This worked for my 11 year old MFC-7360N. Getting the replacement part properly seated was the trickiest part for me. Your video was invaluable: Excellent camera work and excellent verbal commentary. Thank you for sharing your knowledge. Much appreciated.
@LivewireCommunications
10 ай бұрын
Was ready to pull the trigger and buy a new printer, then found your video. THANK YOU! Crystal clear directions.
@webstertiums
Жыл бұрын
Thank you! Besides helping me to fix my printer (ok, I haven't done it yet, but I am hopeful) this should be required viewing for anyone recording a how-to video. Clear, concise descriptions, a voice that can be understood, no music drowning out the narrative, with a clear view of the parts and pieces throughout. A master class in how to do a "how to do"!
@crystalclay8966
15 күн бұрын
This video saved me from purchasing a new laser printer. I couldn’t agree more with your comment. This video is remarkable. Thank you for contributing to the You Tube body of knowledge, I greatly appreciate your contribution!
@mikecrad29
9 ай бұрын
Excellent video. Very clear, detailed step-by-step instructions. No annoying music, no camera shaking around, and you were very understandable. The way a how-to video should be done. Also, thank you so much for posting this. It kept me from having to buy a new printer.
@thecollegepicker
6 ай бұрын
Appreciate you 👍
@danielzautis5295
3 жыл бұрын
Crystal clear directions. So much easier than a manual. Thanks. Saved us from getting a new printer.
@thecollegepicker
3 жыл бұрын
You are welcome. Saved it from the trash is mission complete in my book 🙌
@jonathansafir3084
Жыл бұрын
You've saved another one from the junk yard! MFC-7460DN - One thing to add: before being able to get the "head" seated behind the cam, FIRST I had to get the piece fully seated on the bottom part, where the "foot" had to be flexed a bit in order to articulate with the slot in the machine. Once I got that inserted, it was easy to get the head easily flexed behind them cam (without the "foot" inserted, the "head" kept popping out from the cam). Thank you so much! $8 for the part (and half an hour) saved my printer (and me from having to replace it entirely). CHEERS !!!
@Graham_Wideman
Жыл бұрын
Well done on a very clear explanation of "the white lever", and how it slides out of position if the "tooth" gets broken. Probably most people will buy a replacement part in this case. However, on my HL2270DW I found I was able to form a stop on the shaft that holds the lever. I slipped an M4 nut over the end of the shaft, which leaves exposed a small amount of the shaft. I then used a soldering iron to melt the shaft inside the nut to hold it in place.
@thecollegepicker
Жыл бұрын
Great solution! Glad I was able to help.
@eearthman499
2 жыл бұрын
Thanks for the help. I followed the instructions and the printer works again. The biggest problem was getting side off. 2270DW. I never was able to find clear visuals of the clips etc. I did it all from beginning to end. Truly appreciated.
@thecollegepicker
2 жыл бұрын
Happy to help 🤝
@laurat2749
10 ай бұрын
Thank you! This video saved us from getting rid of our printer and buying a new one. The $6 part we bought from Amazon was a whole lot cheaper. Your video was very clear and concise. If we ( a couple of seniors) could do this, then anyone can do it. Thank you for your helpful video.
@thecollegepicker
10 ай бұрын
Glad I could help! Good work!
@Tedlorilane
9 ай бұрын
Just finished replacing the broken part, and my 2280DW is once again loading paper. Before I came across your video, I was prepared to accept needing a new printer. Your instructions were flawless. Thank you so very much.
@thecollegepicker
9 ай бұрын
You are welcome. Kept one out of the trash 👍
@user-dx9jc1kl9j
6 ай бұрын
Excellent video and very easy to follow!! My husband was able to do the repair, from start to finish, in under 30 minutes. We also opted for the more expensive one-piece part that was delivered in one day. Thanks again!!
@thecollegepicker
6 ай бұрын
You are welcome. Good work hubby! 👏
@encinobalboa
Жыл бұрын
I got a $10 2270DW today with this problem. Followed the video with success. My cam lever was dislodged and not broken. Turns out my drum is near 100% but toner is around 20%. There was a NIB OEM drum and 2 Quill re-man toners for another $20 so I am all set. Saved a small bundle and kept a good printer out of the landfill. Thanks!
