So sorry dear, I for got to hit the like button. Have a bless one🙏🏽❤
@bigsteppakayna157
5 ай бұрын
May you share the material and supplies you are using please.
@bigsteppakayna157
5 ай бұрын
I love this idea resin takes up to much time for me
@aneane2803
2 жыл бұрын
Thank you for posting love. You do yours different from most & I like that!
@TheBestUni
2 жыл бұрын
Thank you
@victoriagallegos4343
3 жыл бұрын
I actually love it I must give it a try Thank you ☺️
@kidablue
3 жыл бұрын
I can't wait to do this craft..GREAT JOB SIS!!!💯💥❤️
@TheBestUni
3 жыл бұрын
Thank you
@craftinsanity
3 жыл бұрын
That look good. You are on to something there. Keep up the good work 😊
@phatswagwhocare6187
3 жыл бұрын
Omg thank u so much this is a excellent alternative from epoxy especially for people who have breathing problems once again thank u stay blessed💕💕💕💕❤❤❤😍😍😍
@TheBestUni
3 жыл бұрын
U so welcome
@lisaeaster5364
3 жыл бұрын
Wow .... Nice work you got it going on . You expires me to push forward .
@lindabennettdesboine6186
3 жыл бұрын
Inspire
@MsDeLo60
3 жыл бұрын
Thank You!!!! I appreciate your video it helped me in a few ways.
@TheBestUni
3 жыл бұрын
You are so welcome
@jameniascustoms
3 жыл бұрын
Been looking for a way with no epoxy thanks 😊
@TheBestUni
3 жыл бұрын
You so welcome
@gailygail8469
2 жыл бұрын
Thanks for sharing, All your work is amazing.
@TheBestUni
2 жыл бұрын
Thank you for your support
@blessedbythebest35
3 жыл бұрын
Keep up the good work. Love it
@Mrs81BigMouth
3 жыл бұрын
I like that because it is without epoxy. Another great video
@TheBestUni
3 жыл бұрын
Thank you
@euniceallen904
3 жыл бұрын
Ok nice I may be able to do that, looks good so far
@mildredlanier5833
2 жыл бұрын
Beautiful!!!
@TheBestUni
2 жыл бұрын
Thank you
@staceymoten3202
3 жыл бұрын
Sister that's pretty cool. My printer came yesterday FINALLY and it's all converted over. I tested it with copy paper just to see if it would work and IT DID!!! Now I'm just waiting for that A-sub paper to come in and girl it's gone be on and crack'n.
@TheBestUni
3 жыл бұрын
Can’t wait to see your amazing work
@chandraanjelica5608
3 жыл бұрын
Where did u purchase your printer? Theyre literally sold out everywhere
@TheBestUni
3 жыл бұрын
I got mine from Walmart
@chandraanjelica5608
3 жыл бұрын
@@TheBestUni sold out as well. Guess i will have to wait but i really want to try this method
@staceymoten3202
3 жыл бұрын
@@chandraanjelica5608 I got it from amazon
@sonyascrafts4527
3 жыл бұрын
Great Alternative! TFS❤
@staynreal4u
3 жыл бұрын
Luv this idea, thanks
@preciouspeaces
3 жыл бұрын
TFS...U da best!!! U did that🙌🏽🙌🏽
@TheBestUni
3 жыл бұрын
Thank you sis
@peachezhigh7726
3 жыл бұрын
That came out very nice
@TheBestUni
3 жыл бұрын
Thank you
@janal4352
3 жыл бұрын
It might work easier if you would try to tape your design together and put the clear liner on top of design then press all of it to the tray. Just a suggestion, who you know!!👏👏🤩
@TheBestUni
3 жыл бұрын
Yes great idea
@joiedwards6285
3 жыл бұрын
I actually got the idea from you Best Uni! I lay the contact paper on the image before I cut it out on the Cricut. I let the Cricut cut the contact paper and image at the same time. That eliminates bubbles. I guess in this case I’d prolly connect the two pieces together cover the two with the the contact paper and then let the Cricut cut it out together the size of the full sheet. I’m gonna have to try this tomorrow.
