Hey thank you, always fun seeing you doing these technical stuff
@GrownUpGamingGUG
6 ай бұрын
thanks for watching and commenting! :)
@ThePileatedSnagret.
6 ай бұрын
Just updated, Thanks for the help!
@GrownUpGamingGUG
6 ай бұрын
Glad it helped! 😁
@SoundToxin
6 ай бұрын
Since Atmosphere 1.7.0 is still just a pre-release it might be worth waiting a little longer for people who don't have a specific reason (like a new game release that requires newer firmware) to update yet.
@GrownUpGamingGUG
6 ай бұрын
Agree, if you don't have any specific reason, you don't need to update. I just made this video for people have have already updated by accident and also for future games that might need the newer firmware. But also, atmosphere pre-releases are pretty stable per my experience.
@glassby5882
6 ай бұрын
Thanks for the tut homie, most straight forward tut out there
@GrownUpGamingGUG
6 ай бұрын
Thanks for the comment 😌
@axelblitz5284
6 ай бұрын
Very clear instructions, thank you 👍 Updated from Firmware 14.x.x to 18.0.0 with this method on a switch lite (HWFLY Lite) without any major problem. Just a little issue after rebooting in 18.0.0 with this folder -> 420000000007E51A. Solved by deleting it.
@GrownUpGamingGUG
6 ай бұрын
Good job 👍
@familytv1523
5 ай бұрын
BRO U COVERED EVERYTHING THANK YOU
@GrownUpGamingGUG
5 ай бұрын
Thanks for the comment bro 😀
@lisov4575
6 ай бұрын
Thank you so much for this video!
@GrownUpGamingGUG
6 ай бұрын
Glad it was helpful! 😀
@lisov4575
6 ай бұрын
@@GrownUpGamingGUG I have a question please. I have no emuMMC at all because I followed a different guide in the past. It says "disabled". Also I do not need to dump my firmware or copy it to SD card. All I do is go to my sys partition(legit partition) and I update to 18.0.0. Then once I am updated, I enable my DNS to block everythign and enable airplane mode. Finally, I boot into atmosphere from eMMC not emuMMC. Everything seems to work just fine. What am I missing?
@GrownUpGamingGUG
5 ай бұрын
@@lisov4575 if you have sysnand and emunand setup, you can use sysnand to connect to nintendo servers to play online and go to eshop and use emunand for all the modding, play backups, etc. Now since you did all the weird stuff already on sysnand, if you connect to nintendo servers you'd probably get banned.
@marcushalupczok5436
6 ай бұрын
Just updated all working fine thanks 👍👍👍💪💪😄
@GrownUpGamingGUG
6 ай бұрын
Great 👍
@danielcharnley7060
4 ай бұрын
I've updated to 18.0.0, everything went ok. However some games when I load come up with Could not start the software. Any ideas why that's happening?
@GrownUpGamingGUG
4 ай бұрын
Sure thing sigpatches are updated?
@irvinjeo
Ай бұрын
@@GrownUpGamingGUG how can i get the latest sigpatches?
@JPOrtiz831
27 күн бұрын
Theres an app called sigpatch updater
@durnanihat
6 ай бұрын
Thank you very much for this video. My son Updated his switch 2weeks ago and he cant Play since then. I will follow the steps. We’ll see if it will work for me
@GrownUpGamingGUG
6 ай бұрын
Good luck 🤞
@robotnic90
6 ай бұрын
Thank you for this tutorial. I would like to ask if the tesla/edizon overlay cheat still works on this version of atmosphere/firmware? thank you so much, you just earned another subscriber
@GrownUpGamingGUG
6 ай бұрын
I don't use that so I'm not really sure. Normally does that app need to be updated when a new firmware comes out? Because apps like daybreak, jksv, tinfoil which I use doesn't need updating often and work fine mostly.
@robotnic90
6 ай бұрын
Nope it doesnt need updating every firmware update but i had trouble making it to work during my last firmware update. Hopefully it would still be working after this update. Thanks 🙏
@luibee2338
21 күн бұрын
Do we have to update the original firmware first before dumping it? My original fw is 15.x and in my CFW, it says 16.1.0 | AMS 1.6.1. Thank you.
