly i think ur charger idea is absolutely great! I can relate to what u have said. Because of these Milwaukee idea now i have two m12 charger and need to buy separately m18 charger which was completely waste of money!! Where i can use just one! They can completely get rid of m12 charger in my options!
@senilecanuck9402
5 жыл бұрын
I’d like to see a side by side comparison with the 12 volt fuel non surge impact to compare usable torque. They claim the numbers don’t tell the story about what they can do, so let’s see which model is going to get the job done better.
@TheMcdrewb
5 жыл бұрын
Senile Canuck I just did it ...lunch time test!! Way less noise and more power and those 4modes is perfect 👌
@aprilialover125
Жыл бұрын
Vince you da man. Great review. Put in an order immediately
@Fit4FreedomLLC
5 жыл бұрын
The charger idea is perfect!
@MetrologyEngineer
2 жыл бұрын
8:06 I love the belt clips too, but be forewarned they don’t loctite them; I almost lost all the parts to the belt clip on my impact driver when it came off inside an engine bay.
@Mack_Dingo
2 жыл бұрын
Even put rubber bumpers on the side so when you lay it down it protects
@muddybadgers5205
5 жыл бұрын
Love the charger idea. It would also mean they only have to make 3 different chargers instead of 4. They really could just stop making the slow charger as well and put a rapid charger in every kit. It doesn't cost any more to make and they'd be down to two charger offerings
@conqwiztadore2213
4 жыл бұрын
it's ok, to be honest the only difference is the m18 has a heavier battery, but it is a cool addition if you have spare dough
@tinknocker
5 жыл бұрын
Thanks bro, I looked through my box and found mine and signed up thanks bro
@brutisking
5 жыл бұрын
I seen the comparison video from nps 2019 but now it would definitely be cool to see VCG compare it👍👍
@speedster-qe1nj
4 жыл бұрын
I agree with the charger idea I have a lot of the m12 tools and if I had an m18 charger option I would look at the m18 tools. But I won't go out looking for different platform if I cant charge it. I also think they should include it in they're toolboxes because if you buy their toolboxes you probably love their tools it just seemed like common sense.
@denisgiguere1600
4 жыл бұрын
What i like of this tool is the size because i work in the forestry and i need a Cordless tool for unscrewing and screwing bolt of my chainsaw rapidly. Unfortunately, i bought the brushed version and it didnt make 3 days befdore stop working .
@billyhighfill
5 жыл бұрын
The full gusto.ha ha ha. Dude. One of the reasons I watch your videos is how you talk and act. Love it man. Also you got tons of good advice and tool tips.
@danielc787
5 жыл бұрын
M12 Fuel lineup is unreal, I used to think m12 was homeowner lineup, not anymore. Fuel is awesome, infact I use my m12 fuel Hacksaw more than my m18 Sawsall... yeah and the Hacksaw is just as quick if not quicker.
@Sentido-Critico
5 жыл бұрын
Totally agree. As Li-ion came at its time to change the game of cordless tools (Nicad never permformed at all), brushless is here to change the game again, getting more power and durability in a small form factor. So yes, brushless and 12 volts Li Ion batteries is a winner combiantion. What I mean is high power motors suffered amp stress in the brushes, and 12 volts suffered more as they requiered more Amps. The trade off was: less power. It is unbelievable what you can get out of a 12 volt Fuel with the 4 amp battery. In terms of torque, power and WEIGHT.
@tylerp103090
5 жыл бұрын
got it Thursday.. love it! my first m12 tool...
@bendytendy9586
5 жыл бұрын
Curious to know if there is a big sound difference between the m12 surge and the m18 fuel drivers?
@jasonbyarschannel
5 жыл бұрын
I don’t buy dewalt power tools but my dad does. One thing they do that I really like is the one charger will charge all the batteries
@JasonLee-qj8ts
5 жыл бұрын
hit the like button while the Ad was still playing lol
@quietfrog7046
5 жыл бұрын
I just bought the M12 impact kit and I'm still deciding between makita and milwaukee for my 18V kit, might not be that way if I already had the milwaukee charger, I agree!
@Crucifixxated
5 жыл бұрын
@VCG Construction Hi Vince and the V.C. gang. Got mine after seeing your video, home depot showed 4 in stock, was in top stock, just like your vid! Love it, I was using my non surge before as a toolbelt must, and already have the m18. Red dreams really do come true!
