This actually is giving me more confidence to tackle my floor pans. I’m going to practice my welding a little first though.
@Autofaze
4 жыл бұрын
Defiantly do that! I wish I would have done some warm up practicing before starting on the welding portion of the floors!
@normhowes2975
4 жыл бұрын
Looks great. I was hoping for more of the attention to detail (fitment) that goes into getting the pans into place. Just started getting parts and pieces for my F150 cab/floorpans delivered.
@Autofaze
4 жыл бұрын
Thanks for watching Norm! The fitment process ranged from 4 to 6 different times of trimming to get the exact fit we were after. It is buy far the most tedious of the process!
@slowshedgarage7409
3 жыл бұрын
Nice work. I'm trying to finish up my floor pans in my 1968 Impala. Thanks for sharing and new subscriber.
@Autofaze
3 жыл бұрын
Thanks for the sub! Good luck on your project!
@edzielke4272
3 жыл бұрын
Nice work guy's
@Autofaze
3 жыл бұрын
Thanks for watching Ed!
@MoGumboFukUTubeForChngngMyName
Жыл бұрын
1:05 man, that floor pan you cut out would last me another twenty years. I put my foot in the back floorboard of my 1965 Barracuda to reach over and get something from the back of the car…. foot went right through and was standing on the driveway.
@Autofaze
Жыл бұрын
oh man! that is wild!
@JohnDoe-zh9mv
3 жыл бұрын
I like your channel. Keep up the good work
@Autofaze
3 жыл бұрын
Thanks John, that means so much to us! Appreciate you watching
@dougewing9636
4 жыл бұрын
Really good job
@Autofaze
4 жыл бұрын
Thank you Doug! I appreciate you watching.
@BillyFargon
4 жыл бұрын
Nice! I have to do the same thing eventually :/
@Autofaze
4 жыл бұрын
Oh man! I am sorry to hear this Billy!
@PMcGuffin
4 жыл бұрын
I was just going to say the same thing. I have had my floor pans sitting on my shelf for a year now >_
@ggordon4127
3 жыл бұрын
Nice job.
@Autofaze
3 жыл бұрын
Thanks for the visit Gordon! Appreciate the kind words
@brianstalter6569
4 жыл бұрын
The floor patches look good!
@Autofaze
4 жыл бұрын
Thanks Brian! It's all starting to come together now!
@brianstalter6569
4 жыл бұрын
@@Autofaze Car is gonna be pretty sick by the time you guys get the swap done.
@Autofaze
4 жыл бұрын
@@brianstalter6569 I can't wait! It feels like it's been forever since I've driven it!
@Kato1559
4 жыл бұрын
We want more nova videos!!!!!
@Autofaze
4 жыл бұрын
Got a couple in the works!! Thanks for watching Kenny, I'm ready to get it on the road!
@thomasshamp6031
3 жыл бұрын
Im going to be replacing the floor pans in my 70 nova, and I am going to be teaching myself how to weld soon. What brand / style of welder did you guys use?
@Autofaze
3 жыл бұрын
Hey Thomas! I appreciate you watching. I did the same thing. I run a Miller 141 and Tyler ran a Miller 211 in this video.
@209chevymon
4 жыл бұрын
nice man i know you said you were new at this but i still wouldve liked to see your side and hear your thoughts on where you couldve done better or tried something different but good video
@Autofaze
4 жыл бұрын
Thank you for watching! With Tyler coming out to help this Nova was in good hands. I wish I would have spent 30 minutes practicing on my scrap metal before starting on the driver side welding.
@dogfilms7753
2 жыл бұрын
What should this cost to repair? I'm going to take mine into the body shop
@Autofaze
2 жыл бұрын
what quotes did you get?
@pl5624
3 жыл бұрын
Malco shears are great
@Autofaze
2 жыл бұрын
agreed, so satisfying
@hueroski
3 жыл бұрын
good job
@Autofaze
3 жыл бұрын
Thanks for watching!
@thisguy2720
2 жыл бұрын
What did you do to finish under the car, just paint? Or do you seam seal the welds on the bottom too?
@Autofaze
2 жыл бұрын
I believe i talk about that in this video kzitem.info/news/bejne/1G2VqoCahGainX4
@tommyboy4124
3 жыл бұрын
I wish you guys lived by me so i could have some help do mine.
@reacew7624
2 жыл бұрын
embrace your welds man the only people who will talk shit are the ones who cant weld lol
@Autofaze
2 жыл бұрын
That's real talk! Got to start somewhere ♥️, it will hold 🤣
@roymtz5375
Жыл бұрын
You guys do some good work. Where are you all from?
@Autofaze
Жыл бұрын
Kansas city! thanks for checking us out!
@tonychristiano
2 жыл бұрын
OverKill . but if your racing it i understand
@Autofaze
2 жыл бұрын
agreed! We were there so why not. Car will never see weather again so these should be the last floors it gets in this lifetime.
@eriktinaj8741
3 жыл бұрын
What gauge metal were the floor pans?
@Autofaze
2 жыл бұрын
I do not remember. Measured to set the welder up but bought a patch panel for each side.
@Chriscarnes1619
2 жыл бұрын
Can yal come do a 66 Super Sport Impala for me
@Crazy_Alex_7667
2 жыл бұрын
How much do you think it would cost to cut and patch/ install new floor panels on a mk3 gti
@Autofaze
2 жыл бұрын
depends on the region and the amount of labor hours. If you do it yourself with welder and materials I would say $750-1500.
@brianpacheco4350
Жыл бұрын
What about the bottom side?
@Autofaze
Жыл бұрын
What do you mean Brian?
@brianpacheco4350
Жыл бұрын
@@Autofaze yeah like underneath the car?
@nathandeleeuw281
3 жыл бұрын
do you have to take out the engine to do the floorpan?
@Autofaze
3 жыл бұрын
No you do not. I just happen to be doing a ls swap that has taken longer than I care to admit lol!
@MoGumboFukUTubeForChngngMyName
Жыл бұрын
@@Autofaze but it is recommended to drain your windshield washer fluid first.
@trinsonwhite977
4 жыл бұрын
What type of welder was used for the floor pans
@Autofaze
4 жыл бұрын
Miller 141 driverside & Miller 211 passenger side
@darcy32171
4 жыл бұрын
@@Autofaze fluxcore or using gas?
@he-got-a-new-mommy
3 жыл бұрын
Lock in the surface rust....lol
@Autofaze
3 жыл бұрын
we address that in a different video, thanks for watching!
Пікірлер: 63