For a guy who’s had his oculus for almost 2 years now and had stick drift on the second week of having my quest this is reality changing for me thank you so much for everything you do and everyone you’ve helped in the past and forever in the future
@ImJustLayZ
2 жыл бұрын
same i just get drift on the 6th day of having my quest 2 its ridiculous
@EpicJosueJedi
Жыл бұрын
@@ImJustLayZ saaame and the fact that sending it back for repairs most times doesnt even solve the issue
@CommonBZProtogen
Жыл бұрын
Like your telling me just playing for a few days = STICK DRIF while I could play on a ps4 for billions of years and no stickdrift. Meta is confusing me with more confusing at this rate
@jurilentis5899
11 ай бұрын
week 1 of having my quest 2. suddenly stick started drifting mid game, to much frustration. i tried calibratig first, but the drift is not constant and throws back quite a bit. Amazed of how quick this became an issue. i get it fixed with just wiggling it a bunch till it stops drifting, but i bet it will be just a few days before i'll need to open it up. Would love an update on how well the cleaning holds, if you're still using the oculus.
@luke-tw4xc
4 ай бұрын
IVE HAD STICK DRIFT FOR A YEAR NOW AND YOU FIXED IT!!!! THANKS!!!
@koigaming2436
Жыл бұрын
Awesome fix! PLEASE READ so some problems I ran into after performing is that after about 15 minutes of letting them both sit they "shorted" for a second, one controller buzzed continually then stopped working and the other outright stopped. though it is no longer a problem. I do recommend for people who do this to let your controllers sit out for 45 minutes to an hour before you reintroduce the battery just to stay safe. if the controllers stop working give them some time and they will most likely fix themselves as the rest of the contact solution or isopropyl alcohol will dry out.
@manp1039
Жыл бұрын
the 91% or 99% isopropyl alcohol is better and has less water in it an dries much faster. i would not recommend lower proof alcohol on electronic circuits or contacts. I have been using non conducting zero residue contact cleaner for my quest 2 controllers joy sticks. I spray it in the gap where the joystick and plast plate meet. I even do it with the battery still in place. And it has been working for me.
@idunno...2179
Жыл бұрын
Did you use the contact cleaner for electronics?
@Doggo.11
10 ай бұрын
How did you get yours to fix? to stop buzzing?
@gotchaabeech
2 ай бұрын
I have no idea why people wouldn’t take apart the controller and let it sit to dry. It’s not hard to take it apart and what really is the problem is the contacts inside of the joystick mechanism you need to make the contacts be able to reach down and touch the sensors. After a bunch of playing those get used so much they start to flex up but you need them to touch the sensors
@MaccOnYT
Жыл бұрын
Awesome video, waiting for it to dry, will come back later with results
@rentokan6495
Жыл бұрын
So how is it now?
@MaccOnYT
Жыл бұрын
@@rentokan6495 it worked flawlessly
@rentokan6495
Жыл бұрын
@@MaccOnYT that's good to hear man
@user-br5bt2bx6s
15 күн бұрын
@@MaccOnYT How long does it take to start drift again?
@Mr.Mahoganylog
2 ай бұрын
I've had stick drift for god knows how long and I tried this video it worked perfectly thank you so much
@Armis71
Жыл бұрын
This is a quick easy fix. Good video. You get to clean it and it should last you until dirt gets in there and gunk things up. If it's drifting after just a few days after cleaning, and you're doing it more often, then it's probably time to replace the joystick. The cheaper way is to order joystick replacements in Amazon, but you're going to have to take the controller apart. Plenty of good videos of that in YT. Replacing the whole thing with a new/refurbished controller is around $60-90.
@butterypancakes1888
Жыл бұрын
Something to note when taking off the face plate of the controller is to be VERY gentle and try not to bend too hard or else you might possibly bend one of the detents (like i did) thankfully I was able to bend them back into shape with some pliers. If you do bend one of them and bend them back into shape do it VERY GENTLY otherwise you might break the detent off. And no I didn't do this, it's just a suspicioun.
