Just realized I missed out on the opportunity to call it the DIY-wing in the video. Sincere apologies to everyone
@tchallawakanda5889
5 жыл бұрын
Is he done with the at te dropship
@Scharnvirk
5 жыл бұрын
@@tchallawakanda5889 Sorry, didn't even start.
@tchallawakanda5889
5 жыл бұрын
@@Scharnvirk what did you didn t start
@danielbadescu3064
4 жыл бұрын
Im stil waiting for minifiguri scale starkiler base
@iiKolin
4 жыл бұрын
Oof
@lionellines6351
4 жыл бұрын
1:06: The fact is, the Y-Wings didn’t _lose_ their paneling, so to speak. They had sleek cowlings on them, as seen in the Clone Wars and Rebels. However, when the Rebel Alliance got their hands on them, they quickly learned that these starfighters were particularly unstable crafts. After every battle, their mechanics had to open up the Y-Wings to make sure nothing was wrong. *They had to.* Often, there would be issues with the upper gun, which was often an ion cannon (although it could be replaced with a regular laser cannon), because such weapons are very fragile and easy to misalign. So easy, that sometimes the minimal stress that general space travel put on them was enough to mandate maintenance in order for them to regain their functionality. Now, none of these issues would normally be very large, except for those blasted cowlings. They were difficult to remove and replace, and were the topic of many a Rebel mechanic’s afternoon gripe. After a while, the Alliance heard their men’s complaints, and ordered that the cowlings be permanently removed on every part of the ship except the cockpit. They left the cowlings on the cockpit because they also served as a sort of armor plating. So you see, the Y-Wings didn’t lose their paneling, but merely had them removed to dramatically simplify maintenance.
@Tubular_DudeMan
3 жыл бұрын
You really know your sw ships
@lionellines6351
3 жыл бұрын
@@Tubular_DudeMan Thanks! I really like the Y-Wing. I know it better than most other Star Wars craft.
@ThatWolfFromHyruleGaming
3 жыл бұрын
You belong in Gold Squadron
@lionellines6351
3 жыл бұрын
@@ThatWolfFromHyruleGaming Thanks!
@ThatWolfFromHyruleGaming
3 жыл бұрын
If you play Squadrons, I wouldn't mind being your X-Wing backup in attacking a Star Destroyer
@CuppaTeaExe
5 жыл бұрын
Cant wait to see the progress on the minifig scale death star you guys are making!
@mruss3178
5 жыл бұрын
lol
@finscontingencyplan7005
5 жыл бұрын
Would be about 100 meters wide
@Renorick1
4 жыл бұрын
"The target area is only two centimeters wide..."
@badmoose01
4 жыл бұрын
That would be a minimum 3.11 km in diameter.
@mynameisfart7707
4 жыл бұрын
That would be the size of Time Square
@aguy1272
5 жыл бұрын
I'm still waiting for the minifig scale star destroyer
@andypandy1114
5 жыл бұрын
It would new 40m long
@aguy1272
5 жыл бұрын
Yeah I know
@tanner5809
5 жыл бұрын
Super star destroyer 😂
@szymofilu3517
4 жыл бұрын
Tanner Death Star would be better
@leanmeangreenbeanmachine3347
4 жыл бұрын
They’re working on a Minifig scale Tantive IV
@Slamdoxicalz
5 жыл бұрын
that's one awesome Y-Wing On a sidenote: R2-D2 enters a Y-Wing from the top. I'm pretty sure I seen a Droid get loaded in a ship from the bottom, but can't remember where, when or what ship. Nerd facts: Besides plating (armor), they removed the bubble turret on top and replaced it with ion canons. While doing so they shortened the nacelle extensions making the Y-Wings 7,16 meters shorter (resulting in cheaper LEGO sets :D)
@timewarpdrive77
10 ай бұрын
Yeah, the astromech legs actually poke out of the top of the astromech socket; I have no idea why he chose to have the astromech come in from the bottom
@jamescerio6406
5 жыл бұрын
I’d like to see a Z-95 (classic, not clone), Droid Gunship, Tie Silencer, Tie Striker, Tie Brute... and release that Phantom II!
