Best British woodworker on KZitem IMO hands down! ❤️💪
@BradshawJoinery
2 жыл бұрын
Well i like this comment haha!!! Might even pin it Lol 😂🙌
@kryptykomedy
2 жыл бұрын
@@BradshawJoinery Be my guest 😆❤️💪
@deeaks100
2 жыл бұрын
@@BradshawJoinery it's got to be either you or paul sellers. since he's primarily hand tools, and you're primarily power tools, we could just have two champions.
@SP-ki5gn
Жыл бұрын
It's true, he's brilliant. Another one worth checking out is New Yorkshire Workshop.
@Quaker521
2 жыл бұрын
A lot of work has gone into making this a fabulous corner cabinet. Love the burr detail in the upper part. Really nicely done. Cheers.
@BradshawJoinery
2 жыл бұрын
Thankyou, yes a few hours on this one, especially on the design and planning. Glad its been well recieved!
@normanboyes4983
Жыл бұрын
Absolutely epic craftsmanship, you are truly on top of your game.😀👍
@moldings_etc
2 жыл бұрын
When I was doing high end furniture, it was so hard to explain how much work went into curved stuff. Wish this video was around back then. Love how you made the arched stiles out of solid to match the curve of the rails, That was slick!! Love the video, almost makes me want to go make some more curved stuff, maybe I can get time soon.
@BradshawJoinery
2 жыл бұрын
Cheers for that Dustin. Yeah its an awful lot of work isnt it! Enjoyable job once in a while i think.
@keithwiddows2391
2 жыл бұрын
Stunning. I particularly like the pippy oak pattern being bookmatched at the top of the unit. Most of us makers would have probably gone for center but being at the top is a really nice touch 👍👍👍
@BradshawJoinery
2 жыл бұрын
Cheers keith, Yeah it was a tricky piece as the burr was right at the end of the slab, so couldnt use in the middle. It took ages to find a suitable layout that didnt look odd
@its9429
2 жыл бұрын
Beautiful. I like the 45' inset detail on the face frame.
@BradshawJoinery
2 жыл бұрын
Cheers! Yeah its a lovely feature and one ill be using in the future for sure!
@CreativeCarpentry
2 жыл бұрын
That whole corner looks great top to bottom, hours and hours of work no doubt but well worth it in my opinion . The videos are huge help to anyone looking to do curved cabinets because you break down the job into manageable steps . So good that no cnc used and it all comes together just fine. Thanks for the videos- I always enjoy what you have to show so keep it up 👍
@BradshawJoinery
2 жыл бұрын
Thankyou David! Yes a very time consuming corner with lots of detail! Appreciate the kind words mate, all the best
@jimbartley9125
2 жыл бұрын
Excellent work. I thought you did a great job of the base unit. Nice to see that you thought of alternative ways of working that made the top unit easier to make.
@BradshawJoinery
2 жыл бұрын
Cheers Jim, Yeah definitley improved techniques, but pleased to have accomplished them. It was definitley a challenge, i wasnt 100% sure i could complete!
@scottearlsmithFTC
5 ай бұрын
Unbelievable. So well done. I'm learning lots. Amazing channel.
@baloo021063
2 жыл бұрын
great to see proper time and attention to detail on all your work, way too many companies do the least they can get away with and usually ends up junk, keep the videos coming very enjoyable to watch, takes me back to my young days working for a boss who has the same values as you, cheers Ross 👍👍
@BradshawJoinery
2 жыл бұрын
Thankyou Ross! Yes its a shame to see price taking over from quality, but its the world we live in and seems to go unnoticed in the majority. Unfortunately it takes a very long time to learn to do this stuff and the rewards for all that time are less than other careers where you don't get messy or work every hour god sends haha
@Blade1310
2 жыл бұрын
Woo hoo.........I didn't get lost in this one! All joking aside for the moment Ollie, I think one thing that gets slightly overlooked in the comments section is how many times you tweak and improve on designs/processes and are then willing to pass them on for the benefit of others. I have absollutely no background whatsoever in woodworking (as you can probably tell 🤣) and will never use any of the useful info but I find your videos highly entertaining and satisfying to watch. Your customers must be chuffed to bits with your work! Thanks very much!
