Oh my gosh, this was one of the best videos!!! You did such an awesome job explaining things and made it so easy to understand. 🙌
@coltondeanda8383
2 жыл бұрын
I’m going to Disney this year for the first time in my life, and I’m a very crafty person; this really helped me create the ears I want to have!!
@stephanieb.5636
3 жыл бұрын
THANK YOU! THANK YOU! THANK YOU! for this tutorial and patterns. I was excited to find something that I can use with my Cricut Maker. I even went so far as to create a pattern for the headband wrap too. ;) (I was struggling to get that cut so it was easy to work with. HA HA) We leave in a week and these are going to be so much fun!!
@aimeesims4
3 жыл бұрын
I just bought the Cricut Maker and I’m a huge Disney fan, I can’t wait to make these ears, great video!
@adlygaray351
3 жыл бұрын
Thanks !! I have 2 little sis and a baby that are going to love these !!
@laydeepinky628
2 жыл бұрын
thank you for the detailed video. I'm going to attempt to make my coworkers daughter some ears for her birthday. Now, I'm on the hunt for the rotary blade in stores since my Cricut Maker didn't come with that blade
@mariperez1629
Жыл бұрын
These are so amazing 🤩 I love them my daughter hates headbands bc she says they hurt so I have been trying to make these in a hair clip version and have been failing every time. Do you have any suggestions or possibly a video??
@CorinneBlackstone
Жыл бұрын
I don’t have a hair clip version but you could just order some hair clips and see which ones the ears fit on. I would just do that. Get like the plastic kind
@tammypottinger3691
4 жыл бұрын
I know! The rotary blade is the bomb!
@shelleymaclean3301
4 жыл бұрын
Love your videos. I enjoy your positivity... always reassuring us that “it’s fine”. I giggle every time I watch one😊
@CorinneBlackstone
4 жыл бұрын
Hahaha thank you! My friends always joke that could have my foot cut off and I'd say oh it's fine I'll just cricut a new one!
@joancook8454
4 жыл бұрын
you could also use piping and glue it to one side of the ear before adding the other half of the ear, it would provide a lower profile of the edge, although the braiding does accent the ears . TFS
@itsmarlene1
Жыл бұрын
Hi, thank you so much for this! I made my first pair and they turned out great! The only issue I’m having is they fall forward when I move my head. 😭Anything you can suggest I do to keep this from happening other than keep them in place with bobby pins? I don’t know if it’s the weight causing this.
@CorinneBlackstone
Жыл бұрын
The velvet ribbon helps with that but also make sure you are not making them super heavy. I have a pair that’s pretty heavy from the charm I used on the bow and they fall forward and my full rhinestone ears do the same because they are super heavy
@itsmarlene1
Жыл бұрын
@@CorinneBlackstone Thank you!
@natalieruby7934
4 жыл бұрын
Thank you SO SO SOOOO much for this video!! I've been making these for the last 2 yrs, and I used to use the poster board foam. Wasnt working well. I love your routine and the materials you are using. I will be updating my wars, thank you!!!
@bodiejairo2140
3 жыл бұрын
I dont mean to be so off topic but does anyone know of a method to get back into an Instagram account?? I was stupid lost my password. I would appreciate any assistance you can offer me!
@reignsamir5442
3 жыл бұрын
@Bodie Jairo Instablaster =)
@bodiejairo2140
3 жыл бұрын
@Reign Samir thanks for your reply. I got to the site thru google and im trying it out atm. I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@bodiejairo2140
3 жыл бұрын
@Reign Samir It worked and I finally got access to my account again. Im so happy! Thank you so much you saved my ass!
@reignsamir5442
3 жыл бұрын
@Bodie Jairo Glad I could help xD
@FourKingdomTrekkers
2 жыл бұрын
Those ears turned out very cute! Great video!
@CorinneBlackstone
2 жыл бұрын
Thank you so much!
@dileniahernandez6418
4 жыл бұрын
I love it and I can’t wait to make one, thanks you this video.
@ssharp11
4 жыл бұрын
Awesome project. Excellent start to finish tutorial. Thank you. Wishing you a super week. Hugs Susan
@patches301
4 жыл бұрын
Absolutely Beautiful!
@CorinneBlackstone
4 жыл бұрын
Thank you!
@desiraeboussad2904
4 жыл бұрын
Thanks for sharing!!!! I can’t wait to make these!
