Good move for Springfield Armory. I love Hi Powers and this one looks like a great clone.
@DavidLLambertmobile
2 жыл бұрын
S-A was smart to ditch the mag safety. The re engineered hammer was +. A ambi safety as a 🏭 optional choice would be ✔.
@markstrain8989
2 жыл бұрын
Amen 🙏 🙏 🙏
@dennisjohnson1546
2 жыл бұрын
Just picked my SA35 up this morning. It has an awesome trigger pull and is beautiful all the way around ! I love this gun .
@Delta82
2 жыл бұрын
This gun is going to sell like crazy!!
@walterkurtz4360
2 жыл бұрын
I sure want one
@DavidLLambertmobile
2 жыл бұрын
S-A making a new 10mm or .40 version. That will be a +. 9mm is a good start. I'm left handed so a stock SA35 might not meet my needs.
@christ6463
2 жыл бұрын
Dovetailed white dot front sight Tactical rack rear sight Round hammer Left side thumb safety 15 round magazine (yes!) MSRP $699 All good things to me and now on my To Get List. P.S. I'll take one in a 12+1 .40 S&W too.
@Theironchief
2 жыл бұрын
Mostly likely for 40 they might have 15 +1
@junkyardwillie8320
2 жыл бұрын
Also no mag disconnect. Yeah, with a true browning you can remove it in a pinch, but with this, no need.
@M2fiftycal
2 жыл бұрын
I seriously doubt they'll be making a 40 version. That's very wishful thinking.
@Theironchief
2 жыл бұрын
@@M2fiftycal let’s see what the next few years shows us
@505fastlife6
2 жыл бұрын
For me there aint nothing like a metal pistol.
@taps_1021
2 жыл бұрын
That's gonna be a hit 👍👍
@timfarrell6968
2 жыл бұрын
A HUGE hit
@m1ggi3
2 жыл бұрын
I think so! 💪🏼
@stevepoe3667
2 жыл бұрын
I really like the look the HI power pistol design is very attractive I believe this is going to be a success story for Springfield armory hands down.
@Galensgab
2 жыл бұрын
The best "natural" combat handgun ever made.
@OutnBacker
2 жыл бұрын
I agree, but a lot of these plastic wonders are pretty good, too. It's something to appreciate that ALL modern combat doble stackers are variations and evolutions of this fine design. I like my 1911's, but outside the US, the HP rules the world of iconic side arms. By the way, it was Deuidonne Saive who finished the design after John Browning died before it was completeed. Saive perfected it by making the double stack work, and by contouring the form to achieve its un-matched ergonomics for the time. Nothing like it except the CZs, unitl plastic molding came along. I have some very good plastic guns, but the HP is by far, my favorite handgun. The Colt/FN 1908 Hammerless is very close as well. Perfect fit and pointability.
@bryanshaw4434
2 жыл бұрын
I don't know how many more of these SA35 videos I can watch. But I'll let you know when I'm done. Love that pistol
@thespankdmonkey
2 жыл бұрын
Got mine on order from a shop here in Vegas just today! Said it would be about 2 weeks. No problem. Happy to wait for this little gem!
@OutnBacker
2 жыл бұрын
Do you mind revealing yor price? I'm certain it will quickly escalate.
@thespankdmonkey
2 жыл бұрын
@@OutnBacker Roughly $649 out the door with an extra magazine and a nice holster.
@graymann7762
2 жыл бұрын
I love this video. The gun + the music is a total win.
@frankbrowning328
2 жыл бұрын
Gonna be hard to keep these on the shelf. They'll sell out quickly
@DavidLLambertmobile
2 жыл бұрын
I rarely buy guns from brick and mortar places. I'd bet 75-80% of the gun shops, crew have no clue what a SA35 9mm is or who has it. 🤷♂️
@frankbrowning328
2 жыл бұрын
@@DavidLLambertmobile Its a shame that all of the good gun shops in your area either never existed or are gone
@shooterqqqq
2 жыл бұрын
Dieudonné Saive at Fabrique Nationale designed the Hi Power using Browning's patents.
