Hey guys, Jim from Import Image Racing, and welcome back to the channel! In this week's video, we're installing the Noble "TS" Style side markers for your 2022 to present Subaru BRZ or Toyota GR86. Let's go! While this video is mainly an installation how-to, let's touch on the product since we have it on the table. The TS side marker is a smooth-face, vertical LED-equipped, full-replacement side marker that comes in your choice of clear or smoked lenses. You've probably figured it out by now that the TS in the name stands for turn signal, which means this kit comes with the provided plug-and-play harness to adapt that function. Awesome, so let's touch on the installation. Although our car is on a lift and the front wheel removed, this is simply for visual aid in this video. You can start the vehicle and turn the front wheels to allow better access to the clips and hardware. With that being said, let's get started.
Our first step is to grab a pick or a Phillips head screwdriver, whatever you have, and press and release the three plastic push pins that attach the fender liner to the front bumper. Next, we can peel back the inner fender liner and expose our 10 mm securing nut. Remove this nut with a 10 mm wrench, disconnect our small two-wire connector by pressing the tab and releasing, and press and release the two plastic securing tabs. Under the hood, locate the main headlight connector, which is located here, and push and release the plastic connector in order to install our brand new piggyback harness. Our next step is to locate our turn signal activation wire and run this wire from underneath the headlight until we reach our side marker on the outside. This part can be a little frustrating, and you might not get it out there the first time, but believe me, you can do it. I have all the confidence in you. Here's a small tech tip for you guys: since our trigger wire comes out the top where our plastic connector is, I would run our harness through this top hole. We are using the ground from our factory connector, so you'll want to plug that connector in. Then, what I highly recommend doing is checking for functionality of our light before we go and reinstall everything for a final time. Alright, looking good! It looks like everything is working and functioning properly. At this point in time, we can just snap the light back into place and, using the original factory 10 mm nut, we can finally secure our light into the bumper. Lastly, with the securing nut tight, we can reinstall our plastic clips.
Thanks for taking a look at the installation of the Noble TS Style side markers for the 2022 to present Subaru BRZ and Toyota GR86. For thousands of parts just like this, plus tons more, be sure to hit up importimageracing.com for all the best deals on the web and in the world. Don't forget to like and subscribe, and we'll catch you on the next one!
FIND IT HERE!👇🏼👇🏼👇🏼
Noble LUX Sequential Sidemarker w/ Turn Signal (Smoked) - 2022+ BRZ / GR86:
www.importimageracing.com/pro...
Import Image ➡️ tinyurl.com/y2uwsz92
Cosmis ➡️ tinyurl.com/y6sx7fyw
Silvers ➡️ tinyurl.com/y4wq9uc8
Give a Like 👍 / officialimportimageracing
Follow us 🔥 / importimageracing
Негізгі бет Автокөліктер мен көлік құралдары Noble LUX Sequential Sidemarker w/ Turn Signal INSTALLATION | 2022+ BRZ / GR86 | SUBARU | TOYOTA
Пікірлер: 9