@GrownUpGamingGUG
21 күн бұрын
Yes it will dump whatever firmware you have.
@alexrio4806
3 ай бұрын
Great tutorial, thanks for sharing! Question for you…. Would these steps work if you already updated (accidentally) the official firmware on a hacked Switch?
@GrownUpGamingGUG
3 ай бұрын
Yes make sure you have the latest atmosphere, fusee.bin, Hekate and sigpatches on your SD card.
@alexrio4806
3 ай бұрын
@@GrownUpGamingGUGthank you! I’ll give it a shot this week!
@GrownUpGamingGUG
3 ай бұрын
Good luck 🍀
@aamalgamm
4 ай бұрын
I have a banned switch and I'm trying to play "legally acquired" games, but when I try to launch them, it still says that use of online services is restricted (doesn't work on airplane mode either). I installed the sigpatches but still nothing seems to work.
@GrownUpGamingGUG
4 ай бұрын
I'm not sure about that as my switch isn't banned but I can think of a solution, dump your legit game and play it as a backup on cfw.
@A-Dot-k6d
4 ай бұрын
Great video but noticed you didn't mention what to do with the fusee.bin file unless I missed it?
@GrownUpGamingGUG
4 ай бұрын
Replace the old one. Fusee.bin is the payload needed to boot into atmosphere.
@danielwick6088
5 ай бұрын
My Firmware is on 16, can I update straight to 18 without going thru the other updates 1st ? Might be a Noob question, but its been awhile since I modded mine.
@GrownUpGamingGUG
5 ай бұрын
Yes you can just update directly to 18.0.0.
@danielwick6088
5 ай бұрын
@@GrownUpGamingGUG thanks for ur fast replay, much appreciated.
@GrownUpGamingGUG
5 ай бұрын
You're welcome 🤗
@abiyosoariobimo4317
6 ай бұрын
Thank you for the tutorial! Since i dont have PC, can i do this without injecting tegrarcm on PC? (Just copy the atmos, hkt, signpatches etc and then switch sdcard to n.switch again) thank you
@GrownUpGamingGUG
6 ай бұрын
When you restart the switch you need to inject payload. You can use you phone with usb-c cable to connect switch to do it. There are apps for android and iOS to inject payload.
@ronaldchannel
4 ай бұрын
Just managed to install Hekate but Ben I go to payload it says select the payload and there are 5 side options. Which one have to select?
@GrownUpGamingGUG
4 ай бұрын
I normally just use fusee.bin payload to launch atmosphere.
@EdwardInTX
Ай бұрын
Went from 16.0 to 18.1.0, atmos 1.7.1, hekate 6.1 to 6.2.1 with this method just fine
@GrownUpGamingGUG
Ай бұрын
@@EdwardInTX great 👍
@JAlcatraz
2 ай бұрын
you can skip the rcm jig part by moving your fusee bin file to bootloader/payloads folder
@GrownUpGamingGUG
2 ай бұрын
@@JAlcatraz thanks for sharing 👍
@JAlcatraz
2 ай бұрын
@@GrownUpGamingGUG you might want to edit the first part of this video so that people know they need a jig for this update.
@GrownUpGamingGUG
2 ай бұрын
@@JAlcatrazthis is an update cfw video. People should have install cfw and already have a jig. They can also enable autoRCM which won't require the jig. kzitem.info/news/bejne/yqdpnqKcjIxzh2U here's a video how to install cfw on an unpatched switch with a jig.
@petertelinde130
21 күн бұрын
I have not played my Switch in ages, I am still on firmware 9.0.1 and Atmosphere 0.9.4 on emunand. Can I just follow your instruction to update to latest versions or will this cause issues as my Switch is still running on old software? Must I update to previous versions first?
@GrownUpGamingGUG
21 күн бұрын
@@petertelinde130 you can update directly. Depending on when you are watching, just make sure atmosphere and Hekate supports the latest firmware before doing anything.