@OutnBacker
2 жыл бұрын
I was of the opinion that he prefected the double stack to make it function and re-contoured the piece for its excellent ergonomics. Was he instrumanteal in doing more? That's a lot - and probably the main reasons it was so popualr, but I'd like more info on this man. Thank you.
@kamikazekunze
2 жыл бұрын
Just picked mine up, can’t wait to shoot it. I can’t believe I was so stuck on the ole 1911. 😜
@colt10mmsecurity68
Жыл бұрын
I pick mine up in two days. As of today in March 2023, MSRP rose to $799.00. My dealer charged me $749.00. Mine is in the 18xxx serial number range. Evidently, they’ve fixed the extraction issue at around the 7000 serial number range.
@larryb.1884
2 жыл бұрын
Looks like a great platform for the 10mm round also!
@Crowbrother7
2 жыл бұрын
I currently have a FM BHP (made in Argentina under Browning) which I carry for EDC (Appendix carry) and I love it! Comfortable and amazingly accurate! Can't wait to get my hands on the SA-35, though!
@americanmilitiaman88
2 жыл бұрын
Since I was a kid I always wanted a high power but i knew i would have problems with the hammer biting my web of my hand cause they are rather large. Cant wait to get my hands on the Springfield one
@joninwv
2 жыл бұрын
Watch the pistol twist in your hand in the slow mo. You need to adjust your grip so it goes straight up and down.
@Guitardrumr
2 жыл бұрын
If he is shooting accurately, why does it matter?
@stejac51
2 жыл бұрын
@@Guitardrumr because in real life 2nd shot follow up will be affected by this poor technique ...
@Guitardrumr
2 жыл бұрын
@@stejac51 Which is covered by the statement 'If he's shooting accurately'. So, again, if he's shooting accurately, why does it matter?
@ardyrides834
2 жыл бұрын
They should make a Polished Blue model, like the original Hi Power. I miss the polished blue steel handguns...
@kimmorrison9169
2 жыл бұрын
10-4, we need to see more blued pistols. Not a fan of the flat matte finishes I see regularly now.
@therealhawkeyeii7888
2 жыл бұрын
John Browning was long gone from this world by 1935. He can still be credited with much of the design, however, in that it is largely an updated 1911, which he designed all on his own. He contributed a small part to the early ideas ultimately leading to the P-35, but beyond that, its finished product was exclusively the work of Dieudonné Saive, an engineer at FN, who had been Browning's protege many years previously.
@GunTalkTV
2 жыл бұрын
That is true.
@sig7798
2 жыл бұрын
What have you heard about and what can you elaborate on with regard to issues with the SA-35 i.e., extractor problems, fit & finishing issues?
@enzowarren9832
2 жыл бұрын
If only someone other than Springfield was making this!
@AICW
2 жыл бұрын
You'll have to look to Turkish manufacturers. Tisas and Girsan are also making Hi-Powers, the Girsan ones are imported into the U.S. by EAA. I'd take either of those any day over traitorous Springfield.
@enzowarren9832
2 жыл бұрын
@@AICW are Girsan guns made well? The only thing I know about them is their knockoff Beretta style pistols that a gun shop tried selling me when I asked for a Beretta. Wasn’t really interested in them, but if their Hi Power is good, i’m definitely interested. I do not want to give any money to Springfield at all.
@GuroBillyBrown
2 жыл бұрын
Wow. Can't wait to get one! This guy's grip structure doesn't do this gun justice, I can bet that muzzle flip isn't as extreme with a proper grip as this clip is showing.. . No disrespect to this man as I do not know him, just a observation . But it's going to be a great selling gun for Springfield for sure!
@sweetcostarica
2 жыл бұрын
Better to buy the real deal. See the "new" FN Hi-Power P35 at Shot Show 2022.