@BradshawJoinery
2 жыл бұрын
Haha, Well thats a good thing then! Yes lots of info, but there needs to be a lot of info as to get things right is a build of up lots of little attentive details. I dont get too many complaints. Usually lead times are the worst haha
@johnbolwell5969
2 жыл бұрын
As usual, that is utterly magnificent. What amazes me is that your chosen solutions to various problems always seem to work, and work well! Exhibition standard.
@BradshawJoinery
2 жыл бұрын
Thankyou John! Loving all the great comments! I try not to start a job if i dont know it will work or not. Although this was one of them, ive not done this before so i wasnt sure situations.
@bchdsailor
2 жыл бұрын
You never stop impressing, amazing work - as always
@BradshawJoinery
2 жыл бұрын
Thankyou so much!
@carllamb6711
2 жыл бұрын
Hi Ollie Love how calm you are when making your videos mate, when I’m making things I talk to myself with the odd effing & jeffing lol Iv also noticed you have every tool in your workshop how nice that must be, amazing skill & content mate thanks 👍🪚👍🪚
@BradshawJoinery
2 жыл бұрын
Haha Cheers Carl. it gets frustrating at times, but i'm pretty chill on the whole but dont believe there arent any effing and jeffins haha! Ive got a fair chunk of kit but there are certainly toold id very much like (definitely need) that i cannot fit in, like everybody i guess. Thankyou buddy!
@gailcrisp2750
2 жыл бұрын
Your work is simply excellent! Love watching your videos. 1st class.
@BradshawJoinery
2 жыл бұрын
Thankyou Gail!
@Hatchmade
2 жыл бұрын
Hand plane sounds are the best.
@BradshawJoinery
2 жыл бұрын
Absolutely!!
@ullmannone
2 жыл бұрын
One is left with the impression that this had to have been created by a sculptor rather than an expert artisan cabinetmaker such as yourself. Your workmanship in every regard is peerless. Did you follow a set of mathematical or simple arithmetic rules in computing the measurements? Or, did you simply create a bespoke mold 'on the fly' to shape the elements in situ within the space? For the purposes of historical restoration, you might want to alert the Royal Household! Thank you for posting these videos. In themselves, they are notable for the illustration of the process as well as for the mysteries that guide you. Your precision is just unbelievable!
@BradshawJoinery
2 жыл бұрын
Haha thankyou very much John! Such Kind words. The under cabinet height is determined from tried and tested measurments then tweaked to the customers desire, then it was quite difficult to make the tall ceilings work! It is all drawn on Sketchup, to every last detail to make sure it looks right before starting. Its a lot quicker to do it on there than in real life haha! Haha by royal appointment would be nice!!! I dont really know what to say in reply to your kind words, but want you to know that they are well received and go a long way to making the effort of filming and editing worthwhile!
@jimp514
2 жыл бұрын
Love the oak veneer
@BradshawJoinery
2 жыл бұрын
Cheers Jim, Its a lovely piece!
@rodsheridan7048
Жыл бұрын
Very nice work, thanks for making the video. The lighting adds very nicely to the cabiet
@BradshawJoinery
Жыл бұрын
Thanks Rod, yeah it really makes a huge difference.
@antonoat
2 жыл бұрын
Great vision and perfect execution, fabulous work as always from you👏😀👍
@BradshawJoinery
2 жыл бұрын
Thankyou very much!! 🙌
@davelethaby1279
2 жыл бұрын
An absolutely stunning piece of work, Ollie ... you must be quite chuffed and rightly so. Cheers!
@BradshawJoinery
2 жыл бұрын
Cheers Dave! Yeah i am really really Pleased! Its a pleasure to walk past and admire, almost shocking the then think, i made that! Cheers mate
@johnkillen588
10 ай бұрын
amazing skills.....and persistence.
@paultay23
2 жыл бұрын
I should know better...can't believe your attention to detail Ollie... 👏👏
@BradshawJoinery
2 жыл бұрын
Thankyou Paul! One day you'll comment "thats a bit rough" its all in the edit! hah
@DovetailTimberworks
2 жыл бұрын
Very nice, clean work. It's really nice to hear about the changes you've made since the last ones.
