Hey, great job. We have *all* misdiagnosed problems. You kept your cool and continued to use your brain to solve the problem. That's the best lesson any DIY mechanic can learn. Patience and persistence will always win the day!
@jacquelineblake759
2 жыл бұрын
I have a 2001 Altima that needs a new water pump. You were up front and honest as well as a good teacher. Thank you. I'm going to remove my nails and get busy. Save myself some dollars.
@50sKid
2 жыл бұрын
Lol nice!
@MikeisonaMission
8 жыл бұрын
Just a quick note to thank you so much for the video! My daugther's altima needed a new power steering pump, and your video was so helpful! No way I could have done the job without your video. Thank you so much!
@50sKid
8 жыл бұрын
+Mike Falkenstine You're very welcome, Mike. Thanks for watching.
@artie2099
Жыл бұрын
Thank you soo much! Very clear instructions. I am replacing multiple hoses that are all slightly leaking. I needed to know the bolt size and hose sizes which you shared! Thanks again, take care!
@stevetarbill7211
3 жыл бұрын
I was struggling to install the power steering pump on my Nissan Frontier. It just wouldn't fit in the bracket. Then I saw how your bracket comes off with the pump and you knocked back that fitting in the bracket. The bracket on the Frontier won't come off without a whole lot off trouble. But I was able to knock that fitting back and the pump slid right in. Your video was much appreciated. Thank you!!!
@robertcristando8007
9 ай бұрын
Thanks for the info on replacing the pwr steering pump, I’m sorry that wasn’t your issue. Replace the return and feed lines along with the clamps and put a magnetic filter on the return line to capture all the metal and rubber particles floating around from the failed power steering pump.
@johngj2245
7 жыл бұрын
Thanks for the video. I am better off before trying out some repairs. I appreciate your being real and showing some of the mistakes that we make because we learn from them.
@50sKid
7 жыл бұрын
Thanks for saying that!
@josemedina4768
8 жыл бұрын
It was a very good video on how replace the power steering pump, very detailed.
@50sKid
8 жыл бұрын
Thanks!
@Flipstylee6
7 жыл бұрын
Having the same issue, did the water pump and idler pulley recently, thanks for not cutting the video up because i was about to spend serious $ on a PSP and now i'm going out to re-check this stuff i did!
@rediranch
6 жыл бұрын
Your video saved me a lot of headaches. I was going by my trusty Haynes manual which let me down on this instance. Thanks for taking the time to video and post.
@sarahjones4311
2 жыл бұрын
Amazing video! At the very least, I have three easier things to troubleshoot before I try to replace the power steering pump! Thanks for posting!
@msdzappa4701
Жыл бұрын
Dont be so hard on yourself, the fact is that Nissan's design for a simple damn power steering pump is the worst I have ever had to deal with - it completely sucks. Anytime there is noise like what you heard that made you think the PS pump was the source, take a stethoscope and put it on all the pulleys that is how to find any high pitch whine - PS pump should only be replace if its leaking or the pulley is warped. Again thanks for the video very helpful.
@flakdawg
7 жыл бұрын
Thanks for sharing. Very humble and helpful. I'll be doing mine on an 05 Altima 2.5L soon.
@BadManTingYuhzeet
5 жыл бұрын
Dude you are amazing 🙌🏾 I love the transparency. The absolute best yo.
@12vgs8606
9 жыл бұрын
You may not know, but I really appreciated your candor and the video. Don't let a lowly Altima beat you :-)
@50sKid
9 жыл бұрын
12vgs8606 Thank you, that means a lot! ;-)
@AntonioSanchez-pm4ps
Жыл бұрын
I think you did good, no worries you tried and did a good presentation!
@jasonguthrie5099
Жыл бұрын
Thank you . I have a way different bracket then yours though I was still able to follow your instructions your top valve cover gasket is metal mines plastic I had no idea they made a chrome valve cover for the altimas I just replaced mine I would have ordered one of those instead . 😮
@simplybeanjelly
7 ай бұрын
Lol, you have an Altima with a 2.5l engine this video is for the older 2.4l Altima.
@teachingherbs6300
4 жыл бұрын
Thanks for this video. Very informative. Thank you for leaving in all the footage. Your videos are very good. Keep up the good work.
@jayward7536
8 жыл бұрын
mines leaking and this vid still helped good job man
@50sKid
8 жыл бұрын
+Jason Ward excellent
@mr.horse1801
4 жыл бұрын
Regardless you showed how to replace the pump which was very helpful.
@carlostejeiro7855
8 жыл бұрын
congratulations! it is a very good and helpful video, I learned a lot from it.
@mikeautostudent5562
7 жыл бұрын
thank you very much for your time and honesty.very informative video.
@hubertvale5132
4 жыл бұрын
Thanks for convincing me this job is beyond my skills. I’ll leave it to my mechanic.
@omaharmontano5891
6 жыл бұрын
awesome video 🎥 you showed everything to diagnose the source of the noise. im about to do my friends powersteering pump and hoses your video help me get a whole total layout of his car engine. ive done worked on mostly GM Vehicles and today was my first Nissan/Infiniti DIY thank you for this awesome vid. p.s next time you work on a power steering pump when you bleed the system out keep the engine running while you steer to lock in both directions . do u it about 3-4 times each way or enough to make the noise to disappear.