@jeffreymcfadden9403
2 жыл бұрын
Browning did not design the HiPower. He began the process to design it, but he died long before completion. A Belgium designer did most of the design work.
@justing42
2 жыл бұрын
And?
@ryanh.3192
2 жыл бұрын
...and Dieudonné Saive, who was a brilliant gun designer in his own right (FAL), incorporated several features of the 1911 into the Hi Power, after the 1911 patents expired in 1928. So yes, Browning did design the Hi Power, even from beyond the grave. ;-)
@denniskasza6069
2 жыл бұрын
like to see a Radom vis mod. 35 get the same treatment
@ivansanta-maria1328
2 жыл бұрын
Springfield armory please make this work of art in 40sw or 45acp.
@bolseg1
2 жыл бұрын
I have a two tone Portuguese made BHP and plenty of Magazines. Hopefully my old magazines will fit this awesome too SA 35.
@ajaywhite9103
2 жыл бұрын
Supposedly yes
@a.c.2499
2 жыл бұрын
Hopefully they'll make a modern one with a tactical rail.
@Sandhill1988
2 жыл бұрын
And an 18 round magazine capacity.
@joshuabissey
2 жыл бұрын
Why 2 mentions of the curved trigger? Aren't most triggers curved?
@cecilsowers8242
2 жыл бұрын
Oh I will have one!
@officerzanzibar701
2 жыл бұрын
I will be buying one! If Springfield Armory would manufacture this handgun with an aluminum frame to reduce weight, now you really have something! Get you some of that!
@kylen.6742
2 жыл бұрын
Axle Foley carried a Hi-Power
@uconnapharm
2 жыл бұрын
Springfield ! I live in Connecticut - PLEASE give us a 10 round version !
@Hercules1-v9m
2 жыл бұрын
The original 10 round magazines will fit and I am sure they will produce new mags for the commie stat......I mean "restrictive" states.
@vzhojh3845
2 жыл бұрын
Move out from there
@residentevil5fan18
2 жыл бұрын
@@vzhojh3845 Connecticut before sandy hook was one of the most pro gun states, unfortunately now it’s top 5 worse for gun rights,
@vzhojh3845
2 жыл бұрын
@@residentevil5fan18 greetings from Texas
@therealfilthyanimal
2 жыл бұрын
I want one!!!
@556suppressor
2 жыл бұрын
Hope the hammer bite is not a problem. I think they tried to fix that problem. Taking band-aids with me anyways after I buy one.
@stevehorsman5414
2 жыл бұрын
Nice job Ryan! Miss seeing you guys! Hope to see you all soon!
@tonyfullmoore1333
2 жыл бұрын
I'm not a Springfield fan but this is an exception. I'm getting one.
@JeremiahJS1984
2 жыл бұрын
Great review! Does anyone know when this will be hitting stores?
@elund408
2 жыл бұрын
now but the prices are sky high,
@lisasanchez6694
2 жыл бұрын
Question: are parts interchangeable with the OG Hi Power?
@JWhitesAZone
2 жыл бұрын
Yes, I heard somewhere that most of the parts should be interchangeable, but that the Springfield has tighter tolerances. I just want to know where I can buy one.
@princeavaritia
2 жыл бұрын
@@JWhitesAZone If true that'd be badass Probably be able to use most of the upgrades BH Spring works sells
@Csmallo
2 жыл бұрын
Will original magazines work in this pistol?
@formerpilgrim4934
2 жыл бұрын
Yes
@philsmgb4393
2 жыл бұрын
@@formerpilgrim4934 Double yes.
@Csmallo
2 жыл бұрын
@@formerpilgrim4934 That is good to hear. I imagine the SA magazines will be priced as if they were made out of gold. I could see them changing the mag release just enough to require SA mags. So I am glad they didn't do that.
@obeyt-raw4876
2 жыл бұрын
Yes
@aggrodkreg4321
2 жыл бұрын
@@Csmallo Apparently, Mec Gar is the one making the magazines.