@petertelinde130
21 күн бұрын
@@GrownUpGamingGUG Thank you for your reply, I will follow your advise, hopefully I will be playing switch soon again
@GrownUpGamingGUG
21 күн бұрын
Good luck 🍀
@hugozelada2769
20 күн бұрын
Is there a reason for updating? Ive been curious as Ive dug out my old swtich and wonder if its neseccary
@Drew84z
6 ай бұрын
I got a fatal error from fuse and now it won't power off into stock
@GrownUpGamingGUG
6 ай бұрын
Mostly likely your files aren't good. Make sure atmosphere, Hekate, payload and sigpatches are updated and correct version. if you updated Atmosphere you need to use the new fusee.bin payload. To power off, hold the power button for like 20 seconds.
@Drew84z
6 ай бұрын
@@GrownUpGamingGUG I did, but it's not powering off , it's stuck in atmosphere
@Drew84z
6 ай бұрын
If you have time later boss maybe you can walk me through it
@Drew84z
6 ай бұрын
@@GrownUpGamingGUG are you on discord or tele?
@GrownUpGamingGUG
6 ай бұрын
my discord info is in the description.
@albertbernal7434
Ай бұрын
I’m on hekate v6.2.1 when I install games they boot but crash “ software closed because of an error “ will sigpatches fix this ???
@GrownUpGamingGUG
Ай бұрын
Yes seems like you need updated sigpatches.
@ElmoWatchesWrestling
4 ай бұрын
Hi again, have you updated to 18.1 yet? I did, and some of my games work while others don’t. Do you think that’s because SigP’s aren’t 18.1 yet?
@GrownUpGamingGUG
4 ай бұрын
I haven't updated. But yes you need updated sigpatches.
@ElmoWatchesWrestling
4 ай бұрын
Ohkay cool, I’ll wait :)
@GrownUpGamingGUG
4 ай бұрын
@@ElmoWatchesWrestling no need to wait, go find the updated sigpatches.
@ZekeAbog-z6c
12 күн бұрын
What if you dont have a hekate installed in switch? What payloaf to use in tegrarcm?
@GrownUpGamingGUG
12 күн бұрын
@@ZekeAbog-z6c fusee.bin payload directly loads into atmosphere.
@young_Kev
5 ай бұрын
If I have a partitioned Android OS on the SD Card will updating the firmware erase that? (Selecting FAT32 + exFAT to install firmware)
@GrownUpGamingGUG
5 ай бұрын
No it doesn't affect your other partitions.
@iRaven-_-
6 ай бұрын
how can we use wifi/tinfoil without getting bsnned. *NO 90 DNS* its know to get you banned.
@GrownUpGamingGUG
6 ай бұрын
You can manually set the DNS in your internet settings to block Nintendo servers.
@muhammadluqmanmasrulfaidz737
5 ай бұрын
What about exosphere
@Chintaque
6 ай бұрын
hi just wondering after update to 18.0 when boot to custom firmware my current version is under 17.0.1 AMS 1.7 OE
@GrownUpGamingGUG
6 ай бұрын
Did you use daybreak to update the firmware?
@BazZx
4 ай бұрын
i have a v2 and after updating everthing, it goes to hetake and goes to a black screen, the athmosphere logo dosent show up, what should i do?
@GrownUpGamingGUG
4 ай бұрын
Did you get the latest fusee.bin that matches the version of your atmosphere?
@BazZx
4 ай бұрын
@@GrownUpGamingGUG yep, i thought i did, my fix was to delete the whole content and atmosphere folder of the SD card and just drag and drop the new ones, and it booted just fine
@GrownUpGamingGUG
4 ай бұрын
Great 👍
@forestlink6673
2 ай бұрын
I wonder why when I open daybreak it's still 17.0 even if I replace it firmware 18
@GrownUpGamingGUG
2 ай бұрын
Maybe you got the wrong files?
@jeansdfsdrsr-vv5ts
6 ай бұрын
Hi, first thanks for this video :) Do I need to update my ofw and then dump it before following those steps?
