Update to the front suspension and steering. New A-Arms, Knuckle and a Rack. This provides much cleaner suspension travel and stronger steering action. The original rack design was shared by the SkeeRide Discord user jibberjabbs. I slightly modified the rack and created new A-arms and knuckle. You will need 8 M3 rod ends and some M3 threaded rod. My rods were cut to 75mm and worked well. Depending on your rod ends you might need slightly longer or shorter.
There new files are in the "Mods 20-21" folder in the "Front Susp and Steer Mods" folder. You can find these when selecting download on the SkeeRide MyMiniFactory page.
Files Available here: www.myminifact...
The SkeeRide is a fully 3D printable RC snowmobile.
This was designed from the very beginning with easy assembly and minimal purchased parts as the goal. I think I have accomplished that goal. Everything is printed except for: Electronics, screws, bearings, and shocks. It can be printed on a print bed 200mm x 200 mm or larger. Most items do not need any supports but there are a few that will need some.
Discord community for support and to just see all the awesome builds: / discord
Please join and contribute to this awesome hobby.
Many of the parts of my design are inspired from other snowmobile projects that I have seen. I have reached out to those that some of my work might resemble. If you feel something looks similar to your work and you did not receive a message from me please reach out to me. Nothing in my design is a modified version of others work, All of it was hand made by me, but some may still resemble that of images I used for reference.
Disclaimer: Due to printer abilities being different and always changing, and the nature of an off road vehicle there is a good chance you will break parts. Luckily they should be easy to reprint and fix rather quickly. I will do my best to provide support through discord and if files are found in need up improvement I will do my best to improve and then include for free for those who have purchased the snowmobile. I give no guarantee that it will print perfect on your machine or that things will not break when you send the sled flying off a cliff.
Негізгі бет New Suspension and Rack Steering for the SkeeRide
Пікірлер: 75