Thank you for making this video. This is by far *THE* clearest reference of specifically where the alignment marks are, and the chain link marks.
@ziggassedup
8 ай бұрын
You're welcome...Cheers mate,
@hypemoto
8 ай бұрын
I would agree!
@phishin81
Жыл бұрын
thanks for making this video! I had seen it before but I looked it up again as I was setting my chains up yesterday just to make sure I was doing it right. Got er all together and she's back up and running pretty again today! Thanks again!
@ziggassedup
Жыл бұрын
Glad it helped...Cheers mate.
@joelgonzalez7713
2 күн бұрын
The chain dark links make it easy thanks now I have to do one allot of stuff to removed
@ziggassedup
Күн бұрын
Good luck mate.
@MalcOfLincoln
6 жыл бұрын
Easy when you know how. Nice job. Just a point of interest, I never knew chains had timing links until I checked my Nuffield last year. (Did a video of that). I've fitted dozens while reconing engines in the 70s. Mainly Mk1 Cortina etc and Minis A and B series. Also Vauxhalls of the same era. Yet my Nuffield engine is 1953. Never too old to learn, and you only learn the first time you do it.
@ziggassedup
6 жыл бұрын
Bright or dark links make it much easier Malc...Yep I've learnt enough about these and hope I don't ever have the pleasure again.
@masterpplumbersprojects9620
2 жыл бұрын
Thanks Zig have a managed to do my v6 motor from scratch now it's back on track.l am not a mechanic but l fixed my motor through your instructions, you a the boss
@ziggassedup
2 жыл бұрын
That's great to hear my friend...Congratulations and you're welcome..Cheers.
@fernandobriseno8164
Жыл бұрын
Was your engine off time?
@larryz24
6 жыл бұрын
Zig, you are an artist for sure....can't wait to see it in and running. CYL Pal.
@ziggassedup
6 жыл бұрын
Thanks Larry...Should be a runner soon.
@WallysPlace66
6 жыл бұрын
Always a cliffhanger. I'll be looking for the next video mate. Have a good week Ziggy
@ziggassedup
6 жыл бұрын
Thanks Ronnie...Fingers crossed it will be running tomorrow or real close to it.
@user-vs2no9dk3k
6 ай бұрын
I really like your explanation, thanks.
@ziggassedup
6 ай бұрын
You are welcome!
@geocode2790
5 жыл бұрын
At 4:57 i'm sure that was supposed to be referencing cylinder 4 not 6. It's a decent video, keep it up here thanks :)
@ziggassedup
4 жыл бұрын
yes
@Badgertronix
6 жыл бұрын
It's quality work like this that proves you are the master. Good job 👍
@ziggassedup
6 жыл бұрын
Aw shucks Badger...Cheers mate.
@anthonynwanyanwu4329
2 жыл бұрын
I like your explanation, it's very clear. Keep it up
@ziggassedup
2 жыл бұрын
Thank you Anthony....Cheers mate.
@closertothetruth9209
6 жыл бұрын
Love your videos no one explains things like this or atleast no one I've found. Now that ive learnt almost everything I find your channel, wish I'd found channels like yours years ago. I bet many will learn a thing or two from you. Now one of my favourite channels.
@ziggassedup
6 жыл бұрын
Than you sir.
@TheOpenAirGarage
6 жыл бұрын
This motor is like a jigsaw puzzle. LOL, a lot of areas where you can go wrong. Getting closer.
@ziggassedup
6 жыл бұрын
Sure is a challenge...Gotta pay real good attention to this one..
@Dancing_Alone_wRentals
2 жыл бұрын
tHanks....This video is clear and easy to follow. Merci Buckets!
@ziggassedup
2 жыл бұрын
You're welcome!
@SteveRobReviews
6 жыл бұрын
Chuck it in the hole eh :) They did a nice job of all them locating points for the chain.
@ziggassedup
6 жыл бұрын
Thankfully..Lining up all the stuff is a tricky enough thing but with no ID markings it would be real tough...BTW It's in the hole...No action shots sorry Steve.
