Things you'll need:
-Jack
-Jack stands
-19mm 1/2 inch drive socket (for the wheel lug nuts)
-1/2 inch drive ratchet
-21mm Socket AND wrench ( you WILL need two 21mm sized tools. An adjustable wrench is fine as a substitute for one of the tools. But you WILL need either at least one 21mm Socket or wrench)
-16mm Socket ( a wrench will not work here there is not enough space)
- 3/8 inch drive ratchet (for sockets)
- Socket extensions
- Pliers
- Copper hammer or copper punch
- Can use a properly sized piece of would and a hammer if you do not a have a copper hammer (refer to video for more input)
- Flat blade screwdriver
- Anti seize lubricant
- Pan to catch transmission fluid that comes out
-Cardboard to put on floor of work area to keep it clean (optional)
-Flat head and Phillips screwdrivers
-17mm socket and ratchet, or a 17mm wrench
- Transmission fluid (from dealership only) in case too much fluid comes out of the transmission when the axle is removed
SUBCRIBE and hit the LIKE button!
www.youtube.co....
SUPPORT CHANNEL:
www.paypal.me/...
This video is made for entertainment and reference.
All automotive services should be done by professionals.
SUBSCRIBE and hit the LIKE button!
www.youtube.co....
SUPPORT CHANNEL:
www.paypal.me/...
This video is made for entertainment and reference.
Негізгі бет Nissan Juke Front CV Axle Replacement Passenger Side 2011 2012 2013 2014 2015 2016 2017 How to Guide
Пікірлер: 117