I think based on your earlier videos that F 62 is for overhead speakers and F 61 is only for sets, but in this video you said that F 62 was only for sets.
@gregmetcalfe9895
4 жыл бұрын
Hi Nortel guy. Wondering if I can forward from my nortel system to my cell phone when not at the office?
@timmiowen5005
4 жыл бұрын
Hello. Thank you for taking the time to add all of this helpful information. We have M7310 Nortel phones and I can not find the "configurations" option using the configuration admin **266344. I need to change some of my single memory buttons and can not find where to do that. Do you already have a video for that? Thank you again.
@glenmartin7995
6 жыл бұрын
Learned a bunch of handy stuff - thanks so much!
@drene9261
4 жыл бұрын
Thanks very much for this. Newer system. I get to the capabilities and FWD TO part BUT when I try to enter in the 3 digit extension that the phone is (and vm should be directed to), it only lets me type in 2 digits. Not a 3rd. The extension is working properly, accepting calls, making calls to that extension #, voicemail set up. But the phone will not go to voicemail - just keeps ringing. Not sure what step I am missing prior to the FWD TO part. Please let me know if you can shed light. Thank you.
@hilaryjuberg6482
7 жыл бұрын
We have M7324 front desk phone and M7310 around the office. One M7310 is up and running, but when I add another phone to the empty lines the new phones all ring to the existing phone and not to outside lines?
@lindaclark7762
2 жыл бұрын
Hello. Trying to have a group of phones that can pick up incoming call from main set.
@dawnbueno8416
6 жыл бұрын
What if I don't have a section for capabilities? I have the older system (the first system in this video, but the 2nd phone in the video, the one on the left....but starts with configuration when I log in). I followed your instructions....however....I go to General Admin, my options are 1. Sys Speed Dial, 2. Name, 3. Time and Date, 4. Restrictions, 5. Overrides, 6. Permissions, 7. Night Service, 8. Passwords. I have been through every option I can find and I cannot find anything with capabilities? Please help. *pout*
@mounirmohammed307
3 жыл бұрын
Hi i want ton know how to allow/prevent extension from dialing 9 to get access to a external line
@jasoncampbell5299
6 жыл бұрын
I have the same exact system. I loss power and have a door bst. When someone rings the door, all of my sets would ring. Now, when someone rings the door, all sets make a loud noise with a couple of beeps - almost like an alarm. Is there a reason why and how do I fix that?
@velysamatos578
3 жыл бұрын
Hello, how can I page more than one line at the same time, or program it to send pages to some specific lines? Is it possible?
@abelmanriquez701
2 жыл бұрын
I bought a used phone AT&T DECT6.0 , How can I reprogram my number to the phone ?
@StevenPenny
7 жыл бұрын
Thanks for the video, I'm trying to learn some of this for my job. On an unrelated note, do you know why a Nortel phone wouldn't cancel call forwarding? The person is selecting the line, punching 73# and it makes the beeping noise but it sometimes doesn't cancel the call forwarding. They are having to press it a few times.
@zuharedaher1041
5 жыл бұрын
Thanks for making these videos. I would like to know how to move an extension from one phone to another. I have an M7310 system. The issue is I have do not see new voicemail notifications on my extension. I have to walk to my old office to see the notification. I can access all 4 lines, and can access and listen to my VM , I just can't see when I receive a new voicemail. Thank you
@centeremail3397
6 жыл бұрын
Great video! Can you help me figure out how to keep a phone from ringing when a call comes in but still allow it to ring for a page?
@mariehiggins1444
7 жыл бұрын
Hey there I need help with my older norstar. When I press hands free if picks up line 2 not line one. And that's all I need to change. I've watched so many videos I can't seem to find the right one can you help me? Please.
@AntonioLopez-rm3co
4 жыл бұрын
Steve, how can I enable Auto Attendant? It keeps telling me feature is not enabled and I can't seem to navigate to the right stop. HELP PLEASE!
@babiemonkey10
7 жыл бұрын
How do you allow caller id to show on each device. Ring or not ring. Thanks
@paramountdentist8881
7 жыл бұрын
Hi there, how can I set up caller id on nortel T7208 and M7310!! you will save us loads of frustration on people hanging up on us!!! Thank you
@rosemeyer9472
5 жыл бұрын
can you tell me how to program phone from "log" to "Password" when I don't have an "other" option. Trying to change name on phone but when I do feature 981 it will not give me password option. Thank You.