@manifestman132
5 жыл бұрын
A Z-95 in Black Sun Syndicate colors?
@dragonblaster-vu8wz
4 жыл бұрын
Now we need a clone wars variant of the y-wing by this designer, specifically the blue variant from S7E12 of The Clone Wars, and with a rotating turret
@teakr
5 жыл бұрын
The y wings panels weren't lost or destroyed, they were taken off by the men who created them, as they found that is was easier for repairs and it made it lighter faster and more agile.
@carterdeering42
5 жыл бұрын
I would love a custom AT-ST to go along with the other walkers in the shop
@Scharnvirk
5 жыл бұрын
I'd like to add few things, as the author. - Please don't try to lift the ship by the head. It will snap off. It is designed to do so, otherwise something would break in the head and would be difficult to fix. As it is now, the head will snap more or less cleanly and should be easy to reattach. - The droid comes from the bottom because I wanted that square box around the head... yeah, not sure if it should go from the top or bottom, but this way it was easier. Also - to eject the droid all you need is to press on its head, it will push down the droid arms and actually lock on these, so you can extract the droid from half-hanging position. Thanks for great video, I am always waiting for these eagerly. I hope other viewers also like it. Cheers!
@lightsaberproductions8592
5 жыл бұрын
Looks absolutely amazing!
@geoduet5461
5 жыл бұрын
One day I'll buy all of those instructions and parts and build every one of this ships !
@trudellwbird3814
4 жыл бұрын
Dang l know right Sadly I'm poor and wish I was rich
@elifolgun7709
3 жыл бұрын
Not until i do first
@christianbarthel9065
5 жыл бұрын
Any progress on the Republic Dropship for the AT-TE?
@tchallawakanda5889
5 жыл бұрын
Your write dropship im buying it when its in the store
@BrickVault
5 жыл бұрын
I believe it's out of the digital phase and David is currently building it IRL to test its strength :)
@elaineryan5516
4 жыл бұрын
@@BrickVault thanks for saying
@WyattKittle
5 жыл бұрын
okay I see you guys saying this often and finally decided to speak up: the Y-wing you see in A New Hope etc is the BTL-A Y-wing. The version in the Clone Wars is the BTL-B. The original version is older both in our universe and in the Star Wars universe. The rebels were using ships that were that old. They didn't lose their plating; it's a completely different, older model with a different setup. They made improvements to the newer model to have this plating and everything.
@EvanMoon
5 жыл бұрын
I am really impressed about all the detail in the cockpit and the slope of the front of the ship
@pelle4036
5 жыл бұрын
Nice work!! Can we have MTT? I started to make my own.... but i think you guys Can make even better version of it.
@BrickVault
5 жыл бұрын
personally I like the MTT and my brother thinks it's ugly. It's a difficult one to get right, but I think it would be awesome to try
@pelle4036
5 жыл бұрын
@@BrickVault Yeah it is a bit ugly in my opinion too :D but MTT is still one of my favorites. Maybe because I'm a big fan of the droid army. Yep it is difficult but it is awesome to hear that you guys are thinking about making it :)
@jamescerio6406
5 жыл бұрын
BrickVault you could start out with the support craft that carry droids into the field.
@demetriousferris6675
4 жыл бұрын
I didn't even realize the tan feeling more realistic until you mentioned it, you rock
@michaelabrahamt8651
3 жыл бұрын
I have a quick suggestion, please make a clone wars y-wing. Thank you! I hope you see this
@InfernalBricks-Master-Jedi
5 жыл бұрын
This y wing is definitely next level 😍👍👌
@basamendt1692
5 жыл бұрын
WoW this is one of your best Mocs so far
@ds6080
5 жыл бұрын
Awesome! Definitely prefer the tan pipes!
