That was a very useful review! Nice to see that it supports a variety of USB C PD voltages.
@lucianprescott8357
Жыл бұрын
I purchased a Ryobi converter for one reason. I care for an individual who uses a power assist chair/recliner. The sub-station blew a transformer and the power went off for 4 hours and the person was in a recliner position with no way of getting the chair to move into an upright power assist. I plugged the chair into the chair and was able to assist the person out of the chair.
@Ricocast69
Жыл бұрын
All tanks to your innovation ryobi is moving ideas tanks so much big fan from Portugal 😊
@jasonbroom7147
Жыл бұрын
Aside from not charging and the unregulated 12v output, that is one of the coolest adapters Ryobi has put out. The unregulated output is especially disappointing because the difference in cost between the buck converter they used and one with regulated 13.8v output is just pennies. 😕
@Pro1er
Жыл бұрын
I've made this same comment numerous times, if Ryobi can save one penny making a product, they will.
@SerendipitySue
Жыл бұрын
It's interesting that the Voltage at 10A remained at 11.4V the whole duration. They must be trying to regulate it. I've seen other powerstations that have this "sag". That's why I prefer they start at 13.8V. I used short heavy gage stranded copper wire for the test. So I don't think it was that.
@MikeJordanUnCamplicated
Жыл бұрын
Thanks for another review that will prevent me from wasting my money. Ryobi should hire you to design things right 😁
@ddelv1601
Жыл бұрын
The review was great! I would like to see them increase the voltage aswell. I was hoping I could use one of these as a battery tender and to run a small trolling motor.
@Beldraen
Жыл бұрын
Great technical information. Thank you.
@grindychum
Жыл бұрын
The unregulated 12v is big letdown. I get the feeling they give us the bare minimum features on new products (the 40v power station - so many flaws) to see if it sells/what people dont like about it, then they come out with a version 2 at a higher price. For example the new 150w inverter charger has a 30w USB C for charging, alot of folding solar panels have a 45w USB C port, So I can see them coming out with version 2 that supports 45w USB C with a fancy marketing hook- "now with 50% faster charging".
@zeruty
Жыл бұрын
Isn't the new 150w one the new version 2? That includes USB-C when they should have included it on the first 150 watt inverter (that HD is currently pushing)
@tonygoodman8707
2 ай бұрын
Good video, that was informative 😎
@dez5
3 ай бұрын
Great video. Am I use it for Video gears.
@cline7472
Жыл бұрын
Thanks for your review. If I run a 12V device from this power source are there any pros/cons to using the lighter socket vs the USB-C PD port? Does the USB-C automatically detect the required voltage or do I need a special cable or adapter to deliver 12V?
@robdewhirst7525
Жыл бұрын
USB PD requires negotiated power on both ends. You need a PD "decoy" module to get precisely 12V negotiated from USB PD. if you want 12V and only one of the ends is USB PD, you are better off using a cigarette lighter pigtail and making your own adapter to something like XT30.
@yomommaitsahoe8115
Жыл бұрын
I make one with MAKITA CHARGER as base and I buy on ebay circuit board to lower 18v to 12v to a car sucked 👍hope this be useful
@bkc9708
2 ай бұрын
Thanks for the video. I just ordered one of these. Do you think this will provide power a portable paddle board pump to inflate paddle board?
@SerendipitySue
2 ай бұрын
I would expect it to be able to
@brianm9962
5 ай бұрын
Just recently bought one and the USB C PD outlet cause my new Samsung phone and tablet to constantly charge/no charge/charge/no charge. The other USB outlets work fine, and I did not try the 12 volt outlet. Ryobi tech support had not heard of the 30w PD outlet issue and so I went back to Bunnings to exchange it. A new one did exactly the same, so I took a refund instead. I have the two 150w inverters, one came with a solar panel and can charge the ryobi battery via USB C. They have both worked really well so far.
@SerendipitySue
5 ай бұрын
bummer you had a problem with your phone
@brianm9962
5 ай бұрын
@SerendipitySue sure was. The phone and tablet charge perfectly fine from other battery banks and mains chargers so I was very disappointed.