@BradshawJoinery
2 жыл бұрын
Hey matey, Hope your well, Yeah definitley changes worth noting for anyone following or attempting!
@craigwilliams6734
2 жыл бұрын
OMG!!! That noise just sounded exactly like the TARDIS de-materialising - unbelievable
@BradshawJoinery
2 жыл бұрын
Which part? haha
@craigwilliams6734
2 жыл бұрын
@@BradshawJoinery The bit where you said you liked that sound!!! You are probably a bit too young to remember it!! 😜
@jerrymoffat3966
Жыл бұрын
It takes me back to my joinery days. I had similar machines, other then a bag press. Making anything curved is time consuming. You need a special customer to pay for that. We made a few nice bits for the Swiss Bank, even they raised their eyebrows sometimes. Bottom line we never got rich on the back of them. All the same a very nice job.
@BradshawJoinery
Жыл бұрын
Nice one Jerry, yes the client has to understand the process involved. I dont understand how premade curved units are so cheap!.
@jerrymoffat3966
Жыл бұрын
@@BradshawJoinery No. You do some lovely work. I have just found your channel and look forward to viewing its content. Thank you.
@BradshawJoinery
Жыл бұрын
@@jerrymoffat3966 Thankyou! Im not the best videographer but hopefully you find the content improving!
@jerrymoffat3966
Жыл бұрын
@@BradshawJoinery I’m sure I will. 👍
@paulgarner6517
10 ай бұрын
Stunning
@Robe999
2 жыл бұрын
That’s what we call Hollywood 🙏
@BradshawJoinery
2 жыл бұрын
Cheers Rob!! haha i don't think Hollywood quality, but atleast this isnt fake
@mauserkk98
2 жыл бұрын
Brilliant, the evolution bottom to top cupboard isn't lost on me .
@BradshawJoinery
2 жыл бұрын
Nice One Nicholas! thankyou
@brucepottorff6870
2 жыл бұрын
Well done indeed.
@BradshawJoinery
2 жыл бұрын
Cheers Bruce
@sharondymond
2 жыл бұрын
Stunning!
@BradshawJoinery
2 жыл бұрын
Thakyou Sharon
@royordway9157
2 жыл бұрын
Very nice job.
@BradshawJoinery
2 жыл бұрын
Thankyou Roy
@muff441
2 жыл бұрын
mate well done that is truely awsome piece and great video
@BradshawJoinery
Жыл бұрын
Thankyou very much!
@KLIDIMARIA
2 жыл бұрын
As everything made by your hands,amazing !!!
@BradshawJoinery
2 жыл бұрын
Thankyou Ianis!!
@gavjav1
2 жыл бұрын
Love the finished cabinet and fantastic to watch your process. Regarding the vacuum bag, can you use any kind of glue or is there a recommended glue to use?
@BradshawJoinery
2 жыл бұрын
🍻 Cheers Gavin. Pretty much any glue yeah. Depends on application. some want really rigid glue for laminations, others waterproof, quick setting using heat..... Ive used, PVA, PU and UF resin so far.
@charlestyndall1919
2 жыл бұрын
Brilliant
@BradshawJoinery
2 жыл бұрын
Thankyou Charles
@silverfox8801
2 жыл бұрын
Mad skills!
@BradshawJoinery
2 жыл бұрын
Thankyou Silver Fox! :)
@mrnormski9005
2 жыл бұрын
I just love these videos, I watch them a half a dozen times just to take things in wishing I could do that, but must admit to falling asleep a couple of times (it's an age thing). Is it just me but I enjoy hand sanding lol 😆.
@BradshawJoinery
2 жыл бұрын
Thankyou Normski! Im sure if you have the desire, you would be able to do the same! I fall asleep watching the edits too!! haha But i usually am trying to do it when i should be in bed, so not sure if its the content or nature. I dont mind a bit of hand sanding, But sanding windows or longer than 10 minutes sucks
@raydriver7300
2 жыл бұрын
Absolutely brilliant Oliver. I’d accept 1/4mm of sanding any day 🌞
@BradshawJoinery
2 жыл бұрын
Haha cheers Ray!