@GrownUpGamingGUG
6 ай бұрын
kzitem.info/news/bejne/wH98yoiCipN0o34 yes you can follow this video to dump your firmware.
@jeansdfsdrsr-vv5ts
6 ай бұрын
@@GrownUpGamingGUG cheers, so I just need to boot on my ofw, update the switch normally and then follow the step in your video to dump the firmware, that's nice and easy :)
@TheDorianTube
3 ай бұрын
I stopped using my jailbroken Switch for a long while. I'm still on HOS 13.1.0 (or 13.0.1), with Hekate 6.2 and an old Atms. I lost my old payload and now I can't enter my console anymore (I get a ''update your bootloader error, old Nyx Gui'') when going Launch -> Sysmmc My Question is, should I update my console to 18.0.1 and update following this video?
@GrownUpGamingGUG
3 ай бұрын
I would get the latest atmosphere, fusee.bin, Hekate and sigpatches and put them on your SD card and inject fusee.bin payload.
@TheDorianTube
3 ай бұрын
@@GrownUpGamingGUG So just a drag and drop operation, no need to follow this video. Thanks
@GrownUpGamingGUG
3 ай бұрын
@@TheDorianTube this is video is for updating cfw. You want to get yours working first.
@TheDorianTube
3 ай бұрын
@@GrownUpGamingGUG Thanks
@TheDorianTube
3 ай бұрын
Back again to tell you that everything works, everything is updated, the patches work, everything is perfect. MVP, thanks
@ElmoWatchesWrestling
5 ай бұрын
Hi sir. Which folder do you copy fusee.bin to in the Switch SD card?
@GrownUpGamingGUG
5 ай бұрын
I put it in the bootloader/payloads directory.
@ElmoWatchesWrestling
5 ай бұрын
@@GrownUpGamingGUG🙏
@relaxwithvito6804
4 ай бұрын
I'm on 17.0.1 and would prefer to stick there. Am i missing somthing from the version 18?
@GrownUpGamingGUG
4 ай бұрын
You're watching this video, deep down you want to update 😂 jokes aside, if the games you are playing works then there's no need to update imo.
@relaxwithvito6804
4 ай бұрын
@@GrownUpGamingGUG Haha! xD thanks buddy!
@Cyberbrickmaster1986
6 ай бұрын
It would be nice if II could update the firmware on Suyu. Getting the firmware isn't the problem for me, it's trying to install it into the emulator that I'm having trouble with.
@GrownUpGamingGUG
6 ай бұрын
What's the issue?
@Cyberbrickmaster1986
6 ай бұрын
@@GrownUpGamingGUG Trying to work out how to set up the firmware in Suyu.
@GrownUpGamingGUG
6 ай бұрын
kzitem.info/news/bejne/0oehmKWHn5uUn44
@Cyberbrickmaster1986
6 ай бұрын
@@GrownUpGamingGUG Nevermind. Suyu is dead now and it looks like I'll have to go with Ryujinx, depending on what happens with Sudachi.
@МихаилКазанцев-г9ч
4 ай бұрын
how did you log into hbmenu, is nothing working for me?
@GrownUpGamingGUG
4 ай бұрын
kzitem.info/news/bejne/yqdpnqKcjIxzh2U this is a more in depth guide for switch modding, hope it helps you.
@ReyKaf
4 ай бұрын
Are sigpatches and prod keys different? If so, what are their differences?
@GrownUpGamingGUG
4 ай бұрын
Yes they are different and I only know you need to have both of these files else the emulator will not be able to play your backup games.
@ReyKaf
4 ай бұрын
@@GrownUpGamingGUG so i needed the sigpataches if i have a modded switch then prod keys for emulators?
@GrownUpGamingGUG
4 ай бұрын
@@ReyKaf sorry I got confused. Prod keys are from your switch already and you need to dump it if you want to play on an emulator. Sigpatches are needed if you want to play backups on your modded switch.
@ReyKaf
4 ай бұрын
@@GrownUpGamingGUG ow ok thanks. I've only known prod keys. Will try updating my 17 to 18 tonight. Thanks!