@h63kl10
4 жыл бұрын
Al idioma no le entendi nada , pero estubo muy bien señalado , todas las marcas , excelente , gracias por el video.
@ziggassedup
4 жыл бұрын
Thank you.
@reyandy4851
4 жыл бұрын
When number 1 cylinder is up mirroring each other, indicating TDC, the mark on the crankshaft or keyway does not align. How would I get those to align?
@RustyGlovebox
6 жыл бұрын
A lot different setup from the older Holdens Mate. Nice job !
@ziggassedup
6 жыл бұрын
Gimme an old Holden any day Lloyd...Cheers mate.
@cutworm59
6 жыл бұрын
You must be famous for fixing the most complicated jobs in all of OZ!
@ziggassedup
6 жыл бұрын
Not the kind of famous I was looking for...Thanks Steve.
@atx-cvpi_99
3 жыл бұрын
The GM HFV6 is more complex than this.
@homotorsports
6 жыл бұрын
NICE!!!! On Toyotas we have to unlock the VVTI gear before it`s installed or the pin will bind and kick a VVTI code
@ziggassedup
6 жыл бұрын
Cheers Ant..What engine is that for mate.?..Hopefully I won't need to remember that..lol
@exploreoutdoors3978
5 жыл бұрын
Thank you loads for your clear and thorough explanation
@ziggassedup
5 жыл бұрын
All good mate.
@simonjevan
6 жыл бұрын
👍 thanks Zig I don’t think I’ll ever buy a V6 again, farrrk, nightmarish inside 😬
@ziggassedup
6 жыл бұрын
You sure don't want to buy one of these...Cheers Simon.
@MotoRod1
6 жыл бұрын
Nice work Zig, nearly there!
@ziggassedup
6 жыл бұрын
Thank you.
@ronishchand8828
2 жыл бұрын
Great one point video. Good work
@ziggassedup
2 жыл бұрын
Thank you! 😊
@catfishsnagger3284
3 ай бұрын
Why didn't you actually show how you put the chain and gears on. I need to know how to get the chain past the tensioner without taking the cam covers off and listening the tensioner bolts up. That's the only way I can see being able to get the chain past the tensioner even with it fully compressed mine has no room to pass over the lip on the tensioner foot.
@ziggassedup
3 ай бұрын
That is not possible.
@TRUTHRISING1717
7 ай бұрын
I’m doing this job right now. But on the 3.5L
@ziggassedup
7 ай бұрын
It's a bunch of fun..
@TRUTHRISING1717
7 ай бұрын
@@ziggassedup😂 oh I know I can’t think of anything else I’d rather be doing… lol. at least you had the option of taking the motor out and getting to it, hell I have the entire left side of the Motor apart just to get the timing cover off.
@txsviking
6 жыл бұрын
Nice work. I got to see ya "Chuck it in the hole" lol
@ziggassedup
6 жыл бұрын
I chucked it in today Terry but no action shots...Sorry.
@stuzman52
6 жыл бұрын
Great work Zig and I can only assume that the complicated jobs always goes to you in the shop. 😀👍
@ziggassedup
6 жыл бұрын
Unfortunately yes as I'm the only mechanic in the place...Cheers mate.
@manishanandanand3311
3 жыл бұрын
@@ziggassedup} p
@abbasyusuf6868
3 жыл бұрын
I like that
@ziggassedup
3 жыл бұрын
Cheers mate.
@afterhoursauto1
3 жыл бұрын
Good info but one correction, your pointing at cylinder 4 and saying cylinder 6.
@ziggassedup
3 жыл бұрын
Cheers mate ...Yeah I know but a one take shot and not much I can do now...I'd just finished caming a 350...You know 1&6 are a TDC at the same time...My bad.
@paulsaucier8514
3 жыл бұрын
Thank you sir! I I'm doing one right now and my manual is a little old.
@rosspittsrp684
3 жыл бұрын
Came here looking for this comment
@ELEVOPR
3 жыл бұрын
How much should a job like this cost with engine inside of the car, the more or less Average price not Exact. Changing Everything you should be changing when doing the timing chain of course.