@kfx216
16 күн бұрын
I had to watch it several times, but got it working. Thank you for such a detailed video!!
@Chrislee-we3hk
10 ай бұрын
As a KZitemr myself I needed this printer to work for my scripts. You made a video and it was amazing thank you. Bought the part on Amazon per your link for commission
@thecollegepicker
10 ай бұрын
Glad it helped!
@bradkaral1188
4 ай бұрын
Well filmed. Well narrated. Clearly and simply explained. Great video. Thanks.
@thecollegepicker
4 ай бұрын
I appreciate your appreciation
@domb362
Жыл бұрын
Excellent video. I've seen others that have no dialog or speed up some of the steps to the point of being useless. This was detailed and to the point.
@jonathanplotkin
3 жыл бұрын
Really clear instructions! I had some trouble getting the cam lever seated all the way in but it helped a lot to see how the little bit on the end latched in. Thanks so much!!!
@thecollegepicker
3 жыл бұрын
You are welcome ☺️
@lubradoon
Жыл бұрын
آپ نے بہت ہی عمدہ طریقے سے پرنٹر کو ٹھیک کرنے کا طریقہ بتایا ہے میرا پرنٹر ایچ ایل ٹو ون ٹو تھری زیرو ہے میں نے بڑی آسانی کے ساتھ اپنا مسئلہ حل کر لیا یا آپ کا بہت بہت شکریہ
@arudson1
Жыл бұрын
Thanks very much for your video. I used your video a few times to remember how to fix the little white tab on my HL-2270DW and today to do the full replacement. I ordered my replacement tab from AliExpress - $3.04 Cdn for two with free shipping. Took about 3 weeks for them to arrive but now all is perfect. Thanks
@bobjohnston4325
2 жыл бұрын
Thank you!!! Clear and concise instructions. I was able to reposition the broken feeder cam, fill my paper tray, carefully put the tray back in and continue printing my documents. Ordered a new cam and will replace the broken one. You saved my day!
@thecollegepicker
2 жыл бұрын
Happy to help Bob. Glad you got it going temporarily and going for the future permanent 👍
@natashawright9495
Жыл бұрын
It worked for a ten year old Brother HL-2275DW, THANK YOU! This saved me money, time and effort in not having to buy a new printer yet and this is also better for the environment. Much appreciated!
@thecollegepicker
Жыл бұрын
Love hearing that. You are very welcome
@PhilipAnderson
3 ай бұрын
Thank you so much, exactly what I needed to know to fix my Brother HL2270DW printer. The tiny plastic nub was broken and barely hanging on. Bought a replacement part from Amazon for about $7 and fixed it!!! Only detail for the 2270, there is a retainer tab on the bottom of the side panel in exactly the middle that needs to be released by wedging that point downward on the side cover.
@cptcarot
2 жыл бұрын
Thank you very much, you have saved a printer from landfill. I watched your video after a friend had a printer with the same fault. Checked the printer & the plastic tab was not in the right place, once removed I noticed it was broken. Ordered a part straight away. Thanks again.
@thecollegepicker
2 жыл бұрын
You are welcome. Printer thanks you as well as mother Gaia 🤝
@donaldfennell971
Жыл бұрын
Great instructions. I worked for Xerox for 25 yrs. as a technical rep. I serviced the 914, 813, 4000 series copiers. It was easy for me to follow your instructions. I did notice that the cam may have had some lube on it. I think that a dab of some with lithium grease or vaseline couldn't hurt. Thanks, I can't kill this MFC-7860DW.
@daveruthi
2 жыл бұрын
Fantastic! I couldn't have done it without your help! Thank you so much for sharing this with the "Brother" world in need of repairs! Thank you printer doctor! Amen!
@thecollegepicker
2 жыл бұрын
You are very welcome. Happy to help 🤝
@ElaineKim-yj2rs
3 ай бұрын
Thank you so much for saving me from having to buy a replacement printer!!! I tried everything, including troubleshooting with Brother and looking at other videos, before finding this one. This is the ONLY one that solved the problem. The directions are clear and easy to follow. The trickiest part was getting the piece to sit where it should (such that both the square and the handle are in place). It had to be pushed further down than I initially thought.
