Awesome review. The large LCD screen is powered by a powerful and homogeneous COB light source. Unlike a matrix light source, the power-hitting of the resin is much more uniform. This leads to better printing results. I also like whale3e and use it well.
@wangdennys
Жыл бұрын
thank you for the insight
@celsotardeli9623
Жыл бұрын
First of all thanks for all the amazing reviews and detailed videos. If possible, could you please consider making a video with tips to print flat surfaces or geometric accurate objects? Unfortunately it is really hard to find good information related to this topic since most of the youtubers focus on miniatures where precision is not exactly needed.
@wangdennys
Жыл бұрын
I will slowly get there. There are several more steps i need to make tutorial first before get into accurate geometric.
@planckstudios
Жыл бұрын
That's a tough one! fruh-NELL. I'll take those giggles over correct pronunciation any day lol. Beautiful prints
@wangdennys
Жыл бұрын
"Legend says, he still struggle so say it without giggle to this day"
@tryharso2387
Жыл бұрын
Love the turntable!
@wangdennys
Жыл бұрын
I stole it from my wife. LOL
@artofscorpia9981
Жыл бұрын
love all the indepth reviews man
@wangdennys
Жыл бұрын
Thank you
@retromodernart4426
Жыл бұрын
Great, thorough review! The printer feet are adjustable by the way, all you have to do is screw or unscrew them so you can level the printer so the resin is even. I see yours has the plastic FEP frame... The Nova3D Whale3 SE is one of the best printers available, for sure. That steadiness is top-notch for all kinds of prints. Nova3D came out with the Whale3 Super (flip top) and Whale3 Ultra (Flip-top, filtration and heater), maybe you can review those, too! 😉
@wangdennys
Жыл бұрын
So i can force the rubber to loosen so it is adjustable?
@retromodernart4426
Жыл бұрын
@@wangdennys On mine, all you do is turn the rubber as if you were unscrewing a screw, it has a threaded metal post, yes.
@wangdennys
Жыл бұрын
@@retromodernart4426 mine is super hard to turn i though it is not adjustable LOL Okay gotta update the info in video description
@retromodernart4426
Жыл бұрын
@@wangdennys If I recall correctly, it was really hard to turn then it released, like maybe they used Loctite or something.
@wangdennys
Жыл бұрын
@@retromodernart4426 maybe, just maybe. It wasnt meant to be adjustable feet. But since it is threaded, we can use it for adjustable feet. Lol
@timurim3143
9 ай бұрын
you have some of the best 3D printer reviews, I watched almost all of your videos in one day when you review the new Nova 3D printer, 14k?
@wangdennys
9 ай бұрын
Almost finish testing. I ran into some issues. Probably due to the fact it is a test unit.
@mrc8308
Жыл бұрын
Thanks Dennys!
@everymans40k
Жыл бұрын
Another great video Mr Dennys. Even though i dont own this printer just watching how you work through things and explain things helps me to pick up more knowledge for my own Printer!!! Mini 8KS. It is working great. Set it to 1.3 Exposure as we discussed. I have one request if i could ask a favor. Can you do a good video on how to Maintain and service a printer to keep it running in tip top shape? I think it would be helpfull to all your subscribers and even to me since I am a new printer owner. For example, when do you grease or lube the Z axis rail? How often and how many hours of use should you then grease it? Where do you put the lubrication...exactly what spots. When do you apply oil or grease to the motor "spindle" or "worm gear" of the Z axis? Same thing...how many hours and where do you drop the oil/grease? What type of oil and grease? How can we tell if our Motors to our machines are running good or if they are getting weaker or worn out? Stuff like this. I dont think anyone doing KZitem has put together a good "How to Maintain your Printer" video. Thank you sir for your consideration Everyman
@wangdennys
Жыл бұрын
I will
@thedorklylionchannel415
Жыл бұрын
Nice! This one would have passed me by.