@ziggassedup
3 жыл бұрын
The best part of $1500.
@rockerpat1085
6 жыл бұрын
Can you guys get service manuals? Been trying to get a manual for a Nissan Pathfinder. No luck at Nissan. Seems Alldata has it locked up. Keep Rocking it out Down Under!!!
@chefmen101
6 жыл бұрын
try www.allcarmanuals.com
@rockerpat1085
6 жыл бұрын
+chefmen101 Sorry dude but thats a nothing burger. No such thing as a free lunch. We have tried those kind of free manuals. No diagnostic information, no wiring diagrams, no check engine trouble charts. If it's free you get NO useful information. But thanks for your help. Keep Rocking!!!
@ziggassedup
6 жыл бұрын
I used an online Nissan manual to find out torque settings...I looked through the whole thing and it's very detailed. boredmder.com/FSMs/Nissan/Pathfinder/2008/EM.pdf Try this..Cheers Pat.
@arunayuven2102
5 күн бұрын
Thanks ❤
@ziggassedup
4 күн бұрын
No problem
@Timetotinker
6 жыл бұрын
rockin along, good job.................tony
@ziggassedup
6 жыл бұрын
We're getting there..Cheers Tony.
@PMAC-dx2ts
2 жыл бұрын
Nice explanation, thanks.
@ziggassedup
2 жыл бұрын
You are welcome!
@GhettoWagon
6 жыл бұрын
Got dan its timing chain time !
@ziggassedup
6 жыл бұрын
Yay.
@leonardolares9314
7 ай бұрын
excelent
@ziggassedup
7 ай бұрын
Cheers.
@djdenn60609
2 жыл бұрын
Roger That.
@hassanyehia5742
3 жыл бұрын
شكرا جزيلا على المعلومات
@ziggassedup
3 жыл бұрын
You're welcome.
@luayrafaa6240
7 ай бұрын
بلا زحمة تعرف شكد الوقت او المسافة المقطوعة للسيارة لتبديل قايش التايم كيس مال محرك ؟
@felgarcia898
6 жыл бұрын
I took the main crankshaft sprocket off because I wanted to replace the oil pump. I had already tdc removed the chain and when I was trying to take the sproket out, the crankshaft rod moved just a little bit clockwise, does it matter anny in relation to the tdc? Any input will really help. Thanks.
@ziggassedup
6 жыл бұрын
Can't you turn the crank back to TDC.?...The cams are set using the marks and dots on the chain and gears so make sure they all line up.
@homeboywelles9736
Жыл бұрын
Why do these chains wear out at 100k? Is there an oil issue not lubricating the chain?
@ziggassedup
Жыл бұрын
Not sure mate...Bad design maybe.?
@cheftush
6 жыл бұрын
Good job Zig!
@ziggassedup
6 жыл бұрын
Thanks Tush.
@truckcarguru2284
5 жыл бұрын
Educational 💯 made since to me
@ziggassedup
4 жыл бұрын
Good.
@luayrafaa6240
7 ай бұрын
Hi there so I have a question ple So how long time or miles should be change it ple .thanks
@ziggassedup
7 ай бұрын
There is no set tine or miles period for chain replacement.
@larryhurst8958
6 жыл бұрын
Typically what does the job run out of your shop parts and labor? Be interesting to compare the USA vs European costs. Thanks
@ziggassedup
6 жыл бұрын
In this job we had the heads serviced as well as a new set of piston rings and main and big end bearings and the timing chains and guides...I think it came to $5500.
@larryhurst8958
3 жыл бұрын
@@ziggassedup Thanks, I will see what I can come up with
@tendongzisylvester9016
2 жыл бұрын
So great man
@ziggassedup
2 жыл бұрын
Cheers.
@slackjawedyorkle
4 жыл бұрын
What's the part number to the black disc seals in the timing cover above the cam tensioners?
@ziggassedup
4 жыл бұрын
Sorry I can't help you there...the seals came in the engine gasket set.