@MrNpatel24
15 күн бұрын
I was ready to buy new printer. clear instruction and fixed it with just 13$. THANK YOU!!
@davidbwa
4 ай бұрын
Thank you. AGAIN. This video fixed my problem a couple of years ago. I didn't replace the part - just shoved it back into place. Today, after a couple of years of it working fine, the same problem happened again. I couldn't remember the exact details so looked up this video again - shoved it over again and now I'm printing okay again. This time I've going to purchase the part and replace it.
@thecollegepicker
4 ай бұрын
You are welcome again. Happy to help!
@luisreynoso1734
Жыл бұрын
Excellent instructions! This video should be used as an example of what a how-to video should be like. No music, parts visible, and very good explanations with links to where to get the parts.
@MichelleMcCorkle-k8d
Ай бұрын
I was already looking for a new printer and thought, check KZitem. Thank you so much for your tutorial video. This worked!
@Michael-rx1ud
Жыл бұрын
An excellent and very informative video. I followed the instructions (including the Amazon purchase), received the part within 18 hours of ordering, and was able to complete the repair. I am honestly amazed that it went so well and was so successful (with my fat fumble fingers). Thank you, thank you, thank you!
@terrywilson1319
Сағат бұрын
Thank so very much. Mine was loose.. fixed with your instructions. I am a happy girl now!
@nednedford
Жыл бұрын
You're a freaking genius! I was about to give up on my over 10 year old MFC-7360n and was preparing to purchase a replacement. Then I watched the first part of your video, saw the white tab was dislodged on my printer. I used a hemostat to move it back into position, the error went away and I was able to print. THANK YOU! THANK YOU! THANK YOU!!!
@amitpaulsgill
7 ай бұрын
I am glad I stumbled on this video. You saved me money with this quick fix. I really appreciate your help. 😊
@ramanan86
8 ай бұрын
Thank you so much for this! Saved my printer and my sanity! truly appreciate the time and effort put into this incredible how to video!!
@stevefromjustimagine161
Жыл бұрын
I normally don't leave comments, but the instructions were clear and I feel, very thought out to make this an easy fix, thanks.
@thecollegepicker
Жыл бұрын
Happy to help and happy to hear the feedback 🙏
@STAR-bp8zk
Жыл бұрын
You are truly the best. my hubby fixed this and I am one happy lady!! You are the gift that keeps on giving!! hugs!
@thecollegepicker
Жыл бұрын
Wow good on him! This isn't a super easy fix. So happy to hear that 💪
@reeseroubedeaux5532
19 күн бұрын
AHH thank you so much for this video, all the other info online that I was seeing just kept saying that the printer rolls were dusty and after I cleaned those nothing changed, I followed your directions and found out that the little tooth part on mine was broken as well! I ordered it off of your link and I'm hopeful that everything will be running smoothly after!
@ChakaStarkes
10 ай бұрын
Thank you so much! Perfectly detailed and informative. You saved me from buying a new printer
@billschardt6432
4 ай бұрын
Great video. I fixed my printer for less than £5, and I was thinking of buying a new one. Mind you it wasn't as easy as the video made it look but I got there in the end!
@dspirakes21
11 ай бұрын
Amazing video!! Instructions were very clear and simple. We got our printer working again!! Thank you very much for creating and sharing this video 👏🏼🙌🏼
@lawrencejosephmayer
Жыл бұрын
So easy when you see what's needed Downloading the manuals were useless. Than you so much.
@Longhiver
Жыл бұрын
OMG! IT FRACKING WORKED! I've been using my printer with the manual feeder for the last 2 years. hahahaha! Just had to put the white plastic piece in place. Thank you soooo much.
@lubradoon
Жыл бұрын
I have HL-2130 and after your instruction video, I was able to fix it ver easily and to the point. I even used the old part ... :) Thank you so much
@chuckysmom4142
Жыл бұрын
Followed the instructions and now my print works!! 🙏🏾 🎉
@plyavali
2 жыл бұрын
Thank you for taking the time to make this video. And for providing the link to replacement piece🙏 Mine chipped and that's why it's not staying in place. I was able to print a test paper before it slid back out. But thanks to you, I know the issue, and I should be set once the replacement arrives
@korbindallas-os1vi
10 ай бұрын
Great instructions! Easy to follow. I was able to fix my printer just by following steps from this video. Thank you!