@muddybadgers5205
5 жыл бұрын
I agree with you on the M12 2.0 batteries. They're my favorite M12 battery because of their size. I bought M12 tools for their size and the M12 XC batteries kinda defeat that purpose
@kingslayer2
5 жыл бұрын
I have 1 big battery for my M12 impact if I need the power
@CB-ld8no
5 жыл бұрын
The M18/M12 Combo Rapid Charger is slightly heavier and slightly larger. It fits easily in the Milwaukee M12 flat soft case, but Velcro secure strap is too short. Sounds like a good idea to me. I am M18 Fuel dedicated with only M12 Stubby and ratchet.
@jeffreyvelthuis9245
4 жыл бұрын
Would love to see a Makita 12 volt impact driver vs this Milwaukee impact driver.
@Mack.of.all.trades
5 жыл бұрын
You should start an extreme circuit edition. Start with a lug nut, strait into a 2 inch lag, strait into 3, 3 inch screws, strait into 3 foot drop test and finish it with 2 inch hole-saw . Non stop.
@VCGConstruction
5 жыл бұрын
Sounds like a legit test, thanks!!
@lloydfox1007
4 жыл бұрын
Was the battery just not fully charged is that why it could only drive 10 screws before it hit 1 bar? How does the Surge compare to the 2598-22 12 Volt Fuel Drill / Impact Driver
@VictorReyes-rc9xp
4 жыл бұрын
I’m in the m18 line but the compact size of this set interests me because I want something to fit nicely in my tool tote.
@jamesritt5147
5 жыл бұрын
I only buy m12 tools, if it also came with the m18 charger well id have to start buying m18 tools 🤷♂️
@Lkom24
4 жыл бұрын
Just buy any m18 😄 comes with the duel charger, like any of us "needs" more tools but hopefully I'll be happy with my 12v purchase since I use the 18v fuel doing sheet metal and hvac everyday
@leeswatls
2 жыл бұрын
I love my m12 surge
@caribbean_car_culture
5 жыл бұрын
I love it already.... a lot of my tools I have are the ones Vince likes even down to the Dewalt.. but I mostly have Milwaukee..
@jasontaylor9871
Жыл бұрын
My tools live in the truck at night and when the temps are in the single digits my M12 Fuel impacts feel kinda sluggish or quiet until I use it for a few screws What happens with this new divers hydraulic oil when it's cold?
@michigancody467
3 жыл бұрын
Great idea tho in my opinion. I’d buy M18
@leonardhall7203
3 жыл бұрын
Just got this in a combo with the 1/2" hamer drill and a 4.0 battery for $199 from home depot.
@michaelperson3897
3 жыл бұрын
That's how I got on m12. By having the m18 battery charger with m12
@tombarse7252
3 жыл бұрын
How does it work with sheet metal and zip screws or machine screws reassembling appliances?
@KleinGuyJon
5 жыл бұрын
Awesome Video Vince! You know I think they should start implementing a 2-ball bearing collet because it would secure the bit in place a lot better when or if you do some hardcore drilling. That feature from the older impacts was a great benefit in the past.
@jdmtc5
5 жыл бұрын
Can you try the Milwaukee 2402-20 comparison to the m12 surge. Thank you
@Peep18m
5 жыл бұрын
Speed 1 looks great for door hinge screws etc. that thing is quiet I’m buying that instead of m18 surge👍🏼
@69sound81
3 жыл бұрын
Notn only include the dual voltage charger. I think milwaukee should send their Fuel combos or bundles in a Packout box with the charger and batteries. Any Fuel grade consumer has a red shirt on when buying their fuel tools and they will eventually upgrade their tool boxes and bags to the packout system (and if it is an m12 combo kit, also will eventually go for the m18 fuel line up). Like if you agree
@rebellaxbro
4 жыл бұрын
I’ve had the same opinion about the chargers forever, thought no one had the same thought
@spanzek
5 жыл бұрын
Vince, make a video showing a comparison between the new M12 surge and the standard M12 driver that came in the gen 2 kit. Also let’s drive some lag bolts in with the new M12 Surge. I’m still waiting for my Surge from Ohio PT. Keep up the good work and the videos!
@RadToucan
5 жыл бұрын
That's a good grip, but nothing beats the grip of Hilti's 12v tools. I have large hands, and it couldn't feel any better.
Пікірлер: 346