@jasonrodriguez6721
4 жыл бұрын
Great video! May you be able to help me out I removed cams off of my 4.0 and they got mixed I want to be sure I place them back properly in the correct order
@ziggassedup
4 жыл бұрын
Not exactly sure about that sorry.
@christophershimosaka2346
Жыл бұрын
Hey man I’m trying to do my timing chain but I was wondering do I have to drop the motor? Ik this video is old hoping you could help thanks
@ziggassedup
Жыл бұрын
No but it's a bit of a struggle...Cheers Christopher.
@JohnDoan-iu7sm
3 ай бұрын
So much easier with the engine out but I shall keep working in my hole
@ziggassedup
3 ай бұрын
Good luck!
@fusiontlw7606
Ай бұрын
do you know where i can get a lockout for the cams?
@ziggassedup
Ай бұрын
Sorry no.
@shawnmrfixitlee6478
6 жыл бұрын
good job zig ..
@ziggassedup
6 жыл бұрын
Cheers Shawn.
@JaimeLopez-lg2cm
Жыл бұрын
Hey man do you take the pins of the top tensioners as you go or take all of them at the same time
@ziggassedup
Жыл бұрын
It doesn't matter what order...Cheers mate.
@bktarch
6 жыл бұрын
at 0.50, you have your 2 blue links aligned with the 2 round dots for the passenger side camshaft. at 1.33, you have your 2 blue links aligned with the 2 oval marks for the driver side. how can your camshafts be aligned if you put the chains onto different marks?
@ziggassedup
6 жыл бұрын
Because that's the way the Nissan manual says to set it up.
@bktarch
6 жыл бұрын
I see. thanks
@mrbiohazards
5 жыл бұрын
Thank you realy useful comment ! I did not see this ! good observation .
@wesleybrunson2445
5 жыл бұрын
Thats good to see the two oval links lined up bc online it just says to line up the punched dots but they wouldnt lol
@ndspeedster
2 жыл бұрын
YOU DONT SHOW HOW TO LINE UP THE LEFT SIDE CAM SPROCKETS
@ziggassedup
2 жыл бұрын
Both sides line up the same. Line up the marks just the same.
@promero9292
Жыл бұрын
Hello from Sunny California! I need your input. I’m ready to install new Timing Chains, Tensioners, Guide and Gears. I put the engine at TDC. Only problem is Right Cam Gears are off by 2-3 teeth. Is it okay when I install all the new components to adjust everything to align with cam sprocket markings to the timing cover markings? Or just leave it alone and use the exact same current position?
@ziggassedup
Жыл бұрын
G'day from downunder....Line up the markings like I showed...Cheers mate..
@promero9292
Жыл бұрын
@@ziggassedup thanks Brother! Will do. Greatly appreciate your speedy response.👍
@steveburbage1230
5 жыл бұрын
Hello and good afternoon, I am just about to do the timing chains on my 350z after the front pulley fractured and threw out the woodruff key into space, got a new crankshaft sprocket and woodruff key, but when I push the crankshaft sprocket home over the keyway there's not much woodruff key to drive the sprocket, and I am thinking all that pressure on that very short length of the key to drive everything, is this correct, if so it's a bad design, I would appreciate your help and advice, cheers, by the way keep up the good work with the videos 👍
@ziggassedup
5 жыл бұрын
Is it a genuine Nissan key.?..I'd have to see what you have to advise you any further.
@steveburbage1230
5 жыл бұрын
@@ziggassedup Hi, thank you for your reply,yes a genuine key part number 0092651600, confirmed the correct one by nissan dealership, I appreciate your help, 👍
@pascratcherjoe
6 жыл бұрын
What happens if you take the 4 bolts off the intake cam sprocket? They say not to touch those bolts and i took them out?
@ziggassedup
6 жыл бұрын
You'll most likely bugger up the VCT stuff.
@kamalakannansubramaniam3727
6 жыл бұрын
Fantastic explanations.
@ziggassedup
6 жыл бұрын
Thank you.