@thegreatfixer
2 жыл бұрын
finally you win there must be 20 or more and after 8 or more yours is the clearest most concise thank you
@thecollegepicker
2 жыл бұрын
Appreciate the win 🙏
@Krishnadeep0013
8 ай бұрын
Super clear step by step directions. Great work with camera and also accurate information. Just fixed one of them. Thank you very much for this video, god bless you!
@tuneheister1956
Жыл бұрын
I tried to install my new cam lever 5 time. Viewd 5 or 6 KZitem videos. Yours is the only one that really showed me how to do it. Thanks.
@thecollegepicker
Жыл бұрын
You are welcome 🤝
@rayofvictory
2 жыл бұрын
Wow, you are an absolute godsend! Perfect video. I was this close to ditching this but paused about the landfill. A quick search and your video popped on the search. Keep rocking with instructional videos like these. Thanks a bunch!
@thecollegepicker
2 жыл бұрын
Saved it from the 🗑️. 👍 Happy to help.
@benjaminkukkee286
4 ай бұрын
I fixed my mom's MFC-7360N with this video. It took 2 attempts, but it worked. Thanks!
@sumit84ky
2 жыл бұрын
Thank you so much! Your video helped me found the broken feeder issue. For now it is working after re-position, not sure till when. Thank you again for the part number, ordered a new one. You are amazing...
@thecollegepicker
2 жыл бұрын
You are welcome. Happy to help
@caeengineersllc.5444
2 жыл бұрын
Excellent video and instructions. It was that cam that came loose; and when I repositioned it the paper feed mechanism works well and my printer is back in service! Thanks a bunch. Saved me the aggravation of shopping for a new printer and hooking up to WiFi. - Charles 3/3/2022
@thecollegepicker
2 жыл бұрын
Thanks for watching Charles, happy to help 😃
@yuriz7364
Жыл бұрын
Thanks, your tutorial works perfectly! The plastic part had the retainer lip broken off but I didn't feel like buying a new one. So I found a plastic collar in my parts bin and I pressure fit it over the black plastic peg that holds the faulty part in place. Maybe you can find a nut that would fit on the black peg so the fix is permanent. Great work!
@contrabanjo1
Жыл бұрын
Brilliant! Thank you. I'm so glad I don't have to buy a new printer and figure out how to dispose of one. ❤❤❤
@CurtisJemand
Жыл бұрын
That cam did it for me, overnighted a replacement and was back on track, thanks so much!
@thecollegepicker
Жыл бұрын
Good deal!
@rossbrowning1337
11 күн бұрын
This video is amazing and rescued a 10 year old highschool printer!
@thecollegepicker
11 күн бұрын
Happy to help 🤝
@nancym1430
6 ай бұрын
Thank you so much! I had this exact problem and Fix #1 worked -- we'll see if the problem occurs again, but then I'll go to Fix #2. I love this printer, so thank you for sharing how to keep it running!
@thecollegepicker
6 ай бұрын
You are welcome. Another one saved from a landfill ✅
@skycandyastronomy
Жыл бұрын
Awesome job filming and explaining, thank you very much, you helped me save my precious printer! ONLY thing I would add is, at 7:43, you slide the part underneath the cam gear and say "That's what you need it to do." then you are silent ... but we can HEAR the CLICK of the tooth (the part that was broken) attaching to the printer frame as you use your index finger and engage the part a little. But it will ONLY click and attach if you move it a little. So, at 7:45, I would add: "Then move or engage the part a little until you hear the CLICK of the tooth attaching to the frame."
@GoldmanAssociatesI
Жыл бұрын
This is a better video with clearer instructions than the other videos I have seen. Well done sir! Thank you.
@thecollegepicker
Жыл бұрын
Thank you 🙏
@millbrookgardenclub364
Жыл бұрын
Loved the unhappy face and the guys with the bat - so glad I don't have to smash up MY printer!! Thanks so much.