@ReyKaf
4 ай бұрын
@@GrownUpGamingGUG just wanted to ask another one. Mine's a lite. I've already put everything on my sd card and is in the process of tegraRCM. But when I turn on the switch, tegra won't detect the device. What am I doing wrong?
@FunntimeButInVR
6 ай бұрын
Hi, do you know a way to get Suit adder or overstrike on Marvel’s Spider-man remastered?
@GrownUpGamingGUG
6 ай бұрын
Mods you mean?
@FunntimeButInVR
6 ай бұрын
@@GrownUpGamingGUG yeah their mods to add new suits and a few other stuff. Overstrike is a mix between suit adder and smpc modding tool
@GrownUpGamingGUG
6 ай бұрын
kzitem.info/news/bejne/qn1-zpNmkaqYa4Y I normally use vortex mod manager to install and manage my mods.
@Mr321peace321
3 ай бұрын
After updating will there be more games to download ? Because I can not find Princess Peach
@GrownUpGamingGUG
3 ай бұрын
I didn't understand your question.
@Mr321peace321
3 ай бұрын
@GrownUpGamingGUG sorry, ok so I'm not on the latest upgrade so I'm wondering what will this update makes ?
@GrownUpGamingGUG
3 ай бұрын
@@Mr321peace321 you can read the update patch notes here en-americas-support.nintendo.com/app/answers/detail/a_id/22525/~/nintendo-switch-system-update-information
@ging4157
5 ай бұрын
why did you not put the fuuse bin in the switch sd card?
@GrownUpGamingGUG
5 ай бұрын
So I can load into atmosphere with Hekate or tinfoil when I soft reboot.
@HalmyAfrialKhozaldy
5 ай бұрын
Do we have to update on ofw aswell or its enough to only update directrly on cfw?
@GrownUpGamingGUG
5 ай бұрын
It's up to you really. Normally you would update ofw as you need to play online or go to the Nintendo store. Cfw you only need to update when the game you want to play needs the update.
@HalmyAfrialKhozaldy
5 ай бұрын
@@GrownUpGamingGUG okay so if i want to update ofw just click on update firmware is enough? , thanks for the answer anyway
@GrownUpGamingGUG
5 ай бұрын
@@HalmyAfrialKhozaldy yup 👍
@JosePerez-uq8zz
6 ай бұрын
Please help us run spider man 2 on steam deck I've seen people run it but can't figure it out 😞
@GrownUpGamingGUG
6 ай бұрын
You want my channel to disappear?
@JosePerez-uq8zz
6 ай бұрын
@@GrownUpGamingGUG sorry I didn't meant no harm 😞
@GrownUpGamingGUG
6 ай бұрын
It's a leaked game, putting it on KZitem isn't a good idea 😅
@Alucardpred
5 ай бұрын
I updated everything but still tinfoil says unable to start software, installed latest sigpatched, deleted tinfoil reinstalled but still same, all games work but tinfoil doesn’t, any tips ?
@GrownUpGamingGUG
5 ай бұрын
Last time that happened to me I updated the sigpatches to match the firmware and it worked for me.
@Alucardpred
5 ай бұрын
@@GrownUpGamingGUG unfortunately id didn’twork, i got the sigpatches 56kbs, multiple sources same, got another one 56,4 i think, im on 18.0.0 not 18.1, guess im stuck ? Should i do a fresh start ?
@GrownUpGamingGUG
5 ай бұрын
Yeah fresh start is what I would do.
@Alucardpred
5 ай бұрын
@@GrownUpGamingGUG fixed, weird but i launched to hetake instead of just injection fusee, after reboot it worked like a charm, now i know something more 😅
@GrownUpGamingGUG
5 ай бұрын
@@Alucardpred so probably your payload (fusee.bin) isn't updated to support your updated atmosphere.
@James10113520
5 ай бұрын
Do I have to update the firmware as well for the sigpatches to work?