@CorinneBlackstone
4 жыл бұрын
You're welcome! I hope you have fun!
@katygonzalez3726
3 жыл бұрын
Love it!!
@kaitlyneyester643
4 жыл бұрын
This was such a good video!! Thank you! 💘
@tracyjones2117
4 жыл бұрын
What type of foam do you use? Is it just the craft foam that you would buy at Michaels?
@CorinneBlackstone
4 жыл бұрын
It's called eva foam. It's used in cosplay. Joann fabrics sells it
@tracyjones2117
4 жыл бұрын
@@CorinneBlackstone What width do you use?
@CorinneBlackstone
4 жыл бұрын
@@tracyjones2117 it comes in a big poster board sized sheet
@tracyjones2117
4 жыл бұрын
@@CorinneBlackstone What is the mm that you use?
@CorinneBlackstone
4 жыл бұрын
@@tracyjones2117 2 mm
@beccable08
2 жыл бұрын
Hi! Love the tutorial!!! I was trying to look for the template but I couldn’t find it? Is it still available? I would love to make some ears for our trip later this month
@CorinneBlackstone
2 жыл бұрын
Yes go to Corinneblackstone.com and sign up with the website totally free. Then it’s under member area free svgs
@beccable08
2 жыл бұрын
Do you happen to have a tutorial on how to do the birthday cupcake ears?
@CorinneBlackstone
2 жыл бұрын
@@beccable08 no. I just cut a cupcake SVG out of felt
@LucyLu70
4 жыл бұрын
Thank you for this video. The template for the ears wont work off my phone or ipad do we need to access it on a computer to load into design space?
@CorinneBlackstone
4 жыл бұрын
Yes it will need to be accessed through a computer
@Adriana.244
2 жыл бұрын
Parabéns pelo lindo trabalho!!👏👏😍❤❤
@erindoesthethings
2 жыл бұрын
Dumb question..could this work with faux leather sheets
@CorinneBlackstone
2 жыл бұрын
Yes absolutely they are a little harder to get to lay flat on the edges but it can be done :)
@lindafranz7416
3 жыл бұрын
This is for Cricut Maker only?
@CorinneBlackstone
3 жыл бұрын
It works best with the maker due to the fact that it cuts fabrics better but it can be done with the explore but you’ll need to bond the fabrics. You can use wax paper or even transfer tape can work as a bonding agent
@cynthialong3543
3 жыл бұрын
These came out soooooo beautiful. Thank you for sharing. BTW what is a minky fabric could I ask at joanns for that name?
@CorinneBlackstone
3 жыл бұрын
It’s called minky they will know what you are looking for
@cynthialong3543
3 жыл бұрын
Awesome thank you
@debbieharrison567
4 жыл бұрын
Love it!
@tinalee9863
3 жыл бұрын
Great tutorial! Can this be used for bear ears too?
@CorinneBlackstone
3 жыл бұрын
I don’t see why not. They are the same shape :)
@michellebarrios3227
Жыл бұрын
What size is the felt ribbon you use for the under lining of the headband?
@CorinneBlackstone
Жыл бұрын
1/4 inch it’s velvet
@michellebarrios3227
Жыл бұрын
Thank you so much!!!! Love your videos
@CorinneBlackstone
Жыл бұрын
@@michellebarrios3227 you’re welcome! Check joann Christmas clearance ribbon. Thats where I always find it
@kathybresson9784
4 жыл бұрын
Fantastic
@horcruxgirl777
4 жыл бұрын
So informative! Thank you so much! I tried downloading the templates, but the fabric one said it was saved as "private" in design space and would not open....is there another way to download? Also, what width velvet ribbon did you use? 3/8??
@CorinneBlackstone
4 жыл бұрын
I have no idea why its saying private but I will check on it today. no one else has had the issue.
@tinadavidhizar9308
4 жыл бұрын
What thickness of foam do you use?
@CorinneBlackstone
4 жыл бұрын
2MM
@melaniesandoval2921
4 жыл бұрын
Does it work for the cricut explorer 2
@ALB4EVER05
4 жыл бұрын
Neat love it 😍
@tammypottinger3691
4 жыл бұрын
If you cut twice, will it cut thru?
@CorinneBlackstone
4 жыл бұрын
its cut three times and when it cut through it tended to lift the pieces a little bit so its easier and gave a much cleaner cut to just punch them out of the foam.
