Thank you brother! I'm a dj and Brazilian. Today my crossfader just stopped cutting and we have little support here in our country. It helped a lot!!!!
@tonespliff
6 ай бұрын
God bless your heart for this tutorial. Crossfader started acting up, and this fixed it. Only problem now, is the tightness of the curve. I guess this is where the patience comes into play 😂
@LaBurbujaDelMantys
Ай бұрын
Gracias bro, estaba muy preocupado ya que el crossfader no cortaba ningun canal.
@jean-christelzanouvi3459
Жыл бұрын
Thanks, you saved my mixer
@TheBrunohs7
2 жыл бұрын
hey, man! this video saved my life! Thank You so much!
@undergroundresistance732
Жыл бұрын
The min used in Numark Scratch is the older non adjustable minis with not the best cut in. Numark could have used the newer ones but they were saving money.
@johnniemoore4771
2 жыл бұрын
It work thx you
@akumasiouxpreme
2 жыл бұрын
the right fade wont work, it doesnt cut out, just keeps playing the left, but when i hit the x fader on it works perfectly on the opposite side, I've done the calibration over and over, is this a hardware problem or am I doing something wrong? I'm lefty and I'm tired of using my Numark Scratch upside down, any tips would be helpful
@ozgunsen4354
Жыл бұрын
Hello there thank you for the video. I've tryed that calibration but the fader is not sharp enough. All the way left and 1.5 mm gap occured. Do you suggest anything for the sharper callibration thank you!
@bombedranolimoilou
Жыл бұрын
A GOOD OLD PIECE OF PLASTIC LIKE OLD VESTAX MIXERS :D
@ozgunsen4354
Жыл бұрын
@@bombedranolimoilou ((:::
@user-yc6rp6cu6f
11 ай бұрын
I’ve had this issue today but this has made it worse, now the fader is completely open on both sides 0 cut off
@djbaraodj7233
4 ай бұрын
to gostei desse tutorial não vi ninguem fazer ainda em português
@tnavassutriv7892
6 ай бұрын
will this works on Numark m4 mixers? there is no front panel to remove on M4
@jarrodgibbs715
2 жыл бұрын
Thanks for the video. Can I calibrate the fader to create a little more dead space than 1-2mm for my scratch preference?
@Gerry.1120
2 жыл бұрын
Nice.
@OlliHurme
2 жыл бұрын
I love you
@gotlumpz4upaintball447
2 жыл бұрын
Great video. Do you know the name of the 4 linked wires that go from the circuit board to the bottom of the crossfader? I need to replace mine and can’t find it, even on the Numark site.
@inMusicBrandsSupport
2 жыл бұрын
Hi! Thanks for posting! Internal parts are not typically posted to our website. Contact your nearest Numark Support team and they should be able to help you with the availability and purchase of Numark parts: www.numark.com/support
@VISIONBTS
2 жыл бұрын
the dvs isnt reading in my serato, phono input is working properly tho .. help
@TBURNATV
Жыл бұрын
i do all the steps but nothing changed ....
@AprendeScratching
2 жыл бұрын
Mi estas tre, tre surprizita trovi subtekstojn en Esperanto ĉi tie. Salutojn el Hispanio
@inMusicBrandsSupport
2 жыл бұрын
Jes, la produktisto de la plimulto de la filmetoj en ĉi tiu kanalo ankaŭ estas esperantisto-la subtekstoj ĉi tie estis eksperimento pri la tradukado de anglaj subtekstoj per diversaj tekstoredaktiloj por estontaj projektoj. Dankon pro via komento kaj saluton el Usono!
@FunkyAivan
2 жыл бұрын
Is it really working? Can u show result?
@inMusicBrandsSupport
2 жыл бұрын
Hey there! It sure is ☺️ Try it out for yourself-remember that crossfaders can be finicky sometimes, so it'll take some patience to get it sounding exactly the way you want it.
@FunkyAivan
2 жыл бұрын
@@inMusicBrandsSupport i gave up and bought inno fader pro mini
@illyam689
2 жыл бұрын
@@FunkyAivan did you have problem with the original crossfader? is it hard to replace with innofader pro mini?
@FunkyAivan
2 жыл бұрын
@@illyam689 With original I can’t calibrate the cut. With the innofader pro there is no problem
@OriginallyInspired
Жыл бұрын
sorry for shouting, I understand you had to try and lock away as many things as possible in order to gear people towards lusting over your unaffordable stuff. ok no fx for vinyl old hams but the kids wont complain grand, ye thats fine. but if a dj skuts can do all that jazz without needing to unscrew everything. worlds gone a bit mad here lemme design a mixer for ya already
Пікірлер: 30