@GrownUpGamingGUG
5 ай бұрын
Yes
@anthonybacha2521
Ай бұрын
Any idea how to get ghost shop to work? Ive put it in the right details for file browser but still no resolution. Ive also updated atmosphere and sigpatches
@GrownUpGamingGUG
Ай бұрын
Nope 😱
@anthonybacha2521
Ай бұрын
@@GrownUpGamingGUG I wasn't connected to wifi lol it works now
@GrownUpGamingGUG
Ай бұрын
Lol 😂
@BigLee81
5 ай бұрын
What is the difference between Launch in cfw( sysmmc) and cfw(emummc) ?
@GrownUpGamingGUG
5 ай бұрын
I'm not entirely sure but I only use cfw on emunand for backups, save edits, mods, etc. and I use the sysnand stock for online legit stuffs.
@napoleonhartoyo541
4 ай бұрын
@@GrownUpGamingGUGdo we need to do this too? For updating synand fw or just directly update it from the settings
@KSChin
6 ай бұрын
Thanks for the tutorial. I am using a RCM loader. Any file I need to update in the RCM loader? Appreciate your advice.
@GrownUpGamingGUG
6 ай бұрын
Make sure the payload is up to date I guess 😉
@KSChin
6 ай бұрын
Thank you
@villain_devious
6 ай бұрын
for some reason my games wont work at sysMMC, on the other hand, emuMMC is running normaly. Do you know what i could be missing to make it work? i kinda wanna play pokemon unite XD when i try to open pokemon unite is fails as if it didnt have internet, youtube wont load, pokemon violet freezes the console, could this be related to the sigpatches? i did put them on the sdcard tho so idk
@GrownUpGamingGUG
6 ай бұрын
what do you play on sysMMC? legit games or backups?
@villain_devious
6 ай бұрын
@@GrownUpGamingGUG legit games, i never used mods or pirated games there, im having to boot normaly to play the games, which is a bit annoying cuz i need to boot payload every time i want to play on emuMMC
@GrownUpGamingGUG
6 ай бұрын
So you can't play your games on atmosphere sysmmc? Most likely you need updated sigpatches.
@villain_devious
6 ай бұрын
@@GrownUpGamingGUG yeah i thought so too, maybe i somehow got the wrong sigpatches, ill try to update them.
@GrownUpGamingGUG
6 ай бұрын
But you shouldn't use cfw on sysmmc. Keep all that on emummc.
@djpansetasthegreat2560
5 ай бұрын
can i upgrade my CFW when i have version 15.0.1 ? I mean, you had 17 at the beginning
@GrownUpGamingGUG
5 ай бұрын
Yes you can directly upgrade from a lower version.
@djpansetasthegreat2560
5 ай бұрын
@@GrownUpGamingGUG thanks mate.. also, i am a little confused about how can i get the folder 'Firmware 18.0.' that you already have... My nintendo's SD cad has a folder Firmware with many .NCA files..
@GrownUpGamingGUG
5 ай бұрын
You're supposed to dump your own firmware kzitem.info/news/bejne/wH98yoiCipN0o34
@EazyDel
5 ай бұрын
Hello, if you can help me too, I would be grateful. When I try to enter CFW (emuMMC), I get this error '' emuMMC is forced but not enabled! Failed to lounch HOS! Press any key'' I did exactly as it is in the video. And if I try to enter CFW (sysMMC) I get this error '' A fatatl error occurred when running Atmosphere. Program ID: 0100000000000005. Error Desc: stf::abort() called (0xffe). If I want to give it a normal boot without RCM, only the Nintendo logo appears and then it stops. Any help will be helpful, Thanks!
@GrownUpGamingGUG
5 ай бұрын
Make sure atmosphere, hekate, sigpatches and payloads are all updated. Maybe format the SD card and start fresh if all fails.
@EazyDel
5 ай бұрын
@@GrownUpGamingGUG no work.. also formatted the card :(((
@GrownUpGamingGUG
5 ай бұрын
Can you boot into stock firmware?