@kamalabbady6778
4 жыл бұрын
Thank you so much I was able to do mine watching this video
@rudymartinez5937
5 жыл бұрын
hello. I need your help please. I have Nissan Altima 1999 it sounds very strong when it starts and when I turn and turn on the bat light f Emo hand and I changed the hydraulic pump only q I put a used and remains exactly the same. What do you recommend? Thank you
@hugoperez8474
5 жыл бұрын
Thanks for the video is really helpful no matter what is really helpful everybody make mistake all is human no vary perfect thanks
@MahdiBanners
2 жыл бұрын
Thanks. I learned a lot from this video
@jrock019770
4 жыл бұрын
The detail on this vid is nothing short of spectacular. Other vids are a lil vague but still helpful. You vid is on point. Couple questions, what year is your Nissan? Is the same bracket on a 2009 Nissan Altima 2.5s. ?
@AntonioSanchez-pm4ps
Жыл бұрын
I know there's different generation on altimas good question
@ralphreyes2440
8 жыл бұрын
Another question I bought this certified 2011 toyota camry last year. And I have noticed that if I step on the brakes downhill I can feel a vibration. But if it's driving on plain road and uphill there is no issue. Is this a cause for concern? please advice thank u!!
@ralphreyes2440
8 жыл бұрын
Thank u!!! cause, the Mechanic said both power steering pump and hose needs to be replace.
@50sKid
8 жыл бұрын
Does the power steering work if it has fluid in it? Then it don't need to be replaced. Especially if it's not making strange noises.
@ralphreyes2440
8 жыл бұрын
Correct the reservoir barely gets low and no squeaking sound on the pump. That is why I was in doubt when the Mechanic told the power steering pump needs to be replace as well.
@BryanGarcia-dy5vx
7 жыл бұрын
hello my power steering pump dont have the pressure sensor where the green cable go.?
@kingiam4407
Жыл бұрын
Great video!
@charliecharlie9787
2 жыл бұрын
My 2001 wines for a few minutes at start up but goes away no loose lines or leaks . Guess I will check the lower clamps and spray the tension pulley. The oil is 20k miles old
@leeDs718
5 жыл бұрын
i think i have to go to the shop to get this replaced. do you know what parts are needed for a replacement power steering pump? would i also need to get a new reservoir and power steering rack? or are there more things needed for the replacement?
@ThothTheAtlanteanK
4 жыл бұрын
You're right the first time. Nissan's really test your tool set!😅
@ClassicJunk88
6 жыл бұрын
I thought my power steering pump was going out, it just turned out to be my AC idler pulley! so damn relieved. it sounded just like a pump it was strange!
@Thefreemans-interesting-music
3 жыл бұрын
Where a stethoscope pays for itself. (or a long screwdriver) Feel ya pain mate, those noises are hard to isolate when they are down in the boondocks.
@a.lumberjack4456
7 жыл бұрын
great video. from beginning to end.
@bugzie706
8 жыл бұрын
good video and camera work, if there is a noise I like to spray the pulleys with lube and see if the noise goes away , this may help u to pinpoint things next time, also take 1 belt off at a time and see if the noise stops
@50sKid
8 жыл бұрын
Yeah I admit this video was a bit amateur hour for me. Oh well, I always leave my mistakes out there for people to see and learn from!
@bugzie706
8 жыл бұрын
you have a lot more skill than the majority of you tubers on here for sure and thank you for responding the only other tip is to when the belt is still on take pulley on the pump off the belt will hold it or if not you can buy a pulley strap to hold it and take it off, then maybe it will sneak out without taking the brackets off, good luck to you sir.
@hirmizzz
7 жыл бұрын
Excellent video God bless you
@dennisgillaspie4660
5 жыл бұрын
Any chance you remember the size of the bolts you removed? Just getting ready to do this job on my son's car, and am buying my first impact gun. I want to buy the smallest set of sockets possible, and still get the ones I'll need for this job.
@Sroor2023
3 жыл бұрын
Good video how to avoid mistakes but you look slimmer than before or it’s the camera 😅 did you lose weight ??
@edelmironadal2696
6 жыл бұрын
thanks for the help and honesty.
@evanbahadur7323
3 жыл бұрын
You shouldn't start the car when you first add the fluid, you should jack the front of the car then turn the wheels left and right a couple of times to get the air out then start or turn the power steering pulley to get the air out, rotating the steering a few times also does the trick, check the power steering oil reservoir for air bubbles, once air has been removed start the car.
@henrylopez9815
8 жыл бұрын
Hi 50's kid did you ever figure out what was tge source of the noise? I also have a 2001 altima making the same exact noise.
@edwardlopez8822
5 жыл бұрын
You should try lifting both front tires off the ground and turn the steering wheel till they lock in each direction, hold for moment to let the air bleed out. Then repeat the process a couple more times till p/s Reservoir is clear of air bubbles. You can drop the car and do the same process with car on and hear for noise.
