For headlights. How do you determine the wire left turn signal and right turn signal.
@NextLevelNeo
Жыл бұрын
Looking at the controller with our logo up, the top 2 connectors are controlled by the short turn signal wire. The bottom 2 are controlled by the long turn signal wire.
@MrCameljockey1
Жыл бұрын
I put my drl and start up together. But I don't have drl function on my 2003 s2000. I wired them both to my parking light red wire. There are 3 wires for that parking light 1 red and I think 2 black. They don't animate when I turn the key.
@NextLevelNeo
Жыл бұрын
@Shawn Saleem you can test the controller drl wires by going direct to 12v. If you get the animation doing that but not on your red wire on the car then it's probably not the right wire. Colors don't always mean the norm. One of the black wires may be your drl.
@ricvansinc
11 ай бұрын
How heavy is the Halo front lights?
@NextLevelNeo
11 ай бұрын
Halos are generally very light. It depends on which halo but usually around 1oz
@ricvansinc
11 ай бұрын
@@NextLevelNeo Thank you. I wanted to order now, but I need to inform the shipping company of its weight
@boostedsamuari7436
Ай бұрын
so once drl is on I can’t controller my controller to change any color?
@NextLevelNeo
Ай бұрын
@@boostedsamuari7436 that is correct
@ktkiller5610
Жыл бұрын
What is the app called?
@TripleTapHK
Жыл бұрын
At 5:08 you switch on the turn signals and it seems to be out of sync with the flasher. Is that normal? The brake one seemed to sync with the flasher correctly.
@NextLevelNeo
Жыл бұрын
I haven't noticed any issues with timing but in general, if you are using multiple turn signal devices with multiple controllers chances are that they will not sync up perfectly.
@51245000
Жыл бұрын
Hi could you tell me are these halos compatible with xk glow i realise there will be no animation im just trying to run every thing on one app and you have some halo shapes that i like
@NextLevelNeo
Жыл бұрын
Unfortunately our halos are not compatible with the xk glow controller
@mahmud5832
Жыл бұрын
Hello, for tail lights like the tesla, that has split up tail lights, how many splitters would you need?
@NextLevelNeo
Жыл бұрын
Our controllers have 4 outputs built in, but you would want extensions to run the wires. In general, this controller is ideal for halos or strips in a set of lights, but something more complicated will benefit from a blueghozt controller.
@FantasyGhost
Жыл бұрын
I noticed the DRL turns off when you’re using your turn signal around 10:15. It turned off both DRL sides? What happens when you brake and use the turn signal simultaneously? Can you tell the controller, like the ghost, how many LEDs you want to use for the turn signal separately to the DRL/brake LEDs?
@NextLevelNeo
Жыл бұрын
Yes, unfortunately it does turn off the brakes. This is not ideal for a full tail light build, it's more meant for adding a set of halos to your tail lights. I would go with BlueGhozt for a more indepth build. And unfortunately there is no adjustment for the signals and led counts.
@Jarednation63
Жыл бұрын
With this controller is it possible to drive around with the DRL in a different color or does have to be white all the time? for head lights
@NextLevelNeo
Жыл бұрын
The colors for drl and turn signals are set. These settings are preprogrammed on chips so there is little control over those functions.
@Jarednation63
Жыл бұрын
@@NextLevelNeo ok and does the app allow for solid colors or is it just animations
@NextLevelNeo
Жыл бұрын
@@Jarednation63 the app can do any solid color or any of several hundred animations
Пікірлер: 22