@BrickVault
5 жыл бұрын
:)
@multikings20
5 жыл бұрын
4:28 to answer your curiosity in the Clone Wars episode Nomad Droids R2 boards a Y-Wing from the top, and I think it holds true for chopper in the Rebels episode Steps Into Shadow
@draagedeh1983
4 жыл бұрын
Honestly this is my favorite of the rebel fighters. Both Brickvault and Star Wars!
@lucaschurer7516
5 жыл бұрын
It is beautiful! The building technices, the angles the builder managed to capture.... everything!
@Ty-yy7zr
4 жыл бұрын
The only y wing that I would love to see would be the republic y wing.
@johnsyrett3926
4 жыл бұрын
This custom build definitely the best LEGO Y-wing I have ever seen
@spiffydart3280
5 жыл бұрын
Great looking y-wing, it’s the best one I’ve ever seen. Also, I would like to see an at-ap and at-st in the web store.
@foberdud7576
5 жыл бұрын
Very nice set-glad to see ppl stepping in and making alternatives Incase LEGO misses the mark.
@michaelabrahamt8651
3 жыл бұрын
Can you please make a clone wars y-wing that would be awesome with the clone wars series + it will look good on shelves
@RepublikRakyatNusantara
2 жыл бұрын
i would love to see a BTL-B Y wing/Clone Wars Y wing
@CryOfHelp
5 жыл бұрын
holy, there a lot of illegal building techniques... damn i love it
@hubertchow1261
4 жыл бұрын
Oh my I just finished building this. What a design!!! It looks absolutely amazing.
@henrik7154
5 жыл бұрын
Finally it is here and man is this awesome! Thanks guys for bringing this out together with Jerac (man everytime your models are more perfect than the last one) I will sure get this beauty build soon!
@StarWarsJay
2 жыл бұрын
Impressive. Most impressive.
@pills-
4 жыл бұрын
It would be massive, but a close-to-mini-figure scale Sith Infiltrator from the Phantom Menace would be an awesome build!
@SirCannonball
5 жыл бұрын
Iirc, originally the Y-Wing squadron was intended to be Red Squadron while the X-Wing squadron was Blue Squadron. This changed after ILM realized that the blue color scheme wouldn’t work for the scene given that the special effects were done using blue screens. Hence why the life-size mockup was originally painted red, with the change to gold happening after construction.
@Slender_Man_186
4 жыл бұрын
This is also why R2’s paint seems like it’s black in the trench run in ANH.
@timewarpdrive77
10 ай бұрын
@@Slender_Man_186 Only in the real versions
@darthvader6845
4 жыл бұрын
We need x wing t70 custom lego, lego's x wing t70 s-foils are inaccurate its disappointing
@defenderprime8046
5 жыл бұрын
This Y-Wing is really awesome! My second favorite ship in Star Wars, I remember when I got the very first Lego Y-Wing in 1999, it was cool by those days standards, but after all the others that have been built in later years, it's really evolved since then! Nice new model, guys!
@CHANN3L_NAME
4 жыл бұрын
Whats your first?
