Thanks for making this video. I just got this in the post and your video shows just how easy it is to use. I am going to go put it to use right now!
@StatUpBox
6 жыл бұрын
Thanks! Nice!
@pauldouglas5883
6 жыл бұрын
LoL Now I need to figure out why I am getting a Link Error. If it is not one thing it is another!
@StatUpBox
6 жыл бұрын
try turning off vehicle and disconnecting and connecting it again, waiting about 1 minute then try again. Also verify that it has a tight fit. In some vehicles we noticed that we had to fully turn on ignition, even though the owners manual said not too.
@pauldouglas5883
6 жыл бұрын
Oh yea..I tried all that..It is looking like I may have a short in a sensor somewhere. I will have to see if after I clean the air-intake and the mass air flow sensor if it still won't link I will have to check all of the sensors. ugh.
@johncolon244
2 жыл бұрын
Also my OBD 11 OXGORD MS 3O9 WHO IS THE MANUFACTURER
@TheCreativeComposer
5 жыл бұрын
Hi, thanks for the video. so when you said turn on the ignition but not engine, are you saying just get the battery/lights on ?
@StatUpBox
5 жыл бұрын
Yes, half way. But on some of the vehicle's tested we had to turn it all the way ( engine on) for it to work.
@TheCreativeComposer
5 жыл бұрын
@@StatUpBox Hi, I tried as described and turning half way, I got it to work then I scanned the codes fine. But when I tried to erase, I get a message "ERASE FAIL!" . I noticed that the check engine light is done, so I was not bothered by ERASE FAIL message. But then within a day (about 25 miles of drive), the light came back again. I am thinking that the ERASE FAIL did not erase it completely?
@StatUpBox
5 жыл бұрын
Remember that a code can be a sign of something needing to be fix, if not fixed code will come back. Good luck.
@TheCreativeComposer
5 жыл бұрын
@@StatUpBox I understand but why should it say Erase Fail? I would understand if erase was successful but the light comes back again due to genuine problems. My feeling is that since the erase fail message was displayed, the product was unable to erase?
@cyberjoe77
6 жыл бұрын
So to use only turn ignition but not to turn on engine?
@StatUpBox
6 жыл бұрын
Yes, even though in some vehicles we had to fully turn it on for it to work.
@cyberjoe77
6 жыл бұрын
StatUpBox Thx for reply. It’s a pretty good odb. I got it for 18 bucks on Amazon.
@JoseRodriguez-qc5jr
5 жыл бұрын
cyberjoe77 Simon
@riggee4061
6 жыл бұрын
I'm trying this product but it gives error code
@StatUpBox
6 жыл бұрын
when testing this product, one of the three vehicles gave us an error msg. We disconnect the machine and connected it again but this time we fully turned on the engine and it worked. Hope this helps
@johncolon244
2 жыл бұрын
Hello I got the OBD 11 ox good sensor I bought it but did not came the manual 0x gord ms 309 Where I can get One. Thank, reply
@StatUpBox
2 жыл бұрын
you should be able to google your model number and use the word owners manual and it should populate in the search results. good luck
@johncolon244
2 жыл бұрын
@@StatUpBox thank
@dennisdangio9926
3 жыл бұрын
You don't tell us what to do when it refuses to erase a trouble code. I am sending mine back to Amazon.
@quidestveritas0
Жыл бұрын
I'm having the same problem
@chasechampion3862
5 жыл бұрын
This isn't much of a review! 😂😂 It's more like a guide of how to use it.
Пікірлер: 27