@eileenmuccillo8047
4 жыл бұрын
My maker did not come with the rotary thing I had to buy it separate
@giselleg859
4 жыл бұрын
Where do you find those gems you put on your bow?
@CorinneBlackstone
4 жыл бұрын
I got them at Joanns It was these exact ones go.magik.ly/ml/ugha/
@faaeagaoupu5056
3 жыл бұрын
what is the final size for the one with the square?
@CorinneBlackstone
3 жыл бұрын
It’s all in the templates
@tammypottinger3691
4 жыл бұрын
Wholly crap! Looks like you’ve exploded Mickey ears all over your craft room!😂
@CorinneBlackstone
4 жыл бұрын
More like my entire house! LOL I am loving making these and I love how they are one of a kind!
@shescreamedno
4 жыл бұрын
What kind of glue gun are you using. I need something like that in my life.
@CorinneBlackstone
4 жыл бұрын
Its a Ryobi cordless gun from Home depot! I LOVE IT!!!
@saralightgirl2001
3 жыл бұрын
Please teach me how to make Mickey ears inspired the Disney villain Dr. Facilier with a top hat?
@breannanunziato9754
3 жыл бұрын
Can I do this with my cricut air?
@CorinneBlackstone
3 жыл бұрын
The air requires a bonded fabric meaning you need stiffer fabric but yes it can be done
@breannanunziato9754
3 жыл бұрын
@@CorinneBlackstone thank you!
@adlygaray351
3 жыл бұрын
Can the air 2 cut fabric?
@CorinneBlackstone
3 жыл бұрын
Bonded fabric yes :)
@heatherwarmbier8023
4 жыл бұрын
Where do you get your EVA foam?
@heatherwarmbier8023
4 жыл бұрын
And will 2mm craft foam not work since we are doubling it?
@come_with_me_to_disney5300
3 жыл бұрын
how thick is your foam
@CorinneBlackstone
3 жыл бұрын
About 1.5 mm
@dillmanfamily8702
2 жыл бұрын
Why do we have to put our credit card in for the template. If it’s free it makes no sense
@CorinneBlackstone
2 жыл бұрын
You don’t. Sounds like you clicked on an add and not the actual download template.
@magicalmiranda6030
4 жыл бұрын
Yeah ears are cute but WHERE DID YOU GET THIS HOT GLUE GUN!?
@candicer
3 жыл бұрын
This glue gun is made by ryobi. I got mine on Amazon. You probably already got the answer since this was a year ago. Lol 😆 just thought I'd share where I got mine.
@thecraftysparrow
3 жыл бұрын
@@candicer … I just bought one over the weekend from Home Depot. My son is thrilled since half of his workshop is Ryobi…. Worked out pretty great for me since I needed to steal a battery… LOL
@candicer
3 жыл бұрын
@@thecraftysparrow it works great for me too. A little bigger with the battery on. But not having a cord get in my way so amazing! They make a smaller version I recently discovered I may check it out.
@perla2422
4 жыл бұрын
Am I the only one who took the plastic cover of their rotary blade? Still works fine just wondering?
@CorinneBlackstone
4 жыл бұрын
I never have just cause it's there. Lol I'm sure it's there for a reason. Maybe to keep things from getting caught in it like your hair or clothing if you are looking over the machine?
Every time I use a glue gun my ears look awful because no matter how careful I am there’s stringy stuff etc that sticks to the fabric and won’t come off
@CorinneBlackstone
4 жыл бұрын
Get a better glue or glue gun. Mine leaves strings sometimes but not so bad I can't remove them.
@DanielleMarie19881
4 жыл бұрын
First
@CorinneBlackstone
4 жыл бұрын
WHOO! First is always fun! :)
@DanielleMarie19881
4 жыл бұрын
Corinne Blackstone OMG I didn’t realise I would be first this is a dream to be replied by a you tuber!!!
@CorinneBlackstone
4 жыл бұрын
@@DanielleMarie19881 Hey I'm just a regular girl who loves to craft! :) nothing terribly exciting but I do love sharing knowledge
@kaylaash8421
2 жыл бұрын
Disney villains
@Nanna2five
3 жыл бұрын
What thickness of foam do you use
@CorinneBlackstone
3 жыл бұрын
It’s a little under 2MM it’s just Eva foam but you can use craft foam as well
Пікірлер: 107