⭐️ great presentation and an excellent build - the lighting is fantastic ⭐️ 👍
@marcinm2767
2 жыл бұрын
thanks!!!!
@keithshergold9257
5 жыл бұрын
Nice work! I am working on this model too. I'm just at the planking-the-deck stage. I am impressed by your use of interior lighting.
@marcinm2767
5 жыл бұрын
Thanks!
@corvusvoncorax5616
3 жыл бұрын
Hi, Marcin! I decide to buy this model HMS Terror. I would like to ask, where did you buy the ship's lanterns? Incredible work! Beautiful model and lighting. Congratulations. Thank you very much for your respond.
@marcinm2767
3 жыл бұрын
On internet model shop. modelnet.pl/akcesoria-szkutnicze/lampy/lampa-okretowa-6mm
@davehardie4991
4 жыл бұрын
Very nice build
@marcinm2767
4 жыл бұрын
Thanks
@Arthur-xk1ps
4 жыл бұрын
Hi, really good job on the boat...can you tell me how you did the lightning? 😊
@marcinm2767
4 жыл бұрын
There is two led strips inside in two transparent rubber pipes. And three lamps on masts. I made two grooves on both sides on masts and fix there two wires + and - to lamps.
@nissafors
5 жыл бұрын
Im thinking about building this ship too. One question - did The Terror have any cannons? I understand the Erebus had…?
@marcinm2767
5 жыл бұрын
When it was a bomb wessel. But when they rebuilt it as expedition ship they remove all canons and two mortars.
@hugoagogo4324
4 жыл бұрын
Great job mate , is this the music off ghost ship ?? Haha
@marcinm2767
4 жыл бұрын
I downloaded free music, mayby this is ghost ship song.
@hugoagogo4324
4 жыл бұрын
@@marcinm2767 😂
@FedeSantana
3 жыл бұрын
Hi. Congratulations on a great job. I am interested in doing the same thing. Could you give me detailed instructions? I found the lamps on the Modelnet.pl website but there are different sizes (4 mm, 5 mm, 6 mm .... 12 mm): what measures did you use on your model? Which 14v bulbs did you buy? Also could you tell me how to connect the 3mm wires with the LED strip? Just connect the - together and the + together? Also why did you put the LED strip inside a rubber tube? Can you help me please? Thank you. Federico.
@marcinm2767
3 жыл бұрын
Modelnet.pl is Polish website. I use 6mm lamps on Terror. On my Beagle on smalest mast i have one 5mm lamp like on Mayflower. Led strip have + and -., you can cut them in about 3cm parts. There are markers on strips. Leds only work when you properly conect + and - to power source. 14v bulps you must buy in your electric shop. The must fit to this lamps. You need to solder wires to led strips and to bulps. One intalation with - ,and another with +. And i made conect point on bottom of ship. Minus and plus on different sites. Rubber tubes are for simpler intalation for led strips. You don,t need to use them. Wires have 0,3mm, i use internet cable wires.
@FedeSantana
3 жыл бұрын
@@marcinm2767 thank you for answering. Will I also need resistors or can I connect the electrical cables directly to the LED strips? Are the bulbs normal or led?
@marcinm2767
3 жыл бұрын
@@FedeSantana bulbs are normal. They give yellow light. Led strips have connect pionts for+ and -, where you can cut them, there you connect wires.
@FedeSantana
3 жыл бұрын
@@marcinm2767 ok perfect! Thank u so much Marcin! 🙂
@FedeSantana
3 жыл бұрын
@@marcinm2767 could you tell me which model of light bulb did you buy? i found many small 12v led bulbs but if i look for 14v bulbs they all seem too big. Do you have a photo of the light bulb?
@pm9377
3 жыл бұрын
Cześć, właśnie zakupiłem model hms terror i bardzo podoba mi się jego oświetlenie. Pod pokładem są zamontowane listwy led'owe, natomiast mam pytanie odnośnie lamp na masztach, czy kupowałem dodatkowe lampy lub jak tam zamontowałeś ledy? Będę wdzięczny za informację lub wskazówki. Pozdrawiam
@marcinm2767
3 жыл бұрын
lampy trzeba kupić, nie ma ich w zestawie, na masztach są małe żarówki 14v. Cienkie druty pociągnięte do góry i zamalowane. Lampy zmieniłem na takie jak na Beaglu. Zakupione na Modelnet.pl
@pm9377
3 жыл бұрын
@@marcinm2767 dzięki za informację.
@368engbn
4 жыл бұрын
I think your vinyl record is warped. Nice model.
@runedyrting8476
5 жыл бұрын
Why is this ship called Terror, It hasent got a single canon on it?
@marcinm2767
5 жыл бұрын
It was rebuilt from bomb vessel. On the deck was two mortars. And couple cannons. Then they rebuilt it as expedition ship.
@rienwalrave9754
4 жыл бұрын
Hi Marcin, did you use paper for the windows or other material to let the inside light through?
@marcinm2767
4 жыл бұрын
No. Transparent plastic.
@killerkane1957
3 жыл бұрын
Nice work! Nautical tune? Nope.
@algansstephane1525
5 жыл бұрын
Hello, how buy chainplate please?
@marcinm2767
5 жыл бұрын
I made this from aluminium plates from this kit.
@algansstephane1525
5 жыл бұрын
@@marcinm2767 ok thanks, is better that occre kit.
@algansstephane1525
5 жыл бұрын
It's stack size?
@algansstephane1525
5 жыл бұрын
There are enough plates in the kit? Thank you so much.
Пікірлер: 39