@jochalli8691
Жыл бұрын
It worked! I have had this Brother printer for 11 years and love it. Thanks for the clear instructions. Glad the printer did not end up in a junk yard. 😉
@thecollegepicker
Жыл бұрын
You're welcome! Merry Christmas
@Necator
Жыл бұрын
Thanks! You saved my printer! The cam lever tab was hidden after transport and storage.
@jurgenwittmann2905
Жыл бұрын
Many thanks for this repair tutorial. Now I was able to repair the printer for 9 euros. You saved me buying a new printer again. This is now the second printer with the same problem. Luckily I still have the first one (slightly different type but same parts), which I will now also repair.
@javariasajjad6499
Жыл бұрын
Thank you so much for this video; I was able to fix my printer and get it working. Very clear and understanding instructions. Truly appreciated.
@cokie9770
Жыл бұрын
Excellent video. I used your instructions and the links and managed to fix my printer. Thank you very much.
@DonMacFadgen
3 ай бұрын
Awesome, crystal clear instructions, worked like a charm (used existing cam lever) that had become dislodged. Very pleased with video..
@dismentei
2 жыл бұрын
Good job, man, your video worked perfectly for a DCP-7065dn and so I saved 200 euros of a new printer, thanx a lot!
@thecollegepicker
2 жыл бұрын
You are welcome 🤠 happy to help you save them euros
@williamcrosby4354
11 ай бұрын
This was a great video, that spawned a fix at my end. One suggestion; between 7:30 and 8:00 of the video, perhaps mention that the tag ('tooth') needs to be inserted through the crescent-shaped guide in order to be fully seated properly. As soon as I saw that, everything was 'singing & dancing'. Thanks again!
@antoniogiamberardino602
4 ай бұрын
I had to pull the tab back in! Thanks for the help!! Today was a stressful enough day.
@thecollegepicker
4 ай бұрын
Glad it helped!
@antoniogiamberardino602
2 ай бұрын
@@thecollegepickerok, so now I have a new question, lol... The cam lever eventually gave up the ghost. Ordered a new one, installed it, etc. The white plastic tab doesn't seem to come through to the paper tray as much as the one in your video, and although it appears to lift up the front flap of paper, nothing slides through to the printer itself. Any suggestions on what to check?
@mishasta
2 жыл бұрын
I've been so frustrated with my HL2240D for the past few weeks. So hard to find a replacement printer, or it now cost 3 times what I got it for a few years ago. I thought I needed to replace the paper tray, and ebay has them for at least 30 bucks or more with additional shipping cost! Your video was so thorough! I fixed it! Thanks!
@thecollegepicker
2 жыл бұрын
You are welcome. Happy to save you time money and stress. 💪
@mpaul2012
2 жыл бұрын
Thank you for the detailed instructions 👍 So glad I didn't have to get a new printer.
@jjglj
Жыл бұрын
Thanks a lot, I was able to fix my printer with your video instruction, very clear and to the point. especially the part about taking off the side cover.
@thecollegepicker
Жыл бұрын
You are welcome, did you have to replace the part?
@billcostagliola4548
4 ай бұрын
Great tutorial! Fixed the problem. My part just jumped off and had to be put back into place
@leonardedgarsr2014
2 жыл бұрын
The hack on the paper tray worked and saved my bacon..Thanks!!!! I thought my printer had gone belly-up!!
@thecollegepicker
2 жыл бұрын
You are welcome. Happy to help
@melindarimmermusic
9 ай бұрын
Thank you so much for going through the effort of making this video, and making it so detailed. I was about to give up on my old printer that would have been more expensive to fix than it is worth. But I really didn't like the idea of having to get rid of a printer that up to a certain point served me without ever having any issues. That point was a house move as well, so I was pretty sure, something mechanical must have been going on. I just needed to nudge that little white plastic thing back into place and now it's working again! And if it ever breaks off completely, I know where to turn to to fix it again. Thank you for allowing me to not only save our wallet but also reduce waste that would have been completely unnecessary!
@pjojensen
9 күн бұрын
Great video! I've looked at others and yours has the bese (by far!) video and description of all the details.
