just got a cd001 cheap, saw synrcrotech is releasing a carbon set cheap, considered giving it a shot before it goes in the drift missile. im thankful foe you demystifying the black magic inaide these things.
@Garage23
6 ай бұрын
I just saw that too! Definitely want to check those out.
@JuanRubio99
3 жыл бұрын
This video is so informative! Way better then other videos on KZitem, so clear and concise. This channel needs a million subscribers already.
@Garage23
3 жыл бұрын
That's why you are our #1 Subscriber!! Thanks dude 🙏🏻
@saewoody6366
Жыл бұрын
Thanks for the explanations on how the synchros work and how to tell whether they are still good or have gone bad. Lots of videos explain how to do something but don’t take the time to show or explain how to tell when if a part is still good or bad.
@kopimart
3 жыл бұрын
I now know what part grinds when i miss shift, thank you lol
@Garage23
3 жыл бұрын
Yup its amazing how much a little piece of brass can take
@barryhall7
Жыл бұрын
There's a company in the UK that will fusion or laser weld 3rd gear. The synchros should have a shoulder of about 1mn, these are very prone to wear. They can be upgraded but still not perfect. Good video 👍🏻
@Garage23
Жыл бұрын
Right the general design just isn't very good. There's also plenty of laser welding companies in the US, probably wouldn't be hard to convince one to give it a shot.
@marlonoriley8821
9 ай бұрын
Dude you’re awesome! Gonna try this on mine. I blew my 3rd in my cd004 so screw it, why not
@Garage23
9 ай бұрын
That 3rd gear causing all the problems 😅 It's worth a shot
@marlonoriley8821
9 ай бұрын
@@Garage23 seriously 🤣 being in California, everyone wants close to new prices for these and the cheaper ones all have similar issues. I just miss have all my gears. But again, I appreciate you man!
@Garage23
9 ай бұрын
@@marlonoriley8821 thanks! I'm glad its helping you out ✊
@OM4Rx
2 жыл бұрын
Very great video!
@nobodyspecial5026
Жыл бұрын
while the price for a new CD009 has increased a bit over the last two years, does it really make any sense to rebuild rather than replace? Maybe if you count your labor as free. It doesn’t if a shop charging labor is involved. .
@Garage23
Жыл бұрын
It usually doesn't make sense to rebuild especially if you take into account the price of parts in the US. However if you source everything from Japan there is a small margin for profit. That being said this is mainly geared toward drivers who want to repair their existing gearbox.
@Flakez_86
Жыл бұрын
What was the part number on the 3rd gear? The one in the description says it's discontinued
@duttygs3003
2 жыл бұрын
Did it work?👀
@Garage23
2 жыл бұрын
Still waiting on parts 😅 but it looks promising.
@camver100
2 жыл бұрын
Can you link the rebuild manual man!
@Garage23
2 жыл бұрын
Good idea! Link added to all videos under Description.
@jackw6795
2 жыл бұрын
just had my third split in half aswel. but you didnt explain why it was stuck and so hard to press off?
@Garage23
2 жыл бұрын
Im guessing it was because the inner portion of the gear that was cracked was binding up against the bearing
@jackw6795
2 жыл бұрын
@@Garage23 so essentially locking it in 3rd? been learning to figure out if i can repair mine and if it would be safe to drive temporarily. if the cracked gear gets caught on the countershaft on mine, its game over?
@Garage23
2 жыл бұрын
@@jackw6795 Correct, that's why ours wouldn't spin in any other gear, it was essentially in 2 gears at once. I wouldn't recommend driving on it, if this happens while driving it will lock up the wheels and potentially put you in a ditch.
@jackw6795
2 жыл бұрын
@@Garage23 yea thats what I thought, wouldnt take the chance now i know. thanks for your help and the video. might have a crack at a repair myself but alot more little parts than i imagined :D
@Garage23
2 жыл бұрын
@@jackw6795 no problem! Glad to help! You can do it, just watch out for those little magnets, stay organized and you'll do fine. We plan on sharing the final part in a couple of weeks 👍🏻
@marinaportocaribe
2 жыл бұрын
Il like to upgrade my cd003.... do you know if the synchros or the whole 2nd gear fits like 3rd gear?
@marinaportocaribe
2 жыл бұрын
Thanks for all the info shared
@Garage23
2 жыл бұрын
3rd gear worked between the cd009 and jk40c because they both have triple cone synchros. If second gear on the cd003 has triple cones then it might work.
@marinaportocaribe
2 жыл бұрын
@@Garage23 I think they upgraded second gear on cd009 3 vs 2 on the early models if those gears are interchangeable I'll buy a 350z project car🤞
Пікірлер: 31