@samuraidoge8097
2 жыл бұрын
so the spring in the controller kinda went boing and now when i take off joystick its just in the air like strected really annoying
@beyondabovemedia
Жыл бұрын
I think maybe I got lucky because my children ran this VR headset through a wall and back BUT this actually worked for me!!! Thank you for the video.
@rippavr8279
Жыл бұрын
Awesome, glad it helped! I extended the life of my controller almost a year. I did finally cave and replace it.
@fazemoti2755
11 ай бұрын
for how much time did it work?
@beyondabovemedia
11 ай бұрын
@@fazemoti2755 it's still working
@jamesvenning8811
Жыл бұрын
This worked a treat, no longer continuously walking forward
@fazemoti2755
11 ай бұрын
for how much time did it work?
@gtube22
Ай бұрын
Thanks for the video. It worked. Used an ifixit kit and $30 for the WD-40 contact cleaner. I left the plate off for 30 minutes before reassembly.
@reddivisions9017
5 ай бұрын
I've had the quest 2 since launch and the problem I'm having is a bit more frustrating than I thought it'd be. When I opened it and cleaned around the joystick, put it back on and everything it still would drift, I would see the transparent thumb still pushing downwards and I don't know what to do. Any info on how to fix this would be a life saver, thanks.
@urbexgamma
Жыл бұрын
I always used air for cleaning and that worked a few times. This time it didnt work en drifting was really getting worse. Your solution worked for me !
@rey5597
Жыл бұрын
Wanna make sure you’re using canned air and not from an air compressor. Compressed air usually has moisture in it. Not saying you did that, just so others know.
@TheLostKiddoo
Жыл бұрын
The drift comes back after a few days to a month. So what you need to do is take the controller apart fully and actually get ahold of the potentiometer and take it apart and spray it down with contact cleaner so youl be cleaning the potentiometer down to the nitty gritty. Its what i did and my drift completely went away
@westsideowl5191
7 ай бұрын
This guy saved me 80 bucks! Thanks man you are the best
@PietSHansen
2 жыл бұрын
I had drift for many months and wanted to play the games where you move with the stick and now it's fixed and I'm so happy thank you for the video And I just blowed and used q tips
@JohnSmith-up3jz
2 жыл бұрын
Do you know what I realized it is only the left controller
@bryantdobbs6383
Жыл бұрын
For real
@CuriousChronicles82275
Жыл бұрын
Because it's the clicking that wears it's base. When you sprint in game you press the left stick.
@willlove8630
Жыл бұрын
@@CuriousChronicles82275 exactly up on the Left stick is most commonly used.
@animancer3589
11 күн бұрын
If your thumbstick makes a clicky, "springy" noise after reassembly: the spring around the thumbstick is loose but can be retightened by twisting it clockwise. I twisted mine just a little and the clicky, springy noise went away. Be careful not to bend it though.
@MasonMorris1204
Жыл бұрын
thank you so much man, Its been increasingly getting worse, but this shit eradicated my stick drift, literally no evidence of it ever being there. Shits cazy💀
@MasonMorris1204
2 ай бұрын
@Snakes_are_not_bad literally man, now anytime I get stick drift with any controller I try this first before I throw it away and get a new one, and it always works💀💀
@BigBobTheGamer
23 күн бұрын
This works lickety-split. Thanks so much for telling me this.
@wildheartsnowflake5025
Жыл бұрын
I tried the rubbing alcohol and it worked! Tysm for helping me!
@dingleberry9484
11 ай бұрын
Can you use 50/50 percent isopropyl alchol for cleaning it?
@daryladhityahenry
10 ай бұрын
I can't believe it... It's working and my controller feels new TT__TT. Before, my controller is like a broken toy... lol. Thanks a lot!!!!!!!!!
@22informed
2 жыл бұрын
Can I get a link to those grips? You said there was a video but I can't find it!