@janal4352
3 жыл бұрын
Yes, Joi that would be the best way! I am going to try it too!
@audreymack8801
3 жыл бұрын
I like that good idea thank you for that idea.
@euniceallen904
3 жыл бұрын
Ok I may be able to do that, nice so far!
@lynettawood5232
3 жыл бұрын
Queen another great video cute image i would seal egdes with modge pog or quick resin stay safe and blessed up
@TheBestUni
3 жыл бұрын
❤️❤️❤️you to love
@Jamson772
2 жыл бұрын
Would cutting the edge off before the liner make it little easier to apply
@joymcclendon806
3 жыл бұрын
Great job
@loletaharlan9550
3 жыл бұрын
What brand of paper is that, it looks good
@VAMUKBANGQUEENS
3 жыл бұрын
Hey hun...love the tray 😘😘
@TheBestUni
3 жыл бұрын
Hi love thank you
@MsTes777
3 жыл бұрын
Ok u lost me at “slice”! 🤔😬🤣 Ok watched it all and I’m and impressed! I wondered what U would do with the extra paper I edge👍🏽. I tried it and had to peel the top layer off later as it started to come up. Very neat end result on urs!! Ok 🥳.
@TheBestUni
3 жыл бұрын
Just get a square and cover half of the picture and highlight all and the push slice
@glchild251
3 жыл бұрын
Great job, is that shelf lining paper easy to reposition?
@TheBestUni
3 жыл бұрын
Yes
@laflame3695
2 жыл бұрын
Thank You 😊
@TheBestUni
2 жыл бұрын
Thank you
@glammapepsi
3 жыл бұрын
This I can do because I fail at epoxy lol Thank you for the video
@paulettehunter1350
3 жыл бұрын
Love it.💕 where do you get those images
@TheBestUni
3 жыл бұрын
Off google
@jessiegibson9023
3 жыл бұрын
Good video thanks
@beverly7083
3 жыл бұрын
Love it!
@TheBestUni
3 жыл бұрын
Hi love how you been and thank you
@samday4424
3 жыл бұрын
You did that👍🏽👍🏽👍🏽👸🏾
@TheBestUni
3 жыл бұрын
Thank you king 🤴🏾
@leahronise9983
3 жыл бұрын
You did a really 👍🏾
@TheBestUni
3 жыл бұрын
Thank you
@chinitascraftylife6265
3 жыл бұрын
That's a great alternative to epoxy and a lot cheaper.
@latricewatson2131
3 ай бұрын
I'm going to do this as well
@chandraanjelica5608
3 жыл бұрын
Im wondering if using a small roller could help lay the transfer paper flat.
@TheBestUni
3 жыл бұрын
Yes
@tanishahorne6490
Жыл бұрын
What type of paper are you using for the image ? An are you using a regular printer ?
@TheBestUni
Жыл бұрын
Avery shipping labels and yes a regular printer
@mz.johnson4934
3 жыл бұрын
You do good work gurl....I do have a question what ink are you using.... sublimation ink or ink jet?
@TheBestUni
3 жыл бұрын
Ink jet
@mz.johnson4934
3 жыл бұрын
@@TheBestUni you used your hp printer 🖨
@TheBestUni
3 жыл бұрын
@@mz.johnson4934 yes
@specialk8927
Жыл бұрын
Will it lift up from the gray edge since you cut it and the adhesive is not holding it over the edge
@TheBestUni
Жыл бұрын
Eventually
@euniceallen904
3 жыл бұрын
You do not have to seal it?
@CreationsbyKAyishaLLC
3 жыл бұрын
Work it Sissy "WHO YOU KNOW"
@TheBestUni
3 жыл бұрын
❤️
@tamikka09
3 жыл бұрын
😍😍😍
@uniquecreations1586
3 жыл бұрын
I like this craft, but if you use the laminated pouches I think it would be easier and smoother. Love your ideas keep up the good work.
