Just done the install, I got away with not removing anything. Fuse box and overflow tank stayed in, I just used a spanner. Kit fits perfect, did it in 30 min while watching this video as a guide.
@Davemandy61a
Жыл бұрын
Found this very helpful however if you gently lever the fuse block away from the fender you gain ample room to remove and replace the lower mount. Likewise if you undo the lower fixing bolt on the rad overflow tank it moves enough to do the drivers side lower mount bolt. Keep up the content legends.
@piratecampco
Жыл бұрын
G'day legend, thanks for your support. Totally agree, when i filmed this i didn't want to come across as a roughy when i pushed on the fuse box haha. as for the rad overflow, it took me a few installs to discover this hahaha. Thanks for the feedback too legend!
@robito1990
Ай бұрын
Good bit of kit ordered and received next day and easier than the video portrays to install . Takes about 10-15min if you're handy on the tools. Pro tip you won't need to remove anything use a 13mm spanner to loosen bolts instead of removing fuse box and overflow tank
@piratecampco
Ай бұрын
hell yeah, thanks for the support legend!
@julianfoster9896
Жыл бұрын
These are superb, arrived quickly from Oz to the UK and fitted this evening.... easy lift and closure...👌👋
@piratecampco
Жыл бұрын
Thanks again for the Support legend! Let's get some more pirates in the UK.
@GaryKorp-b9y
Ай бұрын
Hi, I would suggest to anyone doing this job your first step is remove your negative battery terminal.
@piratecampco
13 күн бұрын
what he said! thanks for the support legend.
@ScottyD_NZ
5 ай бұрын
This are the best "official" install videos I've seen. All the info you need, extra tips, you get to see it all happen. Give this man a raise (or another crate).
@piratecampco
5 ай бұрын
hahaah thanks legend!
@cljb1074
3 ай бұрын
Can you list the tools needed? I have the strut combo kit.
@piratecampco
3 ай бұрын
G'day legend, 7mm socket 8mm socket 10mm spanner 10mm socket 12mm spanner 12 mm socket 13mm spanner 13mm socket ratched to drive the said sockets small flat blade screwdriver
@RocketRod63
Жыл бұрын
You guys are coming up with some interesting stuff 👍👍
@piratecampco
Жыл бұрын
Thanks legend, we appreciate the support!
@BigWillRacing
Жыл бұрын
About time, keep up the good work.
@piratecampco
Жыл бұрын
thanks legend!
@georgecarmody9258
5 ай бұрын
Bit of a pain, factory fitted arb spotlights bracket sits in the way of the passenger side mount
@piratecampco
4 ай бұрын
G'day legend - thanks for reaching out. Could you please email us at sales@piratecampco.com.au with some photos, so we can see what the issue is.
@SoCalMikey
3 ай бұрын
I think I may have this issue as well when I have a-pillar light brackets installed this week. With the struts installed, there isn’t alot of thread left for the light bracket to be added there, potentially allowing it to loosen and become unsafe. If you could make a version with the arms for the lights going over the hood, that would be awesome. Thanks
@ShaunAngliss
Жыл бұрын
Just put this on my raptor. Good kit and easy enough to install.
@piratecampco
Жыл бұрын
Thanks again for the support legend!
@AceThreeSixNine
2 ай бұрын
That was tough to watch
@piratecampco
2 ай бұрын
a couple of beers might have helped
@Marty-dq7us
6 ай бұрын
How do I get these in UK.
@piratecampco
6 ай бұрын
G'day legend - thanks for watching. Super easy. Just follow the link below and order, we ship 3-5 orders a week to the UK now. piratecampco.com.au/collections/next-gen-ford-ranger/products/stacked-bonnet-strut-bracket-ranger-everest-2022
@richardberg2327
7 ай бұрын
Installed mine today awesome well done gents
@piratecampco
7 ай бұрын
awesomeeee, thanks for the support legend!
@k9-unit-australia275
Жыл бұрын
Im just fuckin stoked there’s literally something AUSTRALIAN made and an Aussie owned company. I hope get heaps of business & gain huge success mate.👍👍🇦🇺🇦🇺🇦🇺
Пікірлер: 30