@chem6740
Жыл бұрын
Thanks brother this helps a lot; I know it's a simple video but thank you for taking the time out of your day and doing it Shalom.
@raminagrobiz9233
2 ай бұрын
doesn't work in my house. I did everything the video shows and it's even worse. I requested an exchange from Meta but if they notice that I opened the hood I don't know if they will exchange it for free. Pay attention to the warranty! Do you think Meta closes her eyes if we remove the hood like in the video? THANKS
@fastersixth
Жыл бұрын
Thank you! Your video was by far the best on KZitem to solve my issue. Sadly I didn’t have any contact cleaner so I had to cut a straw and use to blow into. Just had to make sure I didn’t blow saliva. Haha. But I solved it. Thanks !
@manp1039
Жыл бұрын
that is a good idea to use a stray.. another option to direct blowing with mout is to attach the straw to an empty dry plastic bottle top and and squeeze air from the bottle through the straw?
@kzkane2866
Жыл бұрын
Everytime I do this it just f$&ks up my controller I swear. I did it a year ago. And it messed up the spring and just made it ultimately worse. Now I did it again to see if I can possibly fix the spring. I think I did tbh it doesn’t make a noise like it used to. But now when I took it off (I took it off very carefully) now a chip came off of the face plate -_- I’d say just spray the contact cleaner down the hole that’s what I was doing before I stupidly came back to this video. It works fine. I just spray a little like 2 or 3 small bursts and wait for like 15mins.o and take out the battery of course and I kinda slowly rotate my controller in different directions while I mess with the joy stick for like 30 secs. Then is fine for at least 2-3 days. But I mean it’s not a big hassle I’d say just if I know I’m playing or about to play. I do it so I don’t have to wait
@Tonal123
2 ай бұрын
for some reason there is a spring sound when i move the controller now?
@calrgjdjkjh7938
Жыл бұрын
BRO thanks you fixed it what a Legend.
@maluku133
2 жыл бұрын
Can you make a tutorial on alcohol to?
@andrewshyshko5849
Жыл бұрын
This worked for me, fixed my controller. Try it exactly as shown with electronic contact cleaner.
@beamedyourgrandma
4 ай бұрын
did everything you said man. and my controller completely broke. 😢
@Theblue_bros
Ай бұрын
Fr?
@aGoosenamedJordan
7 күн бұрын
Did you make sure to take the battery out?
@D3fenderfox
Жыл бұрын
Hope sylicone spray works, if not the controllers are getting sent back, mine hastnt sessesarily drifted but the inputs flicker back nack and forth so hope it still works
@mechreports1
Жыл бұрын
just tried this, i have only had my quest 2 for about 3 months, but since i bought a pc i have been using it alot more and noticed that i cant even move forward sometimes in skyrim vr its got that bad already. I will comment again if it works but god its so annoying, if this doesn't work i will buy a new joystick module.
@Max8559br
Жыл бұрын
e?
@nigroman8540
Жыл бұрын
did it work?
@gsklewel
Жыл бұрын
@@nigroman8540 this is my mobile account, but yes it did work... for about 2 weeks. in the end i replaced the joystick module and have had no issues since. Its a big pain to teardown the controller though.
@manp1039
Жыл бұрын
@@gsklewel do you have a link for the joystick module you replaced it with? was it from amazon? or?
@gsklewel
Жыл бұрын
@@manp1039 It was just an Ebay listing, they are really cheap to be fair, just put in quest 2 joystick replacement and it should come right up. Just beware its not the easiest of jobs and i recomend watching a video or two on it first. Without a video i would have likely broken mine. But its a worthwhile fix as i havent had any issues since
@fancyky2457
Жыл бұрын
Very helpful and tells everyone exactly what to do and what u need clearly thank you so much I subbed now because u are very helpful
@joaquinparedes899
Ай бұрын
i really need to try this, ive been doing vrc boxing for a while and now my turning drift is ABYSMAL, if this really does end up working well....ill have to be forced to sub edit: whats promised is due...it worked like a charm
@fluffypancake8854
6 ай бұрын
Think there might be smt wrong w mine, it’s stuck looking left and only moves when I click down? Someone help me please
@MarkReed-smokindeist
Жыл бұрын
The thin blade of a Swiss Army knife works well for this. I also recommend that you give it an hour or two to ensure that the contact cleaner is totally evaporated.