@chriswatchingyt
Жыл бұрын
Very good video. Question about the cpap. I always thought it could only run on pure sinewave otherwise it shortens the lifespan of the device. How well does it handle the stepped sinewave?
@SerendipitySue
Жыл бұрын
This ryobi is DC only. I ran the cpap off the 12V
@terrijuanette486
Жыл бұрын
Great review. Thank you!
@davidr9876
Жыл бұрын
How is the run time on the CPAP compared to the 150w AC inverter? I expect more parasitic loss due to converting to AC so if you have a DC plug for the cpap, I'd expect this to be better. Same for phone or laptop charging since the other Ryobi charger/inverter has the AC plug hot all the tim
@towpathguitars
Жыл бұрын
I have the same question.
@SerendipitySue
Жыл бұрын
I'm trying to figure out a good test for this. Intuitively I would expect the DC to be more efficient and last longer.
@ianladbrook
Жыл бұрын
Where can I buy one in Australia
@SerendipitySue
Жыл бұрын
@@ianladbrook not sure, Ryobi seems to release different products at different times in different countries
@chriswatchingyt
Жыл бұрын
Excellent review of the power source. I was wondering if you could add a link for the DC adapter used to power the Dreamstation 2 cpap. Thanks.
@SerendipitySue
Жыл бұрын
OK, I added it to the description
@altmuligmannen3086
5 ай бұрын
I would like to have a 13.8 volt adapter/converter like the one you made yourself. Are they available anywhere at all?
@dmo848
9 ай бұрын
I literally carry around the huge lantern 😂 cause it has the usb port. Yeah i need an upgrade can you tell😅
@jaycarneygiants
Жыл бұрын
The RYi150CVNM ac inverter was 90% efficient (65 out of 72wh). Why is this DC port so low only getting 70% efficiency? thx
@StevenMussels
Жыл бұрын
could be a slightly worn out battery
@js7916
Жыл бұрын
Unfortunately, right out of the package mine does not work. Tried five different batteries and a bunch of resets and nothing. No power light, no work light.
@immrnoidall
Жыл бұрын
Why on earth would they make it 12v ? wouldn't 13.8 be more efficient?
@SerendipitySue
Жыл бұрын
yeah, I keep telling them to make it regulated 13.8V. That's what I've done with several of my DIY projects
@immrnoidall
Жыл бұрын
@@SerendipitySue I,m looking for a 24v to 13.8v regulated. for my camper. how many amps should it be?
@SerendipitySue
Жыл бұрын
@@immrnoidall all depends on what you are trying to run with it. I've used both the 30 amp that can run 400W ( amzn.to/3PEOdaY ) and the 20 Amp (amzn.to/445GgQw ) that can run 270Watts
@neilmayo6868
Жыл бұрын
Hey Ryobi, where's my multi battery One+ pure sine wave inverter/charger. Waiting to spend my money.
@19frog68
Жыл бұрын
Just announced - Pure Sine - 8 battery capacity - 18volt
@neilmayo6868
Жыл бұрын
@@19frog68 Hooray!!!
@GadgetMan777
Ай бұрын
Does it shut off automatically or can it be left on indefinitely?
@SerendipitySue
Ай бұрын
The batteries BMS will eventually shut the battery off when it is low
@teresaallen3045
Жыл бұрын
I s it possible use older batteries with this power source recharge new battery on older charger
@billbuss7542
Жыл бұрын
Will it power a shop vac?
@lewisp417
Жыл бұрын
I am afraid to try to charge a gaming laptop.
@StevenMussels
Жыл бұрын
If you have a 12v car adaptor for the laptop it'd work just fine, but if you use an inverter you'd need a pure sine wave one or you'd lose a lot of efficiency
@MyLifeMyMoneyMedia
Жыл бұрын
@@StevenMussels. Thanks, several weeks ago I used the Type C to charge my laptop. I hope it was clean energy and did not hurt my laptop.
@faericky1624
Жыл бұрын
Do u think I can turn on a vanity for like 10 min or less with this
Пікірлер: 53