@richardkirkland6805
9 ай бұрын
Last I checked, the astromechs are top loaded in Y-Wings, just like in X-Wings. The only bottom loading ships I can think of are the N-1 Starfighter, and possibly the E-Wing (although I'm not sure about that)
@maximevandermersch2005
5 жыл бұрын
please you HAVE to make the republic y-wing and the republic z-95
@SwiftWind
5 жыл бұрын
To keep my UCS Y-Wing, or source it to build this one? *Sigh*, such a tough decision! Excellent work as always Jerac! Have already built 3 of your designs (TIE Fighter, Advanced, and Bomber) and plan to do even more! Love your incredible detail while maintaining good model stability for MOC's. Personally like the brown pipes but feel like there wouldn't be enough color variation in the body to "de-saturate" the brown, if that makes sense. Maybe a different color? Pearl gold maybe? At least for most of the piping minus the parts that don't come in that color, then you could use brown for those. What in the world could you possibly do next?! A TIE Droid perhaps? A V-Wing (airspeeder, not the Clone Wars era one)? Personally I would be incredibly excited to see a TIE Hunter, though that might not be possible at that wing size with how small the pivots for the S-Foils would have to be. Maybe a TIE Silencer? Now that would be sick. Always excited to see you next creation, and I'm sure I'll end up buying the instructions as well. :)
@legoguy8740
5 жыл бұрын
You just made me regret buying the UCS y wing last year. I could have used that money to buy this, damn it
@JM64
5 жыл бұрын
Should be able to transfer a good chunk of the parts
@lt.danhooper1635
3 жыл бұрын
4:26 The astromechs come in through the bottom in the Naboo N-1s, so that's not unheard of
@LoxyLight
2 жыл бұрын
So do they in T-70s, i doubt in Y-wings since they used to be armored so if they did have the feature it would probably be gone
@SpadeOfEmerald
5 жыл бұрын
yo i love it but to truly make this epic make the clone wars one 👌🏻 id love to see how the bubble turret would look
@noahwarnes4884
5 жыл бұрын
Beautiful
@XplodingTurtle
5 жыл бұрын
Id love to see an attempt at a minifig scale clone wars y-wing
@willsinfield8351
4 жыл бұрын
Tie fighters were originally blue and black but the blue screen just mad them look grey and black. The original Lego tie fighter sets were blue and black.
@MH-ff6zr
5 жыл бұрын
I got to say, at 5:5, I largely prefer this Y wing cokpit to the actual cokpit of their Y wing. I think its way more accurate and integrated to the entire build.
@craggywag5482
3 жыл бұрын
A full-paneled version would be awesome
@tobiasbrzitwa8758
5 жыл бұрын
Nice model, though I felt from the beginning that somegint looked strange. The detailing around the main body and cockpit is amazing as always, but the nacelles look off. After comparing with some blueprints, I think both the nacelles themselves, as well as the pylons to the aft engine rings, are way too short to be proportionate. They also seem to be slightly too big in terms of diameter.
@Scharnvirk
5 жыл бұрын
Nacelles are okay but now when I think of that, they could be moved one stud back. Pylons indeed are too short - this is because of available options for them being really, really wrong. Hm hmm hmmm.... Thanks for input!
@jakejohnson4118
5 жыл бұрын
I think a Tie Silencer would be really great from you guys!
@gamercore5216
2 жыл бұрын
You should make an armored/clone wars version
@ironstrider7659
5 жыл бұрын
A T2-B repulsor Tank or T4-B would be nice to see.
@Wi-Fi-El
4 жыл бұрын
The gray minifigure arm greebling is genius
@stirrednotshaken5904
4 жыл бұрын
12:02 every now and then I fall apart
@154reaperfang
5 жыл бұрын
If I ever find the spare change for this I think I'd go for a mix between the piping colors. Maybe introduce a few more colors into the greebling as well. As is it feels a bit too polarizing to properly appear "dirty" in my eyes
@ninjagoseason1129
5 жыл бұрын
this is epic
@comic-book-enthusiast
5 жыл бұрын
Awesome
@ryc.431
5 жыл бұрын
Beautiful, you guys should do an outrider ship next
@BrickVault
5 жыл бұрын
figscale one would be my dream build. We've talked w designers and done some baseline measurements. Outside of that the big one is still just an idea
@ryc.431
5 жыл бұрын