@stephennyarko5203
2 жыл бұрын
I don’t usually comment on videos, but I had to for this one. Excellent Tutorial!!!!!!!!
@roxyrvas
Жыл бұрын
Holy crap dude you saved my printer. Thank you
@markbailey4516
9 ай бұрын
Realigned the cam lever tab and Bob's your uncle. Thank so much!
@thecollegepicker
9 ай бұрын
That is awesome!
@Ali-qt8en
Жыл бұрын
amazing video, helped save my printer 5 stars! followed your directions to the T
@JohnUpton-mw6el
Жыл бұрын
Thanks so much. It's a mystery to me why that little tooth is designed to be such a dainty little part when it will get jostled every time the paper tray is removed and replaced. I'm amazed the original lasted as long as it did. I put a smudge of silicone grease in the track where the tooth runs, just for luck. Printer is back on line and working great!
@pspatil2302
3 жыл бұрын
Eric, You have explained it well, so methodical Thank you
@thecollegepicker
3 жыл бұрын
You are welcome. I strive to do it as such 🙏🙏
@andymiller54
2 жыл бұрын
I would have given this printer to goodwill if I hadn't found this. Exactly my problem. Thanks for the clear instructions!
@thecollegepicker
2 жыл бұрын
You are welcome 🤠
@GG-pl9jm
2 жыл бұрын
2021.10.24 So clear and direct. No waste of time. Well presented. Thanks, I'm ordering the part as soon as I find it.
@thecollegepicker
2 жыл бұрын
You are very welcome ☺️
@richhagedus5721
7 ай бұрын
THANK YOU! really well done video, saved me from having to buy a new printer! and funny too
@damariswebb7499
2 жыл бұрын
Thank you!!! Easy to follow instructions. I too, was able to reposition the broken feeder cam, fill my paper tray, put the tray back in, and can print documents! I have ordered the new cam and will replace the broken one. Huzzah!!
@thecollegepicker
2 жыл бұрын
You are welcome. Good work!
@danielrushing2846
8 ай бұрын
Great video. I have been watching you for a long time. Started with your reselling videos and your collabs with the Bonafide Hustler with Raiken Profits. This how to video was great and easy to follow. I was able to repair my printer with ease. Thanks!
@mikemessenger36
2 ай бұрын
Nice work. Easy (temporary for now) fix with no mess - even thought I almost snapped off something putting the cover back on ha. Plus ate up a half hour of work time. Win/Win.
@SatisfiedCustomer-oj7nr
Жыл бұрын
Great job! Clear, concise and good visuals.
@dchahin1980
Жыл бұрын
Great video. I was able to fix my Brother printers just for a couple of bucks. Thank you
@mamaryfromthesouth9869
Жыл бұрын
Great video I just finished watching and was able to fix my printer following your video instructions 👍🏽
@thecollegepicker
Жыл бұрын
Thanks for watching, I appreciate the support and glad you got it fixed
@dbknox
Жыл бұрын
Thank you for the video. With your instruction, I was able to save my printer - at least for a little bit longer.
@thecollegepicker
Жыл бұрын
Glad it helped 🤝
@eugeneshia4937
8 ай бұрын
Totally worked! Loved the concise detailed explanation. Thanks!
@coppcar
Жыл бұрын
Well done TCP. For all the reasons others have stated. Thank you.
@hifza9413
Жыл бұрын
Clear and easy instruction and especially for the exact replacement part link. Thank you for helping share how to repair, rather than discard large devices.
@edvel4949
Жыл бұрын
this video really help me and save money to my brother HL-2280DW..thank you
@soulsurfer4441
2 жыл бұрын
Awesome video. You got me up and running again. I moved recently and had the boxed printer in the uhaul. Guess it got bounced around to much. When taking it apart I found a tiny piece of broken white plastic on the feeder wheel. Put it all back together and now she works. You da man!
@thecollegepicker
2 жыл бұрын
Good work! Happy to help. Enjoy your new place 🤝
@fjbrady
Жыл бұрын
Thank you thank you thank you. I've fixed this before bur didn't know about removing the motor. MUCH easier.
Пікірлер: 315