@user-kt4de2gt2o
7 ай бұрын
Where can I buy the distribution kit?
@ziggassedup
7 ай бұрын
Sorry I can't help you there.
@felgarcia898
6 жыл бұрын
Can you tell me, do I have to take the timing chain cover off to replace the oil pump. Thanks.
@ziggassedup
6 жыл бұрын
Yes...The oil pump is attached to the timing cover.
@djdenn60609
2 жыл бұрын
Can you do this on my 2005 Nissan Pathfinder? It has the same engine...
@ziggassedup
2 жыл бұрын
Yes I could but it's very time consuming and I have many other vehicles to work on at the moment..Sorry.
@benjaminfrost2003
Жыл бұрын
Hey where'd you get that cam gear locker? The ones I find go in between the sprockets and would have no hope getting it out post assembly.
@ziggassedup
Жыл бұрын
I didn't use cam locks.
@benjaminfrost2003
Жыл бұрын
How did you stop the left side bank from rolling off alignment, is the chain tensioner and cam caps enough to hold it in place? I'm in the process of doing this after 3 other people pulled it apart, mine are like mentioned before 3 tooth off both intake and exh and I figured I'd put the pulleys and chains on and then turn it back to alignment those 3 teeth but assumed it'd roll back off TDC moment I let go of it
@ziggassedup
Жыл бұрын
@@benjaminfrost2003 To memory I think I just turned the cam to line up with the link when I was up to that part.
@Discoworx
4 жыл бұрын
Is this a free running motor? I have a mate who says that the mechanic reckons the timing chain has come off and may have twisted the camshaft. Thanks
@ziggassedup
4 жыл бұрын
No it's not a free spinner...I doubt the chain has come off and twisted a camshaft but it is possible the chains have stretched and the guides and tensioner pads have worn out resulting in a slipped chain.
@Discoworx
4 жыл бұрын
@@ziggassedup cheers. So possibly bent valves?
@ziggassedup
4 жыл бұрын
@@Discoworx Yes sir.
@Yazmany01
Жыл бұрын
Hi im working on this style of engine. I'm replacing the timing chain and tensioner but I made the mistake of loosening the left vvt sprocket and now when I put it back, it is sitting a little crooked. I can't figure out what I did wrong
@ziggassedup
Жыл бұрын
Sorry mate I've not had that problem.
@bobgwinn5091
6 жыл бұрын
cool. no cam bearings? i've never seen the double over head valves but assume there is bearings there too. and worn like the mains. those rubber gaskets coming from china?
@ziggassedup
6 жыл бұрын
No alloy OHC's run cam bearings..No oil pressure and the whole thing is toast...Could be Chinese.
@bobgwinn5091
6 жыл бұрын
ahh ok. ty
@slavikonufriychuk3485
5 жыл бұрын
@@ziggassedup hi.r u using OEM parts or aftermarket. If aftermarket which brand. any information will b appreciated.
@ziggassedup
5 жыл бұрын
@@slavikonufriychuk3485 Aftermarket...Sorry I don't recall the brand.
@wtbm123
6 жыл бұрын
Cool
@ziggassedup
6 жыл бұрын
Cheers Terry.
@fs0c1ety_bs92
5 жыл бұрын
that's vq35 I don't use the default timing marks I use my own
@ziggassedup
5 жыл бұрын
No it's a VQ40 not a 3.5.
@fs0c1ety_bs92
5 жыл бұрын
@@ziggassedup ok but timing is same I guess
@eminiscalperpro9729
3 жыл бұрын
On the cam caps, did you put rtv in both the small channels, one has a funnel shape near the end. Or did u only put rtv in the outter one? Thank u!
@ziggassedup
3 жыл бұрын
Just a touch in the corners is always good.
@eminiscalperpro9729
3 жыл бұрын
Sounds good.. Do u see many issues with the vq40 oil galley gaskets?
@huck01955
6 жыл бұрын
Nice work sir :)
@ziggassedup
6 жыл бұрын
Thank you..I try.
@randy1ization
5 жыл бұрын
surely u replaced the water pump?