@joelborden3242
2 жыл бұрын
I like the SA35, but your presentation would have been stronger if you showed us a Hi-Power
@jeffreylocke8808
2 жыл бұрын
Bet an aftermarket flat trigger will be designed with no overtravel and nice smooth release for the SA-35. And no magazine disconnect as well for this new SA-35 Hi-Power from Springfield Armory.
@454FatJack
2 жыл бұрын
Super I love HI-power, Have two and one Argentina short slide/ barrel Detectivo.. SprirgF. export to Europe? Please
@totizabayle377
2 жыл бұрын
I am glad it is not so bad msrp for this quality handgun.
@hansblitz7770
2 жыл бұрын
Jumpier than a modern mini stack n a half 9mm.
@jeffreylocke8808
2 жыл бұрын
The French required magazine disconnect has been dropped too. Resulting in a better trigger pull. Hopefully a flat face trigger may be developed to fit the SA-35 will be available soon.
@john__lemon
2 жыл бұрын
They need to make a full frame competition version of this handgun
@heaththompson3834
2 жыл бұрын
No mention of getting rid of the magazine disconnect which improves the trigger pull significantly.
@WheeledandWellArmed
2 жыл бұрын
I think Springfield will make many more versions of the BHP: *Stainless steel version *Detective version *Practical 2 tone version *Renaissance version *Tactical TB version *Red dot versions on some As a BHP lover I look forward to seeing them come back.
@asherdie
2 жыл бұрын
Lionheart industries
@brucefoster2289
2 жыл бұрын
Wonder how the reset is. Also, how much for extra magazines.
@VRGalaxy_762
2 жыл бұрын
Do you know what the street date/availability date is?
@kevinward8915
2 жыл бұрын
Expecting mine tomorrow
@devinnguyen123
2 жыл бұрын
I’ve been watching 4-5 SA-35 videos all day and not one of them says anything about the release date.
@dlife7427
2 жыл бұрын
Same. I saw one on gunbroker already bid up too 750. I'm betting local dealers get them this week
@robwilson3749
2 жыл бұрын
This doesn't answer your question I know but I see Brownell's is taking pre orders for around $650.
@dlife7427
2 жыл бұрын
@@robwilson3749 I should have just put a pre order in. I bet these are gonna be hard too find for that price.
@johnwhitneykokalis9990
2 жыл бұрын
I can't find one ANYWHERE. And I want one bad.
@terrygoodman4054
2 жыл бұрын
Definetly sporting a "woody" now!
@holmesfamily2058
2 жыл бұрын
Did Springfield do away with the magazine safety?
@avalonavian3781
2 жыл бұрын
Yes!
@HighFalutinTootin
2 жыл бұрын
I love it
@sgtdevildog7134
2 жыл бұрын
Could these 15rd mags fit perfectly into the original Hi-Power though ?? I have an Original one ..beautiful gun to shoot by the way !😎🤙
@vzhojh3845
2 жыл бұрын
Yes it does…..exactly the same with 2 more rounds and the Springfield Armory logo on it.
@vzhojh3845
2 жыл бұрын
Greetings from Texas.
@cascadianrangers728
2 жыл бұрын
Will this be compatible with aftermarket hi power parts, I'd like a front night sight, extend magazine catch and slide release, magazine well, and upgraded trigger...is there a magazine disconnect?
@LiteralCrimeRave
2 жыл бұрын
Full parts compatibility, but tighter tolerances. No disconnect
@toyotrustPR
2 жыл бұрын
Very nice
@jamesfischer4813
2 жыл бұрын
Available where MoFo? I am looking with cash, can't find it
@ElCineHefe
2 жыл бұрын
LOVE IT!
@m1ggi3
2 жыл бұрын
At that price point? SA will make a killing with these👍🏼💪🏼
@westtexas3041
2 жыл бұрын
Great video.
@GeeMann95
2 жыл бұрын
Love it!