I worded that wrong, I mean Dash Rendars Outrider, outriders ship from marvel in fig scale would also be amazing though too
@trentmckenzie1697
5 жыл бұрын
Looks awesome Jack! Still have the UCS Y-wing in my back log so I may have to build that before sourcing the parts for this bad boy!. Tell Ramone to keep up the good work!!😉
@parishebel5806
5 жыл бұрын
I like the tan
@teddybier6103
5 жыл бұрын
Great. Waited for so long to build this. Great work 👍👍👍👍
@RojoFern
3 жыл бұрын
I don't think I could call this minifig scale, it's actually overscaled by quite a sizable margin. First we must establish how long an in-universe BTL A4 is, which is 16.4 meters. Looking it up on google provides the incorrect 23.4 meters, which is the length of the BTL B, or the clone wars Y-Wing. From what I can see it looks like this model is within the realm of 50-60 studs long, so for the purpose of precision I'll guestimate a 55 stud length. A bare bones minifig is roughly five studs tall, which means this Y-Wing has a ratio of 55/5 or 11 to minifigs. Applying the same ratio to the Y-Wing's true length puts a minifig's height in relation to the model at 1.5 meters tall or 4 foot 10 inches, which is a full foot shorter than the US national average height. This means that this Y-Wing model has actually been upscaled by 20%. If we are after true minifig scale we can reverse the process starting with setting a minifig's height; 5.9 feet is the average so we'll go with that. The ratio between a Y-Wing and this height is 16.4/7.8 or 9.1. 9.1 times 5 studs gives us a final stud length for a true minifig scale A4 of 46 studs long. Surprisingly this is actually shorter than the 2017 lego set, which has a length of 49 studs. So even the official lego set has been overscaled by a bit! Funny enough, it is actually the 1999 Y-Wing that comes the closest at 45 studs long. Applying the same logic to the other three OT fighters, we get these lengths: A-Wing RZ-1 - 19 studs B-Wing SF-01 - 48 studs X-Wing T-65B - 34 studs (ironically also the exact length of 1999 X-Wing) Now, of course, this doesn't mean this is a bad model. It's so far from a bad model the measuring tape ran out 10 miles ago. The detail and proportionalities are absolutely immaculate. All I'm saying is that it's a bit big, which is a fine substitue for detail.
@adrianrosenlund-hudson8789
4 жыл бұрын
Lovely lovely models. Think I’ll be investing. Oh, and by the by, it’s one FELL swoop, sir, not one foul swoop 😉
@Kolonol1
5 жыл бұрын
To answer your questions, the yellow Y-wing is gold squadron...different squadrons had different colorings ..
@icecorleto3475
5 жыл бұрын
Swooshable
@michaelabrahamt8651
Жыл бұрын
You should make a Clone Wars Y-wing
@lionellines6351
4 жыл бұрын
7:34: Is the “Something out of place” the flag pieces clipped to tiles?
@crook5
3 жыл бұрын
If you buy the thing on your store, does it come with the bricks, or just the instructions?
@jamesmiller7849
5 жыл бұрын
This is the last piece of the rebel fleet I’ve been waiting for
@mattcan9552
5 жыл бұрын
This is awesome. Just wondering, now that you have done almost every ship for the rebels and empire, are u going to do some stuf for the sepratists. Maybe Sith inflitrator :)
@BrickVault
5 жыл бұрын
infiltrator is ambitious man! We are looking towards some of the droids though
@mattcan9552
5 жыл бұрын
@@BrickVault Some of your projects have been pretty ambitious (If the Ghost isn't ambitious then there has never been an ambitious lego project). But if the Sith Infiltrator doesn't work, what are your thoughts on Belbullab-22 starfighter (i.e. General Grievous's EPIC starfighter? :D
@jasonmartin8467
5 жыл бұрын
Amazing work as usual !
@R8ERN8TION52
5 жыл бұрын
What about a V-wing, eta-2 jedi starfighter, delta 7 starfighter, kom’rk class fighter.
@tanner5809
5 жыл бұрын
R8ERN8TION52 I would love to see a minifig scaled eta 2, the play set doesn’t do it justice
@roshango125ab
4 жыл бұрын
I'm saving up for this y wing, maybe next month, I wana see if it's possible to modify it so the astromech sticks out a little farther
@RyanStudios50166
5 жыл бұрын
That looks dope.
@ugh9hohogijpgyo9fo3
5 жыл бұрын
Could you guys do the republic version w/ armor. I think that would be great especially since the new clone wars episodes are coming out. Keep up the good work!
