Why would they cut the fan's performance in half by putting a nylon dustfilter on top of them ? Makes no sense. Why did they put those filters on the exhaust side ?? Just replace them with metal fan grills ,that won't effect the airflow at all , yet providing protection againts fingers/pets whatever.
@HouseFresh
21 күн бұрын
Yes I realised that those dust filters reduced performance and that the metal fan grills are much better choice. Check out my full review as I mention this 😀
@darknessblades
6 күн бұрын
Currently checking them out, Only have 2 issues with the site 1 they do not accept paypal/alternative methods. [especially for us europeans as creditcards are not widely used] 2 the exact warehouse used is not clearly listed, for all I know, if I order it could ship from a USA warehouse, which would add import fees to it for us in the EU. What I would do is add a zigbee 12V switch to it. [you can get a cheap one with 4 switches for about 10-15$] then add it to homeassistant, combined with a PPM sensor. to have it turn on if the PPM is above a certain limit. This way you don't run it 24/7
@HouseFresh
6 күн бұрын
I do know that Nukit had problems with people complaining and succesfully getting the company kicked off Shopify so the current payment processor is the plan B vs what they had before. All the devices from the international URL: cybernightmarket.com/products/the-nukit-tempest-pc-fan-air-purifier-kit-international will come from Europe but agree it could be a little clearer. Using zigbee switches with home assistant and a PPM sensor will be a major upgrade and another benefit of these devices over your standard HEPA retail air purifier that force you to use their app for any smart features.
@YMICrazy502
28 күн бұрын
It's a hard choice between this and the xl luggable. This one is superior in terms of build. Aesthetically it is way better. But the XL uses 20x25 filters which is superior for filtering plus it uses 7 fans instead of 6. xl luggable uses 3m filters but they are 1 inch only so they will not last as long. Nukit tempest uses 2 inches thick 20x20 filter which is what I want but they arent 3m filters (they dont make 2 inch thick merv 13 20 x 20 filters) and thus won't be as good. Other brand filters and 3m are about the same price as well. I will probably still get this one simply because it looks better and my room isn't that big. The luggable xl is also notably bigger.
@HouseFresh
28 күн бұрын
Be aware that the XL luggable is the largest of the set so you might want to check out the version with 5 fans as it's a little smaller. But durability is much better with the Nukit Tempest, just be aware that they no long sell to USA.
@Reginaldo-1
25 күн бұрын
You're right on the money with all of these points. Lack of 3M filters is a big deal, but I may go with this because it looks better and isn't flimsy like the XL
@trevinsacca
24 күн бұрын
@@HouseFresh oh no they aren't selling to the USA? I was also just looking to buy this or the XXL luggable... looks like I know which I'll be getting now.
@HouseFresh
22 күн бұрын
@@trevinsacca Yeah sorry there was some issues that effected them from the community on X so they had to make the hard decision to no longer sell to the USA.
@beanjamman
4 ай бұрын
It looks like it ended up taller on the power side - is that an optical illusion from the wonky pleats in the filter, or is something not slotted all the way in, or...?
@HouseFresh
4 ай бұрын
Might be the camera angel or the wonky pleats - both sides were the same height at the end. Will make sure to show more of the unit in the review - I'm busy working on it today. Thanks for the comment!
@missgyder
Ай бұрын
Thanks, I am putting one together for my husband's classroom and this is super useful!
@HouseFresh
Ай бұрын
Glad it was helpful!
@you_just_lost_the_game
2 ай бұрын
Hey, I really like 3M filters but could not find one for 20x20x2 with MERV 13 ratings. Is there going to be a version that's compatible with a 3M filter size?
@HouseFresh
2 ай бұрын
Agree I really like the 3m but there doesn't seem to be a 2 inch version. I will speak with the team at Nukit and see if there are plans to have a version that can use 3M filters.
@PETRAKOV1
Ай бұрын
Why there is 6 fans? Why not 9? More 3 from back site will help for more airflow.
@HouseFresh
Ай бұрын
I'm not sure on the decision why Nukit decided to go with 6, but I assume it's just to keep the size not much bigger than a standard PC case. Cleanairkits makes its own PC fan kits, and you can choose from 5, 7, 9 or 10 fans, depending on your needs. I tested the Clean Air Kits XL that uses 7 fans and it was quicker at cleaning our test room but also is quite a bit larger and a little more difficult to move around due to the shape.
@crowaust
4 ай бұрын
It'll be more expensive, but if you don't want to be replacing your fans as often you may want to swap out the fans for something with Mag-Lev Bearing types, they also tend to be quieter too.
@HouseFresh
4 ай бұрын
We have been discussing this internally, thanks for sharing the bearing type. We will look at potential improvements we can make.
@DannyAshtonneomam
4 ай бұрын
@@HouseFresh Also let me know a specific brands of fan if you know one that you would like to see used in the next version we make.
@fungalgrowth
4 ай бұрын
@@HouseFresh Noctua's "industrial" line of fans is another candidate.
@HouseFresh
4 ай бұрын
@@fungalgrowththank you!
@GBR9794
4 ай бұрын
@@HouseFresh Another option would be using more Noctua high static pressure CPU fans to save more power or if you want to use more filter medium.
@Mad_Catter_
11 күн бұрын
Thanks for the info, I have designed my own unit for my specific needs and this was the inspirational video that sparked the concept!
@Mad_Catter_
11 күн бұрын
I actually used several of your findings and studied your equipment makeup.
@HouseFresh
11 күн бұрын
Glad it inspired you, if you don’t mind be sure to share your creation with me. Can be email if you don’t want to do public.
@Mojo_DK
2 ай бұрын
Would you be interested in trying the P14 Max?
@HouseFresh
2 ай бұрын
Yes got a plan to test a number of different fan and filter combos and share the results!
@Mojo_DK
2 ай бұрын
@@HouseFresh Awesome!
@Bete-Bete-Bete
2 ай бұрын
Aren’t the fans supposed to be blowing OUTWARDS? That’s what it says on Nukit’s website. They are blowing inwards in the video.
@HouseFresh
2 ай бұрын
Sorry for confusion the fans were pushing outwards and pulling in from the filter sides. More detail on my build here: kzitem.info/news/bejne/p6NqmXlrq4FqhaQ
@Bete-Bete-Bete
2 ай бұрын
@@HouseFreshMy bad, I just realized that the PC fans don’t work like a house fan and blow air from the opposite direction of the fan face where the logo is. Now I see that your fans are blowing outwards as installed.
@HouseFresh
2 ай бұрын
@@Bete-Bete-Bete No worries, I was worried I would get this wrong so tested it a few times to make sure I didn't do it!
Пікірлер: 37