@philsmgb4393
2 жыл бұрын
Getting one.
@Deputybull
2 жыл бұрын
Do original BHP magazines work in it?
@pastlast158
2 жыл бұрын
Is it Californication compliant?
@asherdie
2 жыл бұрын
Lionheart industries FTW
@Darknightfantom
2 жыл бұрын
whant one, need one, got to buy one
@ed5042
2 жыл бұрын
am already trying to buy one !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@wheeldog5555
2 жыл бұрын
So why only one mag?
@LiteralCrimeRave
2 жыл бұрын
You can buy more. Most guns just come with the one
@wheeldog5555
2 жыл бұрын
I guess I got spoiled with Glock giving me three. One gun with one mag reminds of 1994.
@ryanh.3192
2 жыл бұрын
For an MSRP of $699, in 2021, I don’t mind. Mec-Gar makes excellent & inexpensive HP mags that should function in this.
@jetg2059
2 жыл бұрын
Hope they make a Massachusetts complaint version
@Sandhill1988
2 жыл бұрын
By the time they make a Massachusetts compliant version it won't even be worth buying.
@wardroland270
2 жыл бұрын
Thanks GTM. Great job. Good info. God bless. LETS GO BRANDON
@493john
2 жыл бұрын
When can we get one?
@coltsandbows
2 жыл бұрын
Will regular BHP mags work in it?
@JBrtn85
2 жыл бұрын
Yes
@JBrtn85
2 жыл бұрын
@Bass Slapper Springfield says it takes original style surplus mags. So, yes.
@MajimaGoro8
2 жыл бұрын
@Bass Slapper Pathetic attempt at trolling.
@LiteralCrimeRave
2 жыл бұрын
@Bass Slapper proof?
@LiteralCrimeRave
2 жыл бұрын
@Bass Slapper yes
@johnkizziah108
2 жыл бұрын
Cant find um..
@ivannieves5708
2 жыл бұрын
If they make it in stainless then it will not be in stock for years
@10esseeTony
2 жыл бұрын
This gun has sights, it has a no bite hammer, it has a safety, it......uh....let's shoot it. Pretty major detail you went 'uh' on and left out, mag safety removed...
@750suzuki
2 жыл бұрын
I stand BEHIND Alec Baldwin!!
@ge-8135
2 жыл бұрын
I'd buy one just to fondle. Pretty.
@DavidLLambertmobile
2 жыл бұрын
The hard 🎸 rocker music distracts from the content. You dont need thrasher music to sell 9mm Hi Powers...
@jaythomas3583
2 жыл бұрын
Hope this won’t end up like the dagger with the price going up
@TheShawna1
2 жыл бұрын
I'ld buy one in a second if they had an on/off screw under the grip for a decocker.jim
@stejac51
2 жыл бұрын
.... look to BH Spring Solutions for their SFS kits ... makes for a PERFECT safe to carry Hi Power.
@jb6027
2 жыл бұрын
Turkish Tisas parts????????????????
@douglasbroccone3144
2 жыл бұрын
Ok now how about a single stack?
@royseleech3524
2 жыл бұрын
I saw one for $675.00, I want one but I live in Commie California
@missouribattleflag328
2 жыл бұрын
👍⭐⭐⭐⭐⭐👌
@DG2244
2 жыл бұрын
$1199.99 last check.
@burkholdst.rudderberg3574
2 жыл бұрын
I have watched several of these new Hi-Power videos today; you are one of the few guys actually HOLDING A GUN CORRECTLY! Many of the other guys actually had their free thumb AGAINST the slide! ( Try to place your free thumb near a forcing cone on a Smith &Wesson model 29; good by thumb!
