Just what I needed. Another idea to spend my time and money on for my truck.
@ashokjames3467
4 ай бұрын
Thank you very much. I did the tank and very happy with the extra gallons of diesel.
@fordguy4599
Жыл бұрын
I'm glad your still making videos, I've used all your videos as reference to fix my truck
@TheFSeries
Жыл бұрын
Glad to be of help to you!
@hammahdepartment5667
Жыл бұрын
I greatly appreciate you posting this video, helps out big time 🤙🏽
@PeterHatch-mx7zc
Жыл бұрын
Thks for the video my problem love the tank but has to be able use it for a fuel Injected motor i put a in tank pump on the extended tube but no baffling 38 gals great mines a 1965 f100 crown Victoria crossmember 5.3 4l60 with a 14 bolt diff any thank you for the video👍😊
@davidmcelroy4552
Жыл бұрын
I haven’t been able to find the sending unit you used, can you give me a part number to find it by chance?
@TylerFloydFilms
Жыл бұрын
I’m in same boat lol
@jameslaiola4976
3 ай бұрын
Thats what im lookin for Sir. Can i ask if you have any available partnumbers? I want to do the same thing
@WilliamMunny-d8s
19 күн бұрын
shouldnt there be a big sock on the end of the pickup tube? ive never seen just bare metal tube like that
@LarryReynolds591
Жыл бұрын
Great stuff and thank you for making this video! 2 questions: 1) If I remove my receiver hitch, how can I get the bolts back in when I install the tank? Looks like I wouldn't be able to get to the top to hold the bolts to tighten them. 2) If I just remove the bed can I install the tank from the top and leave my hitch on?
@TheFSeries
Жыл бұрын
1) Very carefully. I did some interesting stuff with a wrench to get it in. 2) Absolutely. To make things even better, a great time to clean and paint the frame, as well as paint/repair your leaf spring hangers.
@deepbludude4697
2 жыл бұрын
Nice, so im guessing you bypassed the entire Fuel Tank Selector Valve? Ive pulled mine apart multiple times. Im about to do this mod on my 89 F250 IDI. I struggled with that plastic fuel line ended up using a harbour frieght heat gun to get the nipple onto the line. I love this truck wish I had the money to give it some body love it deserves. Shes ate up with rust Ive got the Driver floor held up with hockey pucks and rubber door wedges and some sheet metal screwed in for now. Motor has under 90K though.
@TheFSeries
2 жыл бұрын
Correct I used 6AN fittings and Stainless Braided PTFE 3/8” fuel line for both the send/return lines. Just eliminated a lot of headaches, etc
@artemiotrujillo1979
11 ай бұрын
Thanks
@PeterHatch-mx7zc
Жыл бұрын
Off the subject with the manuel pump i put a check value where the 90 is put 90 on value then fuel line stop fuel bleeding back but with the elec pump may not just help with frist start i work for a drilling company they had 20 of them any wsy just a thought
@MarkReimer1
10 ай бұрын
Where did you get the bracket to mount the electric fuel pump? I am about to do the same modification to mine. Thank you.
@jamesmontgomery9464
Жыл бұрын
doing the same on my 88 F350 2wd. my concern is... since the tank is so much lower, should i have a skid plate?
@fordman77881
Жыл бұрын
What tank did u use part number
@yanez8626
6 ай бұрын
I think its the f26e
@nickroberts4586
Жыл бұрын
Is this from classic diesel designs? Thx
@yanez8626
6 ай бұрын
I think he sourced it out. If not mistaken its the f26e tank
@Andre-gt3ip
2 ай бұрын
Can this tank work for gas engine?
@DaFsPilot
Жыл бұрын
Where did you get the sending unit?
@BobTheBreaker9
Жыл бұрын
Did you modify the float or did it come that way?
@TheFSeries
Жыл бұрын
Made a new float rod with a piece of 3/32” brazing rod
@harleydauterman9204
Жыл бұрын
About how much all this set up run you ?
@TheFSeries
Жыл бұрын
About $450 counting the fuel lines, etc
@harleydauterman9204
Жыл бұрын
@@TheFSeries got any links for the parts
@Cherokee93
Жыл бұрын
My gauge seems to move faster under 1/4 tank is that the issue?
@Peter-V_00
Жыл бұрын
No, the black plastic piece that looks like a shower head fall apart after 5 years or so, when they do at about 1/4 tank the metal tube is unable to pick up fuel anymore and you "run out of fuel", just happened to me last night, put 5 gallons in and voila', running again without touching another thing.
@Cherokee93
Жыл бұрын
@@Peter-V_00 I just took my tank out the other weekend to patch a hole with jb weld it worked but mines a different design no shower head just a sock maybe only some of em have the faucet
@Peter-V_00
Жыл бұрын
@@Cherokee93 Sounds like a gas truck, as a rule the OBS diesels 100% use shower head type pickups.
Пікірлер: 39