@glchild251
3 жыл бұрын
Are you talking about the self lamenting paper?
@choclitsuga
2 жыл бұрын
Are you using sublimation ink or regular ink?
@TheBestUni
2 жыл бұрын
Regular printer
@christinamurphy853
2 жыл бұрын
Hi uni! I know you posted this video almost a year ago LOL. But I was wondering have you ever used the plastic trays instead of the metal?
@TheBestUni
2 жыл бұрын
Yes but some time resin don’t do good on plastic
@christinamurphy853
2 жыл бұрын
@@TheBestUni right... but if I use sticker vinyl I don't have to use the Mod Podge
@christinamurphy853
2 жыл бұрын
@@TheBestUni or do your method LOL and just leave the contact paper on top of it and then epoxy. I'm going to try I'll let you know what it do LOL
@christinamurphy853
2 жыл бұрын
@@TheBestUni I have owned my own custom apparel & accessory business for over three years now but this is the first time I'm stepping into these trays.I'm experience with the mod podge and epoxy. But I'm like you work smart not hard LOL I have some green plastic trays left over from some things I did for Christmas I guess if it don't work Dollar Tree here I come LOL
@jvjv7085
3 жыл бұрын
Hey Unicrew.... hit that like!
@TheBestUni
3 жыл бұрын
Hi love Thank you 😊
@whitneymathenia5458
2 жыл бұрын
Could I do this with a glitter tray?
@TheBestUni
2 жыл бұрын
I don’t think so but try you never know I will try a stick of paper
@katinabailey2770
2 жыл бұрын
Did u use a printer and if so what kind of paper pls tell
@TheBestUni
2 жыл бұрын
Yes a regular printer and Avery shipping labels
@90CherryB90
2 жыл бұрын
If you epoxy it will you still see the lines?
@TheBestUni
2 жыл бұрын
No
@latricewatson2131
3 ай бұрын
Nice
@TheBestUni
3 ай бұрын
Thanks
@sarahdoby6353
3 жыл бұрын
Nice🥰
@TheBestUni
3 жыл бұрын
Thank you
@choclitsuga
2 жыл бұрын
how would i slice this if i only have 8 1/2x 11 paper?
@TheBestUni
2 жыл бұрын
I showed it in video
@j.taylor1669
3 жыл бұрын
I have my first order for a rolling tray, where do you purchase your trays?
@rbryson28
3 жыл бұрын
Dollar Tree
@TheBestUni
3 жыл бұрын
Dollar tree
@j.taylor1669
3 жыл бұрын
@@TheBestUni Tried 4 different locations...no luck🤷🏽♀️.
@TheBestUni
3 жыл бұрын
@@j.taylor1669 order off line
@j.taylor1669
3 жыл бұрын
@@TheBestUni Not seeing them, would you mind posting a picture of the tag that's on the back?
@denicarobinson7154
3 жыл бұрын
I love the method but wouldn’t that catch on fire?
@TheBestUni
3 жыл бұрын
Why would fire be on they tray
@shylahpena2135
2 жыл бұрын
Hi what is the clear paper called
@TheBestUni
2 жыл бұрын
Laminate
@justhopeful
3 жыл бұрын
Good evening!
@TheBestUni
3 жыл бұрын
Hello how are you
@justhopeful
3 жыл бұрын
@@TheBestUni I’m good, hope you are too! Love it!
@kidfashtv
2 жыл бұрын
What’s the app you’re using
@TheBestUni
2 жыл бұрын
Cricut design
@PRISSIEBURTN1212
3 жыл бұрын
Heeeeyyyyy Uni
@TheBestUni
3 жыл бұрын
Hi love
@euniceallen904
3 жыл бұрын
Hello all
@TheBestUni
3 жыл бұрын
Hi love
@babygirldavis5
3 жыл бұрын
heyyyyyy boooo!!!!
@TheBestUni
3 жыл бұрын
Hi love
@kashhause6362
3 жыл бұрын
Did you edit this video or you seriously made that in 16 minutes 🤯
Пікірлер: 137