@kkmhdsali
3 жыл бұрын
My line always show 'service on' how to stop? And how caming
@sunlow7410
4 жыл бұрын
Do you do technical support over the phone? If so, would love your contact info.
@KG-kg8mx
5 жыл бұрын
I have Call Display as part of my phone plan but caller information does not show on my Nortel Networks phone(s). My provider said it was something I needed to activate on my end. Any idea how I do this? I have not been able to figure it out.
@thenortelguy
5 жыл бұрын
honestly, setting up CID on your Nortel (assuming it is CID capable - not all are), is a tricky process. So, tricky that I have yet to create a video about it. Sorry. :-(
@peterriddell840
6 жыл бұрын
Hello- Our phones show our called id after the receiver is picked up. Is there a way to change the setting so the caller id shows prior to picking up the phone?
@thenortelguy
6 жыл бұрын
yes, it's in there somewhere. Sorry, CID setup is such a pain, I don't have that information off the top of my head. I *think* you have to name the sets as "Caller ID Set" in the programming.
@jwsharing
6 жыл бұрын
Thank you
@mellelylynda6598
3 жыл бұрын
Gives goods!
@mellelylynda6598
3 жыл бұрын
Works
@anncooper9159
5 жыл бұрын
how do I cancel an external call forwarding
@jonathankeenan80
6 жыл бұрын
When you were talking about the page zone setting that actually assigns that phone you've selected to a certain zone number Of which that zone is being paged It had nothing to do with the paging feature code what so ever
@thenortelguy
6 жыл бұрын
hey, great. Thanks for the feedback. I'm sure it will help others here. :)
@AmbienteyColorTV
4 жыл бұрын
Hi, how may I get the messages recorder if I don’t know the pass? Thanks for your help
@thenortelguy
4 жыл бұрын
It varies. Could be 5-20 minutes of recordings. I do have a video about resetting the voicemail password. Go to my KZitem home page kzitem.info. Then click on VIDEOS. You will see all my videos. 😁
@thenortelguy
4 жыл бұрын
It varies. Could be 5-20 minutes of recordings. I do have a video about resetting the voicemail password. Go to my KZitem home page kzitem.info. Then click on VIDEOS. You will see all my videos. 😁
@jesusmartinez2688
4 жыл бұрын
If I am on vacation, how can I transfer the calls that come to my cell phone?
@thenortelguy
4 жыл бұрын
Jesus, depending on the model of your system, check to see if it has a Line Redirect capability. It's Feature 84. Someone put up a nice article on it here: btbusiness.custhelp.com/app/answers/detail/a_id/16192/~/how-do-i-redirect-or-forward-my-norstar-calls-to-an-external-number%3F/c/5144/
@jwsharing
6 жыл бұрын
Do I use capabilities to change ringtone from another internal set calling me?
@joseestevez7041
6 жыл бұрын
John Wright use I think is feature #84 in the phone!
@soilad1
6 жыл бұрын
Hello, how do I set up caller I’d display? Thank you
@thenortelguy
6 жыл бұрын
Dalios, sorry, but it's pretty complicated. Even I have to wrestle with it a few times to get it right. Good question though.
@Steveos312
7 жыл бұрын
Isn't "software" just "firmware"?
@thenortelguy
7 жыл бұрын
I suppose. Semantics. Nortel always refers to it as S/W. Thanks for the comments :-)
@mellelylynda6598
3 жыл бұрын
World and world
@JoeMama-xp5wt
6 жыл бұрын
Wat was that code again
@thenortelguy
6 жыл бұрын
the usual programming code is Feature (star)(star) 266344. Typically, the password is 266344.
@mellelylynda6598
3 жыл бұрын
Haut débit réseaux des reseaux
@teclishighelf5787
5 жыл бұрын
Nortel was the biggest embarrassment in canadian engineering history since the Quebec bridge. Why do people keep bragging about having worked there?
@mellelylynda6598
3 жыл бұрын
In tv they layen every things! In our religion sunna girls and women she didnot Get parties no fffforce no force even in différents organism and they Shall be respective with in countries.
Пікірлер: 58