@majormayo2962
2 жыл бұрын
Its a semi auto, a proper grip will have your support thumb riding high near the slide. You won't lose it, and it won't impede function of the gun and will help mitigate recoil most effectively. Granted on a revolver thats a no-no but on a semi auto it doesn't matter
@burkholdst.rudderberg3574
2 жыл бұрын
@@majormayo2962 Sorry, I don't agree. With a proper grip, your thumb, on your left hand ( if you are right handed ) will be covering your right hand ring finger. Your left hand is basically creating a tight cup in which you place your right hand. ( I have only been shooting hand guns for over 50 years - and I shoot to this day! ) As far a revolvers go, bad habits are hard to break!
@adamwickes6189
2 жыл бұрын
No, that's an obsolete old-school grip that stopped being used decades ago called the "teacup grip." MajorMayo is correct. While you don't want to ride the slide with your thumb on a semi-auto, a modern "thumbs-high" grip is the most efficient grip for controlling recoil on a semi-auto pistol, and for that reason is the grip most commonly taught by today's pistol instructors. For shooting a revolver, the most commonly taught grip is left thumb over top of right thumb, while the left hand applies most of the pressure.
@burkholdst.rudderberg3574
2 жыл бұрын
@@adamwickes6189 I'm sorry, I see the error of my ways. ( You do understand cynicism don't you ? ) As I have a obsolete old-school Browning Hi-Power, I will continue to use an obsolete old-school grip! You, and the Mayo can use your new improved grip on your new and improved plastic guns, I will go with a time-tested proven method.
@LiteralCrimeRave
2 жыл бұрын
@@burkholdst.rudderberg3574 Time disproven method. Old school boys also operate their bolt guns with two fingers
@bullast2046
2 жыл бұрын
This is the only move they could make… but… not sure if I’m ready to give them my $$$ yet.. sh*theads
@Desperado3248
2 жыл бұрын
Should have had an ambi safety. They are probably using mecGar 15round mags . The pistol should come with 2, and in mag restricted states, 3 ten rounder. Like that makes the pistol safer.10round mags are not standard capacity , they are reduced capacity. Standard capacity is what the pistol was designed to hold without an extended magazine. Still nice to see the High Power back and affordable. Springfield should offer an alloy frame version to cut the weight to around 26 ounces
@snoopywl8880
2 жыл бұрын
Why can't you guys just be happy that there is a new high power. It's meant to be a clone of the classic not some new tacticool competition pistol
@SixBarrel
2 жыл бұрын
You.dont have a high power? To put this next to? All talk,and talk ,
@jimquinlan5000
2 жыл бұрын
MIGHT BE A GREAT PISTOL BUT THEY'RE NO WHERE TO BE FOUND. SO I VE STOPPED LOOKING AND NOBODY WANTS TO SELL ME A SA-35 SO I'M BUYING A WHALTHER PPQ
@mikemorris1760
2 жыл бұрын
Who taught that guy how to hold a pistol? It’s twisting in his hands. LOL
@Sandhill1988
2 жыл бұрын
Looks like a really nice piece. If I didn't already have this covered with something else that's actually a better weapon more modern with a higher magazine capacity and internationally compatible I would absolutely consider it, but there are better more practical options out there. This is more for fun and nostalgia then outright function and practicality. But alas thousands will be at the gun store with their pants around their ankles and their credit cards in their hands nevertheless.
@OutnBacker
2 жыл бұрын
Yup. Guilty as charged. I'm already shedding my belt. As for being more for fun and nostalgia rather than practical - that's a laugh. Fifteen reliable, modern, hard hitting rounds from a 4+ inch barrel isn't just for nostalgia. The giggles-n-grins are for good reason.
@vzhojh3845
2 жыл бұрын
@@OutnBacker well said brother….greetings from Texas. I can’t wait to put my hands on a SA 35.
@ralphcox5731
2 жыл бұрын
good luck at the price lol
@familyman3573
2 жыл бұрын
"Updated", but no ambi safety. Dumb move.
@shooterqqqq
2 жыл бұрын
That is a dumb move. Left handed people have a tendency of getting into the shooting sports and then we're ignored.
Пікірлер: 209