@EazyDel
5 ай бұрын
in Atrmosfere, Yes
@EazyDel
5 ай бұрын
@@GrownUpGamingGUG otherwise it does not open... only in Atmospheres
@doriabs
6 ай бұрын
Hi! I accidentally updated my sysCFW to 18.0.0. I have a modded switch OLED, is this tutorial valid for an OLED as well or should I skip any steps ? Also I don’t want to update my emuNAND to 18.0.0 as it still is on 17.0.1. It’s just my sysCFW that no longer works. Do I still need sig patches as well? Sorry if it’s a lot to ask, I’m really a noob 😅 I paid to get my switch modded and I only know the basics. Thank you !
@GrownUpGamingGUG
6 ай бұрын
Yes you should get the latest atmosphere and Hekate files and put them on the SD card.
@doriabs
6 ай бұрын
@@GrownUpGamingGUG thank you for your answer. Just to make sure, do I also need to inject the payload ?
@GrownUpGamingGUG
6 ай бұрын
Yes you do
@villain_devious
6 ай бұрын
were you able to fix your problem? i also updated to 18.0.0 and did the steps on the video but my games on sysCFW/sysMMC dont load after i open them (some say i dont have connection, some stay black screen, some straight away freeze my switch(looking at you pokemon violet))
@youssefyouss9369
6 ай бұрын
Hey bro my atmosphere js running slow when i start a game the loading time is slow i did everything
@GrownUpGamingGUG
6 ай бұрын
Running slow compared to previous firmware? I don't feel any difference between loading time between different firmware versions.
@youssefyouss9369
6 ай бұрын
No bro only when i start games and sometime it crash i get a blue screen
@GrownUpGamingGUG
6 ай бұрын
@youssefyouss9369 your emunand is on SD card right? I think you should reinstall it, that's what I would do.
@Deltronzer0o
6 ай бұрын
HELP! I dont have the option to pick CFW (emummc)
@GrownUpGamingGUG
6 ай бұрын
Do this kzitem.info/news/bejne/yqdpnqKcjIxzh2U
@plattenbaukind88
6 ай бұрын
did everything like in this video updated via daybreak and now im getting this error [unknown pks1 version, hos version not supported]
@GrownUpGamingGUG
6 ай бұрын
I think the key is to make sure atmosphere, Hekate, payloads, sigpatches and firmware are updated and correct.
@plattenbaukind88
6 ай бұрын
@@GrownUpGamingGUG im pretty sure I did everything right but now I’m stuck on a yellow screen 🤷🏻♂️. I was on 1.16 and tried to update for data transfer and yeah
@GrownUpGamingGUG
6 ай бұрын
1.16 of what?
@plattenbaukind88
6 ай бұрын
@@GrownUpGamingGUG firmware before. But I already fixed it ❤️. Switch cfw is so complicated, I was on Xbox and ps3 before and that was easy but switch is kinda hard 😂.
@GrownUpGamingGUG
6 ай бұрын
@@plattenbaukind88 tell us what you did to fix it.
@chocapic8031
9 күн бұрын
Can i remove my sd on the hekate menu or i have to power off my switch ?
@GrownUpGamingGUG
9 күн бұрын
I haven't tried that. Why do you need to remove SD card in Hekate menu?
@chocapic8031
9 күн бұрын
@@GrownUpGamingGUG my computer doesn't want to read the sd card on the hekate menu and i don't want to power off my switch
@GrownUpGamingGUG
9 күн бұрын
@@chocapic8031 don't know what you're trying to do 🤔
@chocapic8031
8 күн бұрын
@@GrownUpGamingGUG i just want to know if i can remove the sd card of my switch when i m on the hekate menu
@GrownUpGamingGUG
8 күн бұрын
@@chocapic8031 I've not tried that so I'm not sure.
@igormilosevic6576
5 ай бұрын
I have a switch oled with chip, whit ofw 16 and atmosfere 1.5.4. Can i use this tutorial to update everthing? Thanks in advance!
@GrownUpGamingGUG
5 ай бұрын
Yes, just make sure you're familiar with it and comfortable. make backups in case you mess anything up.
@igormilosevic6576
5 ай бұрын
@@GrownUpGamingGUG Thank you!
@DJxDJ1997
4 ай бұрын
Did you do it? I thought OLED switched didn't work with tegra
@James10113520
5 ай бұрын
Link for the sigpatches ?