@ziggassedup
5 жыл бұрын
Pretty sure we did...Cheers.
@spanermantim
6 жыл бұрын
Coming together mate, soon be out of your hair.
@ziggassedup
6 жыл бұрын
Thankfully...Cheers Tim.
@jamiemattis1929
3 жыл бұрын
4:54 are you sure that's cylinder 6? Looks like cylinder 4 to me
@ziggassedup
3 жыл бұрын
Yes it is #4...
@miguelresto3297
6 жыл бұрын
hello, I want to know what size are the lubrication ring or the head?
@ziggassedup
6 жыл бұрын
Sorry I don't have that information...All seals came in a gasket/seal kit...I'm sure Nissan would be able to tell you...I can say that they are square shoulder rings no round "O" rings
@miguelresto3297
6 жыл бұрын
O rings
@hotdogsoltero571
3 жыл бұрын
Hello, what was the reason/ symptoms and mileage for the work done?... mine has a rattling on cold starts only 144k
@ziggassedup
3 жыл бұрын
This blew excessive smoke...It had 160k and everything was warn out.
@nickturner4728
Жыл бұрын
Mine rattles on cold starts too at 120k. Did you end up replacing yours hotdogsoltero571?
@fuckucatchme1000rr
3 жыл бұрын
Crikey!
@ziggassedup
3 жыл бұрын
Indeed.
@abbasiiqbal7239
4 жыл бұрын
Thanks bro 👍
@ziggassedup
4 жыл бұрын
No problem 👍
@miguelresto3297
6 жыл бұрын
O rings
@jeovaunneritchie9513
2 жыл бұрын
Do you have to cycle engine after chains are on??
@ziggassedup
2 жыл бұрын
No...
@efanclublolsmaforlife2501
2 жыл бұрын
Nice camera fling all over an can't seen anything
@ziggassedup
2 жыл бұрын
Cheers mate. You seem to be the only person with that problem.
@Youdontneedtoknowboy
4 жыл бұрын
What was the torque specs for the camshaft sprocket bolts?
@ziggassedup
4 жыл бұрын
Sorry I don't recall...I found the specs by google....I think I looked up VQ40DE engine specifications and found a Nissan manual.
@Youdontneedtoknowboy
4 жыл бұрын
Thanks for the reply!! Been looking and I can’t seem to find it. Thanks again, good video.
@user-wb2yb1eq5g
2 жыл бұрын
نبو الشرح باللغة العربية من فضلك
@ziggassedup
2 жыл бұрын
Sorry.
@lilapeituifotu5374
Жыл бұрын
How to Remove Water pump
@ziggassedup
Жыл бұрын
Strip it down to this point and remove the pump...Not easy by any means.
@fernandobriseno8164
Жыл бұрын
Seen a video where they remove access panels on the timing cover over tensioner and water pump. Once the chain is loose they use 2 long bolts to get the water pump out.
@judeamakiri-ng7ln
Жыл бұрын
I need your assistance
@ziggassedup
Жыл бұрын
What can I do for you.?
@CountrySideClub
6 жыл бұрын
😎😎😎😎
@ziggassedup
6 жыл бұрын
Cheers CJ.
@ksmart10
9 ай бұрын
you in qld at all
@ziggassedup
9 ай бұрын
Nah mate...NSW
@eminiscalperpro9729
4 жыл бұрын
hi mate, do you recommend changing the two secondary chain tensioners?
@ziggassedup
4 жыл бұрын
Absolutely a must.
@eminiscalperpro9729
4 жыл бұрын
@@ziggassedup Thank You!
@MissouriOldTimer
6 жыл бұрын
compared to that, doing a Subaru engine is easy.
@ziggassedup
6 жыл бұрын
It is pretty involved...Cheers mate.
@AbCd-187
4 ай бұрын
Fuck it im selling it.
@ziggassedup
4 ай бұрын
Not a bad idea.
@AbCd-187
4 ай бұрын
@@ziggassedup and shes at 280k miles I think its time to let her go
Пікірлер: 212