@peterleishman431
2 жыл бұрын
Class genius 👍🏴
@BradshawJoinery
2 жыл бұрын
Cheers again Peter! :)
@brianhescott
2 жыл бұрын
What a butifull peice of work.
@BradshawJoinery
2 жыл бұрын
Thankyou Brian! Very Kind
@sicpac66t
2 жыл бұрын
Outstanding work. Absolutely blinding.
@BradshawJoinery
2 жыл бұрын
Cheers mate!!! Appreciate it. But i don't thing the lights were bright enough to bling you. 😂
@zzota
2 жыл бұрын
I love the magnets on the cornice; cool idea.
@BradshawJoinery
2 жыл бұрын
Cheers! yeah worked a treat.
@dressmakersdummy54
2 жыл бұрын
That incredible work is slightly spoiled with the white plastic sockets. Amazing work .
@BradshawJoinery
2 жыл бұрын
Thanks Matey, The sockets arent staying, they will be swapped for finish faceplates when the room is ready to be moved into.
@cliveclapham6451
2 жыл бұрын
Very curvy 🎯
@BradshawJoinery
2 жыл бұрын
Oh Aye! Lovely to handle
@cliveclapham6451
2 жыл бұрын
@@BradshawJoinery you beat lovely handling curves 😎
@steveg4iwr
2 жыл бұрын
A beautiful cabinet
@BradshawJoinery
2 жыл бұрын
Thankyou Steve
@paulfriedman4767
2 жыл бұрын
Beautiful work
@BradshawJoinery
2 жыл бұрын
Nice one Paul,
@houtslager
2 жыл бұрын
Another stunning piece of furniture, well done 👍👍👍 Karl
@BradshawJoinery
2 жыл бұрын
Thankyou Karl! 🙌
@houtslager
2 жыл бұрын
@@BradshawJoinery out of curiosity, where did you get the vacuum bag from and what size are you using ? Karl
@BradshawJoinery
2 жыл бұрын
I bought from Airpress and it's the one big enough for 8x4 sheets
@houtslager
2 жыл бұрын
@@BradshawJoinery cheers for that , just ordered a polyurethane bag from them.👍👍👍
@markmills7640
2 жыл бұрын
Really nice mate thanks for vidio
@BradshawJoinery
2 жыл бұрын
Thanks Mark, :)
@colingraham1065
2 жыл бұрын
Quality!
@BradshawJoinery
2 жыл бұрын
Thankyou Graham
@hilbilchillbil
2 жыл бұрын
Very smart with lots of cool features 👌
@BradshawJoinery
2 жыл бұрын
Cheers Paul!!!
@blueeyes708
2 жыл бұрын
Next level mate, a real credit to you
@BradshawJoinery
2 жыл бұрын
Cheers Liam! Much appreciated matey
@JPGuay
2 жыл бұрын
Outstanding !
@BradshawJoinery
2 жыл бұрын
Thankyou!!
@swt198597
2 жыл бұрын
Nice Job. Very well done.
@BradshawJoinery
2 жыл бұрын
Cheers Buddy
@michaelplays2449
2 жыл бұрын
Beautiful work !! a great video......thank you
@BradshawJoinery
2 жыл бұрын
Nice one Michael!
@soltesznagytamas
3 ай бұрын
👏👏👏👍❤️ full pro!
@vanzipper6486
Жыл бұрын
👌
@christinagracewhite
Жыл бұрын
Asking in the interest of my brother, how do you get to the point where you can afford the equipment in your workshop? Your set up looks like woodworking heaven
@BradshawJoinery
Жыл бұрын
I try to keep the funds available when i need/want a new machine and keep a keen eye for a bargain. The biggest cost would be the space to put them in so ideally, want to have it productive from day 1, not an easy thing to achieve!
@christinagracewhite
Жыл бұрын
@@BradshawJoinery I see. So hand tools and power tools till you have the client base for constant flow of work. Makes sense. I’d love to see him in a set up like yours one day. Attention to detail like yours and his is a dying trade.