@GrownUpGamingGUG
5 ай бұрын
No links provided
@Evade_pro12345
20 күн бұрын
How can i put my nintendo easy pls cuz i dont have sd card
@GrownUpGamingGUG
20 күн бұрын
Doesn't the switch come with a SD card?
@Evade_pro12345
20 күн бұрын
@@GrownUpGamingGUGI still didn't buy sd card
@GrownUpGamingGUG
20 күн бұрын
Ok you do need an SD to soft mod the switch.
@shadowmorgana
Ай бұрын
what is sigpathces? can you plese explain
@GrownUpGamingGUG
Ай бұрын
They are needed when a new firmware comes out else your games won't load. That's all I know and need to know 😆
@therealseanmay
4 ай бұрын
there is no firmware directory
@GrownUpGamingGUG
4 ай бұрын
Create it and put the firmware files inside.
@jayronaratan5550
3 ай бұрын
Do i need Rcm jig ? sorry im new here
@GrownUpGamingGUG
3 ай бұрын
You need a jig if you are using a v1 unpatched switch and need to go into RCM. Or you can set autoRCM and never need to use a jig again.
@Littlemisshelper
2 ай бұрын
Buddy u need to replace all the files in firmware folder because if u don't the new update won't show in daybreak, also I don't get it when u said firmware download is illegal and u need to dump ur own because jailbreak is already piracy 😮
@GrownUpGamingGUG
2 ай бұрын
I'm sure sharing or using other people's firmware is illegal but rooting/jailbreaking/modding devices is not per my understanding. If you do it to play illegally obtained apps then that's illegal. That's my understanding only, not legal advice.
@JoiMarcel
6 ай бұрын
Request ,instal file cfw Nintendo switch lite, after use chip please
@GrownUpGamingGUG
6 ай бұрын
Sorry I don't have a switch lite with a mod chip installed.
@西倉学-g2v
6 ай бұрын
Does it work 18.0,1?
@GrownUpGamingGUG
6 ай бұрын
You need to wait for Atmosphere/Hekate to support the new version. Don't update yet until they are supported.
@西倉学-g2v
6 ай бұрын
@@GrownUpGamingGUG Ok,Thanks.
@brich649
4 ай бұрын
i like it
@GrownUpGamingGUG
4 ай бұрын
I like it too 😊
@西倉学-g2v
5 ай бұрын
Is it online?
@GrownUpGamingGUG
5 ай бұрын
Is what online?
@GrownUpGamingGUG
5 ай бұрын
Can you elaborate the question? I don't know what you are trying to achieve or ask actually.
@西倉学-g2v
5 ай бұрын
@@GrownUpGamingGUG Sorry for being late to the question 😣 I just forgot to send this comment 😢 Online means connected to the Internet
@西倉学-g2v
5 ай бұрын
@@GrownUpGamingGUG Excuse me for asking. Does this use the internet?
@GrownUpGamingGUG
5 ай бұрын
You don't need to be online or connected to update but some tools required needs to be downloaded from the internet if that's what you are asking.
@jensenjohnson
3 ай бұрын
One download link please
@GrownUpGamingGUG
3 ай бұрын
Google is your friend.
@rainophile
10 күн бұрын
Hello sir, i Did everything and everything is in its place but when i press on " Atmosphere FSS0 emuMMC " to launch; it tells me that the PKG1 version is unknown and that the hos is non supported. Please reply to me and help me if you know what should i do.
@GrownUpGamingGUG
10 күн бұрын
What step are you on?
@rainophile
10 күн бұрын
@@GrownUpGamingGUG launching the Atmosphere
@GrownUpGamingGUG
10 күн бұрын
@@rainophile you updated the firmware of cfw and now you can't boot into cfw?
@GrownUpGamingGUG
10 күн бұрын
@@rainophile do you have emunand?
@rainophile
10 күн бұрын
@@GrownUpGamingGUG I don't know I just followed the NH tutorial, is it where they ask you to make backup then transfer it to PC then delete it from Switch?
Пікірлер: 272