@angellandaverde
3 жыл бұрын
Thank you is very good. Video. But. Yes you are very good
@LouieLasVegas69
5 жыл бұрын
Awesome video. Very detailed. Bravo for posting your mistakes. We all make them. However, after watching the video, I'd rather take a nap, so I dropped the car off at the mechanic and let them deal with the replacement. I'd rather pay.
@ruben85374
3 жыл бұрын
Did you have trouble getting the air out of the system. I got the air out seems like it but I have no power steering 🤷🏻♂️
@50sKid
3 жыл бұрын
I didn’t, but keep turning from lock to lock and eventually the air bubble will work it’s way out
@ruben85374
3 жыл бұрын
@@50sKid I seem [o have gotten the air out or so it seems. No bubbles fluid topped off, but just don't have power steering at all I'm stuck.
@50sKid
3 жыл бұрын
@@ruben85374 Nah I believe there is still an air bubble trapped in there. Try again, turn lock to lock over and over again. It should work its way out of there. If not, something else is wrong.
@ruben85374
3 жыл бұрын
@@50sKid I figured it out thank you though
@Dgoldsgaming
5 жыл бұрын
Is this the same on a sentra same year ?
@gibill16
5 жыл бұрын
I think you reversed the two hoses under the fuse box but shouldn’t matter it just goes up to a cooler and back
@malmangelucci
7 жыл бұрын
Where did you get the return hose (the one from the reservoir to the pump)? Mine's leaking, but I can't seem to find it anywhere. Also, the hoses under the fuse box and in front of the condenser are leaking too. I'm curious if I could just buy some bulk hose and cut it to the different lengths I need. Your thoughts would be appreciated. Thanks!
@50sKid
7 жыл бұрын
Yes I wasn't able to find it either so I used bulk hose.
@malmangelucci
7 жыл бұрын
Sweet, thanks for the response. What about the hose that runs from the reservoir back to the pump? That line looks thicker than the ones under the relays. You said you replaced that one in another repair. Did you just use regular 3/8 bulk? Thanks again.
@rickjam3sdj
8 жыл бұрын
job well done either way, because I have a PS pump to remove, and was wondering how in the land of oz to get it off
@tipstricks252
3 жыл бұрын
Awesome video
@ralphreyes2440
8 жыл бұрын
Mine is 1996 Nissan Altima i have noticed that there was a power steering leak as well. My suspect was just the power steering pressure hose but not the power steering pump. Because i couldnt hear any sound from the pump itself. And the power steering reservoir doesnt get empty that fast. Is this correct? please advice thanks!!
@50sKid
8 жыл бұрын
Yes, correct. Just do a visual inspection of all the lines and hoses and you should find the culprit.
@ralphreyes2440
8 жыл бұрын
Is it most likely the power pressure steering hose ?
@50sKid
8 жыл бұрын
I can't say what it most likely is. You have to get your eyes in/under there with a flashlight and see what is wet.
@TheBeardedShane13
7 жыл бұрын
what is the plug and he bolt next to the power steering pump that you see at 4:15? that's where my leak is coming from:/
@50sKid
7 жыл бұрын
That is the lower timing cover. If that's leaking, it's engine oil.
@ng6950
3 жыл бұрын
Same for Altima coupe ?
@Irff2023
8 жыл бұрын
Im currently changing out the Power Steering pump on my Altima SER and luckily found your video! I have a question on removing the pump though. any reason you decided to remove the bracket instead of the pulley to remove the pump? I figured removing the pulley would be easier but didnt want to do that yet just incase!
@50sKid
8 жыл бұрын
+Melissa Foss I dunno, I think the bracket is way easier to remove, but there are many ways to skin a cat.
@brickarms21
5 жыл бұрын
So we swapped the pump, and now our dash, some tail lights, heater/ ac doesnt work
@thebackyardjunkerscientist7732
4 жыл бұрын
Check you blinker fluid its most likely overfilled.
@mindiseverything5036
6 жыл бұрын
2:09 am i trippin balls or is that not fake lug nuts on a hubcap that u were impacting off ???
@50sKid
6 жыл бұрын
Free Spirit they are plastic nuts that actually screw onto threads on the end of the actual lug nuts. I had to unscrew them.
@t_money_third9654
6 жыл бұрын
Holly shit I forgot to retighten that middle pully nut.
@michaeljohncapistrano9691
7 жыл бұрын
very good video!!!
@alfredflores1278
4 жыл бұрын
Excellent
@biggdrew7764
5 жыл бұрын
Awsome vid!!!!!
@dougdrefus3554
9 жыл бұрын
Change the PS reservoir- the filter is clogged. Not enough fluid for PS pump
@tungym
8 жыл бұрын
Amusing. Thanks !
@darkmorbius20
8 жыл бұрын
thank you for leaving your trait and errors
@brickarms21
5 жыл бұрын
Nor the wipers or turn signals
@victorrivera3471
8 жыл бұрын
clean engine bay.
@cristianflores8788
8 жыл бұрын
27:30 At this point of so much trial and error, I would have put the for sale sign and tell the buyer it only needs new $30 pulleys. 😨😨😨
Пікірлер: 99