@BradshawJoinery
Жыл бұрын
It seems to be well appreciated, I think the results of modern practices/shortcuts are starting to show throught and gain awareness so there is most certainly a good client base for people with the knowledge and attention to detail. Most people start in their garage/workshop/shed with smaller machines and if it starts to work then expand. 🙂
@bpt006
2 жыл бұрын
Wow Ollie ... that’s proper skill. Well done! What blade do you run in your bandsaw.
@BradshawJoinery
2 жыл бұрын
Cheers for that! I get them from Tuffsaws, M42 Bimetal. Give him a ring, top bloke and company.
@DN.woodworx
Жыл бұрын
Amazing work! I am curious how much time you spend on the cabinet if you like to share this detail ? :)
@BradshawJoinery
Жыл бұрын
Hi Dimo, I can't remember but about 4 weeks for the 2 cabinets I think, but I was a bit steady with filming etc
@yellowzt
2 жыл бұрын
Great to see a craftsman, designer & problem solver at work! Do you have a link to the sensor you used? My daughter would like an automatic light in her cupboard & I haven't found a suitable sensor yet.
@BradshawJoinery
2 жыл бұрын
Cheers Philip! amzn.to/3POAuf8 are the ones in the video, they do double door sensors etc too, but only ever used the pir ones
@philipwilliams8114
2 жыл бұрын
Hi Oliver, great vid as ever. Please may I ask where you source your electrical components and what brand they are. Thank you
@BradshawJoinery
2 жыл бұрын
Cheers Philip. I use a mix of parts, but got these from Landmark electrical. Eco pac drivers, leyton pir, and 4.8w 2v led strip. Thing the track is about 14mm wide overall
@tutekohe1361
2 жыл бұрын
Beautiful job on the cabinet. As a professional Sheep Shearer, please can we see your sheep?
@BradshawJoinery
2 жыл бұрын
Cheers buddy! I will get a clip sometime haha!
@bobminchin
2 жыл бұрын
Great work and attention to detail. Do you have a link to the led strips please. I've been using the flexi ones but your rigid ones look a lot better. Thanks Bob
@BradshawJoinery
2 жыл бұрын
Cheers Bob, I used a 12mm X 7mm mini profile with a 12v 10mm led tape 👍 You buy them separately along with a driver and solder together
@bobminchin
2 жыл бұрын
@@BradshawJoinery Thanks for the reply. thats the way for me to go next time.
@BradshawJoinery
2 жыл бұрын
Yeah it works well, get the opal diffuser not clear It might be 8mm tape, I can't remember actually, so don't swear at me if 10mm doesn't fit 😂🤣
@bobminchin
2 жыл бұрын
@@BradshawJoinery no worries mate!
@ryanmurawa955
2 жыл бұрын
Brilliant work as ever. Such a pleasure watching the kitchen come together. Would you share what blade you used to resaw the oak for the panels? It gave such a good finish. Thank you.
@BradshawJoinery
2 жыл бұрын
Hi Ryan, it's an m42 Bimetal from Tuff Saws. Great company and price, give them a call to discuss your requirements!
@ryanmurawa955
2 жыл бұрын
@@BradshawJoinery That's brilliant. Thank you. I'll give them a call. Cheers.
@darenwingfield6966
2 жыл бұрын
very nice work could i ask what paint you use is it a coloured laquer water based or solvent.
@BradshawJoinery
2 жыл бұрын
Cheers, I use a shewin Wiliams Waterbourne Enamel.
@ixurlife8062
2 жыл бұрын
Ma man I've no forgot about you promise class work as always major love n respect fse Scotland I pick you up in private chat very soon promise family stuff is all 😉
@BradshawJoinery
2 жыл бұрын
No worries matey, im super staked for time anyways! Stay say
@modernpsalmist
2 жыл бұрын
Who designed this cabinet?
@BradshawJoinery
2 жыл бұрын
I did, there were several variations, it was tricky to make it work with the ceiling height, but think its about right.
@rickc2078
2 жыл бұрын
My kitchens cabinets are more Trabant than Rolls Royce.
@BradshawJoinery
2 жыл бұрын
Haha Rick! A family friend was a Very big Trabant fan, Had loads of them/involved in the owners club, He was always extolling the virtues of the legendary trabant
Пікірлер: 151