Get your TP31 twin cylinder engine throu Petrinčič Bros here: hobbyking.com/...
Get your Petrincic Bros RC merch here: petrincic-bros...
Petrincic Bros RC Tshirts and hats here: shop.spreadshi...
Donations to keep this RC family together: www.paypal.com...
Get your Flying Tiger RC radio tray and harness here: flyingtigerrc....
Turnigy gas engines have evolved over the last few years, and have now culminated in the TP (Turnigy Power) series. These TP engines offer even more power and torque than previous versions, and they remain the perfect choice for model aircraft. They are lightweight, powerful, easy to operate, hand start with ease, and have a greater degree of reliability.
There is nothing like the look and sound of a twin-cylinder engine, the TP31-T is the perfect choice for a whole host of scale and sport model airplanes. The TP31-T has very easy starting characteristics and offers low maintenance running. It will give you almost as much power as its nitro equivalent but is more economical, and it uses regular gas that can be purchased from a gas station. The TP series comes with re-designed porting in both the head and cylinder which provides the extra power and torque. It still, however, allows the engine to be very easy to tune, whilst still maintaining a smooth power curve, and have a constant, reliable idle.
All TP engines have a composite insulator block that houses the reed valve and mounts between the Walbro carb and the engine. This insulator block helps stop heat transference from the engine to the carb for improved running. The supplied wide voltage TP electronic ignition module the timing automatically to give peak performance throughout the entire rev range of the engine.
The pumped Walbro carburetor sits underneath the engine which keeps the profile quite similar to that of a full-size flat aero engine, this makes it perfect for scale airplanes. Another feature designed to help fit the engine in scale cowls is the angled spark plugs, this reduces the overall width of the engine quite considerably. The engine includes stand-offs with mounting bolts, spark plugs, mufflers, and gaskets. Just add an ignition battery, a propeller, and mount it up to your favorite airplane.
All TP engines are test run and the Walbro carburetor is tuned before it leaves the factory. However, due to different altitudes and weather conditions, slight adjustments will be necessary when you run your engine for the first time.
Features:
• Realistic looking and sounding twin cylinder gas engine
• Re-designed porting for even more power and torque
• Cast aluminum crankcase with anodized aluminum components
• Walbro pumper carb
• Composite carb insulator
• Compact mufflers with gaskets
• Wide voltage auto-advance TP electronic ignition module
Specs:
Type: Turnigy TP31-T 31cc Twin Cylinder Gas Engine
Piston Displacement: 31cc (1.89 cu.in)
Bore and Stroke: 32 x 19.6mm (1.26x0.77in)
Compression Ratio: 8:1
Max Power Output: 3.7hp @ 8500rpm
Rev Range: 1600~8500rpm
Static Thrust: 7.8kg (17.2lb) @ 100m (328ft)
Static Thrust: 6.3kg (13.9lb) @ 1800m (5905ft)
Suggested Propeller: 17x8, 18x8
Suggest Break-In Propeller: 17x8
Spark Plug: 2 x 1/4-32 ME8
Carburetor: Walbro WT978B
Cooling System: Air-cooled
Ignition: DC-CDI computer-controlled auto advance electronic ignition system
Pick-Up Sensor: Hall effect (small size)
Ignition Voltage: 6~12V
All Up Weight: 1178g/2.6lbs (inc ignition and muffler)
Recommended Fuel/Oil Ratio: 30:1 90 Octane unleaded gasoline and 2T Oil
Included:
Turnigy TP31-T twin cylinder gas engine w/Walbro carb
Electronic CDI ignition unit
2 x muffler with gasket and bolts
2 x 1/4-32 ME8 spark plug
Set of stand-offs
Set of mounting bolts
Power harness
Instruction manual
Required:
6~12V 1200mAh or larger capacity battery
Fuel tank and piping suitable for gasoline
Suitable propeller
2 stroke 30:1 gasoline mix
Негізгі бет NEW!!! Turnigy TP31-T 31cc Twin Cylinder Gas Engine w/CD Ignition and Walbro Carb 3.7HP First run
Пікірлер: 144