Damn, that's fast! Thanks for sharing and I will be back. I hit the bell. Oh yeah... Thanks for your support too!
@brianbaker2484
Жыл бұрын
I'm running the copper head with castle 7700kv on 3s and it's a monster.
@reallythough4591
Жыл бұрын
I'm running same kv and ESC, mines a tp. Any tips to unlock the monster? My numbers don't match my runs, and it's not close. Best I can manage has been 2.92 at 50, but the motor is supposed to be a lot faster. I know the copperhead is made for crawlers, and I wanted the mamba 8s, but the sped guy at shop said do this instead. I'm running about 30mph slow on his setup.
@brianbaker2484
Жыл бұрын
@really though I can't remember the gearing but I was averaging about 65 b4 it would parachute
@reallythough4591
Жыл бұрын
@@brianbaker2484 I started at 90s to 21p. Around 43-46. Went to 86s to 25p 53 at 2.92 on 2s. It should be around 80, and it just isn't getting near that.
@brianbaker2484
Жыл бұрын
I was running 3s with a 100c rate.
@brianbaker2484
Жыл бұрын
Just pay close attention to the Temps because it will over heat
@scottkernan9007
5 ай бұрын
Wow that motor close to 100,000 RPM
@Bakwod
5 ай бұрын
Yeah don’t think I ever really made it past 93k rpm tho 🫡
@NordicBlueRC
5 жыл бұрын
Dang!! that thing flies on the road!
@Bakwod
5 жыл бұрын
alot faster not
@RcFunDrizzy
5 жыл бұрын
Damn nice numbers she looking good 😎👊
@Bakwod
5 жыл бұрын
alot faster now..lol
@jeffbryner5355
4 жыл бұрын
I really didnt know what you were out there doing. Had no idea u were testing until u told me lol
@Bakwod
4 жыл бұрын
lol
@RM-iy7xx
5 жыл бұрын
Awesome and fast
@jlrcmultirotors7288
5 жыл бұрын
Cool and fast 👍
@roadtime5375
4 жыл бұрын
Very quick, I like!
@wellcrc-6703
3 жыл бұрын
On a prepped surface tho. NO PREP IN DA HOUSE!!!!!
@rcaddictgarage
4 жыл бұрын
Just subscribed!
@andresjimenez8207
Жыл бұрын
Is it the same size as the Traxxas slash
@rc4lifebnsf
5 жыл бұрын
Can you help me, the stock plastic hubs just spin on the shaft cuz theres no flat spot on the shaft for the set screw to actually grab it. I need help
@Bakwod
5 жыл бұрын
ull need the alum. ones but if u mke a flat line on whole axle that should help
@kodysmith4834
2 жыл бұрын
I know I'm late, but what brand is that motor? Is it the castle one?
@Bakwod
2 жыл бұрын
Yes 7700 kv on 3s
@kodysmith4834
2 жыл бұрын
@@Bakwod thank you, I ordered it, and I wanted to make sure it was fast lol
@reallythough4591
Жыл бұрын
Running a 7700tp and copperhead, but having trouble getting the speed. Started 86s to 21p, getting around 48-50 2s. New to drag racing, and looking for advice. Swtched to an 80s and 25p as amps were down, and got to 53. Feel like im doing something wrong.i
@Bakwod
Жыл бұрын
What esc and what’s c rating on battery gearing is kinda close
@reallythough4591
Жыл бұрын
@@Bakwod copperhead10 with a 150c 4000mah max amps. I am trying to figure out the programming, but the math says I should be around 80 in 132, and I'm nowhere close. Carbon fiber drag slash.
@Bakwod
Жыл бұрын
O I thought u had an RjSpeed Promod lol..I don’t mess with slashes or traxxas unless it’s for bashing lol
@reallythough4591
Жыл бұрын
@@Bakwod ok, just looking for tips. I'm not a Traxxas or slash, the car is a carbon fiber drag slash. I was looking for tuning tips for the motor(tp) and ESC(copperhead) is fine, I'll find help somewhere.
@rcaddictgarage
4 жыл бұрын
👍
@steveshow84
2 жыл бұрын
What type of tires are you running? I just got mine up and running. I want to switch over to rubber rears not foam.
@Bakwod
2 жыл бұрын
Foam all days baby
@elliottchad4206
4 жыл бұрын
Smokin testin smokin and testin🤣🤣🤣🤣😵😵😵😵😵🤣🤣🤣🤣😆😆😆😆
@vincentfranchino2732
2 жыл бұрын
What gearing u running? I have the 7700kv motor and mamba monster 2 running on 2s. What would be best gearing for drag racing?
@Bakwod
2 жыл бұрын
I think at that time I was 78/29 but now I’m back to 81/29 but I’m on 3s and 4s now 6900kv
@vincentfranchino2732
2 жыл бұрын
@@Bakwod badass man! What gearing do u think would be good on 2s for drag racing?
@Bakwod
2 жыл бұрын
@@vincentfranchino2732 probably the 78/29 but watch ur heat
@dustindelacerda1828
3 жыл бұрын
What motor and esc are you running? That thing is a rocket
@Bakwod
3 жыл бұрын
7700kv mamba X
@vinnie1267
2 жыл бұрын
Can I run my mamba monster 2 with this motor?
@transamcounty5631
5 жыл бұрын
What gearing are you running?
@Bakwod
5 жыл бұрын
secret...spur is stock thats all i can say...
@jdssurf
Жыл бұрын
How do you start a build for one of these? I know it’s not like the no preps
@Bakwod
Жыл бұрын
Gotta control rear steer mostly is the key
@jdssurf
Жыл бұрын
@@Bakwod no I meant do you buy these in kits or do you have do build from scratch……..but now I see you can start with chassis from DRC and such……..
@Bakwod
Жыл бұрын
@@jdssurf kit but the build is all me
@jdssurf
Жыл бұрын
@@Bakwod that’s cool. Yeah I’m just wondering how I could get one started…………..
@terrygamble9895
5 жыл бұрын
I'm in Georgia
@jdawgg504
3 жыл бұрын
How are you able to use 3s, on that high over motor?
@Bakwod
3 жыл бұрын
Gearing and what the temps I have a 9100kv on 3s to
@jdawgg504
3 жыл бұрын
How many runs you get out of it back to back? I just recently purchased one for my bandit vxl just tryna refrain from buying 2s battery. Stock 76 spur?
@Bakwod
3 жыл бұрын
I got 2 years out of that motor and some many passes back to back but always wanted to stay from 170 degrees and higher but the more I got better and so on I started to make a hit and always remember to let the fans do their job
@jdawgg504
3 жыл бұрын
Any gearing vids coming later on for this motor kv?
@Bakwod
3 жыл бұрын
Well because I’m a grudge racer I keep my gearing a secret but it’s over kill trust me lol
@stackzz2444
3 жыл бұрын
what battery do u use?
@Bakwod
3 жыл бұрын
Yoowoo
@giuseppetempera8073
3 жыл бұрын
Complimenti...asc ?
@Bakwod
3 жыл бұрын
???
@giuseppetempera8073
3 жыл бұрын
@@Bakwod che regolatore usi per fare andare questo motore a 3 s ?
Пікірлер: 68