@BrickVault
5 жыл бұрын
That would be awesome :) ultimately Jerac would have to decide on tackling that project or not, but the republic version looks amazing
@BestShifty
5 жыл бұрын
I´d like to see a T-70 in that build quality but I just can´t think of a canopy piece that would fit
@manifestman132
5 жыл бұрын
Damnn do I get the Ghost or these four? Also would love to see a Clone Wars Y-wing maybe customizing this to a Scum color scheme will do.A V-19, V-wing And Z-95 could be cool too in Black Sun colors of course. Also the smaller A5 Juggernaut.
@zicky4896
5 жыл бұрын
You guys could make a rebel fleet out of the Y-wing A-wings and the ghost
@JM64
5 жыл бұрын
Amazing as always can't wait to build
@DavidSanchez-yo9wc
5 жыл бұрын
I’m still waiting for y’all to do a Mandalorian Fang fighter (Protectorate Fang Fighter)
@mattcan9552
5 жыл бұрын
Dang that would be amazing!!!
@Jackman2869
5 жыл бұрын
I honestly like the dark brown pipes.
@The3gg
5 жыл бұрын
Please do Jedi starfighters!
@SaitoGray
5 жыл бұрын
Ok, fine i'll buy it. You're very good at selling stuff. (brown pipe are better, the contrast is more interesting to the eyes.)
@michaelabrahamt8651
3 жыл бұрын
Also can you sell the rare pieces that normal people normally are less likely to have, I am thinking about getting instructions
@thecrimsonchin5512
5 жыл бұрын
Uuh I maybe wrong about this but I think the rebellion intentionally removed the panels near the engines to be fixed faster and I think the caused a lot of drag for the engines
@Scharnvirk
5 жыл бұрын
They did. The ship was also lighter, meaning better acceleration in space.
@lucasley8643
5 жыл бұрын
Sick
@drewcarlson3395
5 жыл бұрын
I need to figure out how to build this on a college student budget I need like 3 of these for my home one moc
@Slender_Man_186
4 жыл бұрын
Is your Home Run moc going to be the length of home base to first base on a football field, or is it just going to be the hangar?
@jamesmiller7849
5 жыл бұрын
They should make a clone wars variant to go with their ark-1-70
@CoffeeMonster12
4 жыл бұрын
Arc-170
@jacobseals7198
5 жыл бұрын
You guys should make Jedi interceptors, like the ones Obi wan and Anakin use in episode 3, I’ve seen some amazing mini fig scale builds for them and I know you guys could do even better, and theirs so many color combos you guys could do with the interceptors for all the different Jedi
@gzuz4148
3 жыл бұрын
I vaguely remember the y wing being a two seater and the cockpit detached from the thrusters
@Epic_donuts
5 жыл бұрын
That is amazing but guys it would be so cool to make a t 70/75 x wing the y wing engines at the end of the ship would be good for the quad engines you could make it in several colors plus Poe's orange and black with a extra build to make his make shift sunlight engine
@george101778
5 жыл бұрын
The panels are gone for easier repair and the ship was slow so it cuts weight
@brimzeex4993
5 жыл бұрын
U guys should make a republic y wing
@Adam-pk1fi
5 жыл бұрын
I feel pearl gold may be a good in-between color for the tubing. Tan looks too pale and brown is too much of a contrast.
@curlytoes1981
5 жыл бұрын
Jarek needs to make a tie striker and a tie reaper
@purplejelly1527
5 жыл бұрын
There is gonna be a day when I save up enough money to buy about half of the brickvault catalog. I hope all of the views me and everyone else give to yall gets you a bit of that sweet youtube money to keep making these awesome mocs!
@Average_GI_Joe
5 жыл бұрын
The bf 110 of starwars
@Lightailing
5 жыл бұрын
Hello brickvault,do you interesting to add light kit for Y-Wing Starfighter?
Пікірлер: 317