Very fun vid🎉 I did an engine rebuild tonight myself. Thanks for sharing this one with us
@jeremywilliamsrc8797
Жыл бұрын
Awesome videos brother.my good buddy showed me your channel and your content is top notch. Awesome stuff and glad I found this channel!
@ZingZingNZ
Жыл бұрын
Hey mate, I am in New Zealand and I have been importing those performa engines from absolute hobbies. They have been 180 usd It what I learned on this year, then the blue o.s xyb now I just got a ad3
@adamsrcsandadventure700
Жыл бұрын
Cool vid mate 👍 nice looking engines good value $ might pick one up 👌 hi from 🇦🇺
@NitroTalkwithTodd
Жыл бұрын
Should be easier to get over there. Thanks for watching
@brandonpfister
6 ай бұрын
Watching this for the second time! 😊
@RcOffroad9513
16 күн бұрын
Nice looking engine! I want 1! Lol 👍
@ElDiabl0187
Жыл бұрын
Sweet engine haul
@ofnaguycarlwatts8602
Жыл бұрын
Great video Man I was in suspense . couldn't wait to see the insides of this engine.i have a bunch of Force engines and I love them.i modified a few .28 and .32s and made a monster of engines out of them.i did watch entire video.great job man.could we talk privately some. I think you would enjoy the conversation.thx again Man for the content much appreciated here!!
@NitroTalkwithTodd
Жыл бұрын
I'd be down to talk shop, most of my free time is late at night, that's when I make my videos.
@RCscottyZ
Жыл бұрын
Hey I forgot to mention,, the reason I’m reaching out is because I’m green ,, but eyes and ears WIDE OPEN to get into the next level of nitro rc ,,, tearing down and reassembling nitro motors
@RCscottyZ
Жыл бұрын
Oops , like I was saying the heart and soul of any nitro rc . The Engjne !!!! I wanna know how to take one apart in 15 min with time To Spare .! Ok now gotta go
@islandrc-duke1972
Жыл бұрын
awesome nitro engines and tear down,great info and video
@ifly65
Жыл бұрын
I was hoping the fourth one was a new model or blue head by mistake. That would have been classic...to have over 1k in a 5 motor collection.
@LDizzy1
Жыл бұрын
Hi. Great Channel. I'm going to upload a video of my two Force pro .21 and .28 engines for you The 21r37 is the latest engine Force came out with. It came out after the release of the 21rz2. Out of the two the 21rz2 has better performance specs, (RPMS & HP), which is why I chose the 21rz2 over the 21r37. The E-21R37 is a OS Speed xzb spec1 clone.
@markalan4026
Жыл бұрын
Appears to be a nice engine for the money.
@rcaddictgarage
Жыл бұрын
👍
@daniely30
Жыл бұрын
Nice vid. Im new to nitro my first engine that i purchased was force .32. Its not that great. But these look great the one with shorter head looks 🔥
@NitroTalkwithTodd
Жыл бұрын
I am very impressed with these engines so far, I cannot wait to run one!
@ofnaguycarlwatts8602
Жыл бұрын
Wanna sell that.32 .thx
@rbrown_barber4231
Жыл бұрын
When are you going to do the clutch videos?
@NitroTalkwithTodd
Жыл бұрын
I've already tried to record it once, it was over an hour. I'll give it another shot soon, thanks for watching.
@GSkill-nm3wv
Жыл бұрын
I have a Force .21 delta 8T. It's an engine that there is little information on the internet about.
@NitroTalkwithTodd
Жыл бұрын
The Delta Force, one I have had my eye out for for years. Unique cooling head. I always see them in magazines but never laid my hands on one. Nice 👍
@Grandpasrcbarn
Жыл бұрын
You do great job Would be awesome if you send one of those engines to me lol Those engines are very cool
@NitroTalkwithTodd
Жыл бұрын
I don't know why they aren't more widely known, they have been making them since at least 2010!
@Grandpasrcbarn
Жыл бұрын
@@NitroTalkwithTodd I would love to pick up an engine like that does force make the HPI engines
@cammac1393
Жыл бұрын
I wish I had the willpower to not open the engines I'm not using. I get thinking there may be a defect or something isn't right with it in the internals so I always end up opening them lol
@RCscottyZ
Жыл бұрын
Todd , you are speaking my langurs about the “ not run of the mill engines / cars / truggys … so Todd you compare your motors w OS at the track etc . I unfortunately do not have ANY TRACKS BY ME IN WOODSTOCK IL So I am also a buggy / truggy lover . I have 3 high end buggys 4 high / midrange quality truggys .. ok, Recommendations on top 3 standard : big block engines to get broken in and installed by the time spring hits . I have fallen for “ REDS “ engines . I have 3 of them . Scuderia gen 1 And gen 2 . I have found they run so clean and have a TON OF TORQUE ! You run them before ??
@NitroTalkwithTodd
Жыл бұрын
I haven't ran the Scuderia, but one of my buddies at the track runs one, and I've ran an R5R. All top shelf engines. Most of the stuff I run are what I would call "budget" race engines, usually $150-$250. I spend more money on engines that I collect than on ones I run. I have found that I get around the track no faster with an OS Speed than with an SH. Now recommendations for top engines, top meaning money no object, there are plenty of great engines out there right now. Probably my first choice would be the Protek Samurai, it's basically an OS Speed for less money. Fantastic engine that you'll see 4 or 5 of in every race. I also see a few Blok engines, they seem to be pretty popular. And you can't go wrong with any OS Speed. Certainly the cream of the crop. Sucks you don't have a track nearby, I fell in love with driving on a track, made me give up parking lots cold turkey.
@jdportwerks6795
Күн бұрын
Finally got around to one of these from absolute hobbies 5 port! This is about the worst engine known to man and the worst investment that I’ve made on this junk!!!! It’s not fast whatsoever the carburetor sticks it runs extremely hot no matter if you set the tune rich as ever! So in my opinion save your money to anyone looking into buying one of these! This motor was so bad that I took kyosho . 21KE motor and installed a Werks Carb on it and that even ran literally ran circles around this force motor! With that being said Todd I’m glad you’ve gotten positive results out of this brand motor! I’ve even had better luck with old track star motor over this trash. Just my $.02 #saveyourmoney #junk
@bryanglover3217
Жыл бұрын
Mr nostalgia nitro rc .👍
@markalan4026
Жыл бұрын
Id say they seen you coming!! Now they got ya on the hook to purchase at least 2 more of them engines 🤣
@markalan4026
Жыл бұрын
make that 3 engines 😆
@needmoreboost6369
Жыл бұрын
I’ll never part with my delta 8 port lol
@thomasteigen2793
Жыл бұрын
That engine is the same hpi sold as hpi f3,5 pro in around 2010 and came in 2013 with some changes I dont remember. I am pretty sure its the same engine just with another cooling head. I think i have four or five of them. All of them is the first version. Not great engines, but good for the money you pay for them.
Пікірлер: 36