@wangdennys
Жыл бұрын
A good alternative
@Redbox013
12 күн бұрын
I own this printer since 7 months and it's great. Almost zero failed prints, great detail and almost no service or leveling. Too bad it is now discontinued! Anybody knows any other printer with 10,3" screen??
@Redbox013
7 ай бұрын
Great review! What is your opinion about water washable Vs. standard resin? Do you feeling that washable is less strong and less detailed or it is a good alternative?
@MrNBridger
Жыл бұрын
Excellent Review
@seenmakino
Жыл бұрын
Very interesting to see the Fresnel lens. Dimensional accuracy looks good! How does accuracy compare to GKTwo?
@wangdennys
Жыл бұрын
Sorry i havent got a chance to get gktwo.
@Emtbtoday
Жыл бұрын
Try an heat the screen woth hairdryer so adhesive gets more tack to it when messaging your woman lol I just took delivery of a Saturn 2 last night over night direct from elegoo I was very impressed as not ment to arrive till Tuesday! I over the size toy anycubic mono 4k and mono 2 hey can fit inside it lol but will get your test prints through it today! I was looking at this one you are reviewing it just looked so cheap n nasty!
@seenmakino
Жыл бұрын
Have you used Nova3d slicer? It is interesting to see the supports. They market tiny delicate supports from their slicer, does it generate optimized supports that are easily removable?
@wangdennys
Жыл бұрын
Tried it. Still take some getting used to
@preddes6522
Жыл бұрын
Are you doing a saturn 3 ultra review?
@OIEI90
Жыл бұрын
Is it possible to share STL files that include joystick support?😊
@이연-x5x
4 ай бұрын
Did you removed the Fresnel Lens when you advanced those printing? why?
@wangdennys
4 ай бұрын
No I am just checking
@이연-x5x
4 ай бұрын
@@wangdennys Ah...You didn't removed that lens....
@wangdennys
4 ай бұрын
Yes i dont remove it.
@이연-x5x
4 ай бұрын
@@wangdennys Thanks a lot!
@Emtbtoday
Жыл бұрын
Looks alright but it's not a cheap printer even though the parts and build is!.
@retromodernart4426
Жыл бұрын
Nothing is plastic except the lid and the plate screwcap...
@paulocezarxavier8552
Жыл бұрын
I have a question, maybe it's a taboo, does using antialiasing make the piece lose definition? If not, what is the best antialiasing and bluer image setting?
@wangdennys
Жыл бұрын
Check all my previous printer review. You can see the comparison for AA off and on. But in short, imo. No, they dont.
@sergeysolonko2441
Жыл бұрын
how call staf what you put on botl
@wangdennys
Жыл бұрын
Sorry i dont get it.
@sergeysolonko2441
Жыл бұрын
sorry, what kind of device did you put on the bottle
@retromodernart4426
Жыл бұрын
@@sergeysolonko2441 It comes with the printer, it's an automatic valve that keeps the resin tank filled without it being overfilled.
@wangdennys
Жыл бұрын
@@sergeysolonko2441 it is the cap comes with the printer. For the auto refil
@ChrisJoseph
Жыл бұрын
You were losing about four hundredths of a mm on that dial gauge with every step, and you called that good?
@wangdennys
Жыл бұрын
It returns to 0 and that is good for me. Proven by the print result all parts connection match very well.
@retromodernart4426
Жыл бұрын
Looks like you don't understand what was being measured here, or how a resin printer is supposed to work - if you can understand that 0.04mm is exactly four-hundredths of a mm, and that the layer height on this printer is 0.05mm by default, maybe you can figure out that simple and precise movement step accuracy that's extremely obvious in finished detail prints, objectively and relative to other consumer 3D resin printers... Maybe your eye was off by about a hundredth of a millimeter...
@AustinLindstrom
Жыл бұрын
Oh my God, what happened to your right thumb nail? Won't that snag on everything?
@wangdennys
Жыл бұрын
Hahahaha my pregnant cat thought my thumb is a snack. Yes, and i have to be carefull, else it will get rip
Пікірлер: 56