@Lanuzos
Жыл бұрын
The swiss knife usually features a bottle and can opener as well. One of those has a thin edge that I have used to open up the controller, it's safer than with the blade since you won't cut yourself if you slip off.
@MarkReed-smokindeist
Жыл бұрын
@@Lanuzos Good point. I just felt that the blade helped with that adhesive strip but yeah, the can opener would be a bit safer. The bottle opener is a bit wider though.
@003wrldd
Жыл бұрын
I think most of my adhesive wore off because everytime I pop the black faceplate back on it doesn’t go down all the way 🤷🏾♂️
@Random_Slice
Жыл бұрын
I did this and my controller is now broken. Any idea why? Where can i get a cheap replacement?
@anonymousentity7998
Жыл бұрын
This Really Worked Like Magic
@VintageFenrir
Жыл бұрын
Well I guess I don't have drift anymore, considering my controller won't even turn on after this
@traveledsoap5446
Жыл бұрын
I had stick drift for over a year and used this video and it worked for about 10 minutes and then started having problems again, is there anything else I can do?
@marshmallowbae4930
4 ай бұрын
Ladies that don’t have an X-Acto knife i literally used a small silver hair clip 😂😂it works just fine use both ends the tiny parts along the edges and yo lift flip it around and use the bigger part 😂😂. You’re gonna see the adhesive as you’re doing this you’re not stripping any color ☺️.
@Tiwer99
3 ай бұрын
Thank you ! It worked perfectly.
@asdsajshe
2 ай бұрын
Did everything on this video, its still drifting very bad. I DONT HAVE MONEY FOR A NEW PAIR OF CONTROLLERS
@TheHumanColony
Жыл бұрын
Awesome Tutorial! Thank you! Thumbs Up
@x_xangel_kms7263
Жыл бұрын
I don't have stick drift anymore but it keeps saying that the controller keeps holding it keeps staying on that blue and won't select anything can anyone help
@Ares1027-2
Жыл бұрын
My controllers work but I can't go forward, did I do something wrong maybe use to much? I tried my hardest not to ruin any of the electronics. Nvm my controllers work, thank you so much.
@Nightblade-452
Жыл бұрын
I think i went a bit too deep i saw black glue or something is that normal
@gotchaabeech
2 ай бұрын
You guys should just take the whole controller apart and re-set the contacts inside of the joystick mechanism.
@ryanmcnerney8644
Жыл бұрын
Thank you man this helped a lot
@Metalgeargamecat
2 ай бұрын
Thanks dude it worked you the man 👍
@alexmz8548
Жыл бұрын
Do you drop achohol in the whole with the plate off ? Will it work? Will it damage? Please help
@theprophet2667
Жыл бұрын
Maybe? Isopropyl alcohol is used for cleaning the boards of electronics but even then I only used it with a a cap full and that’s it
@rippavr8279
Жыл бұрын
It only takes a few drops of IPA. I do however prefer to use the electrical contact cleaner as it evaporates quicker.
@DracoEvadead
Жыл бұрын
@@theprophet2667 do you pour rubbing achohol on the cap and then pour it inside?
@manp1039
Жыл бұрын
@@rippavr8279 i saw you with 70% IPA. I have heard you should use 91% or higher IPA for electronics.. especially electronics where it can seep into crevaces and pool up inside components. The reason they suggest using the higher proof IPA is that it has less water in it and it will evaporate much more throroughly and quicker. and reduces risk of it leaving moisture inside components.. which can also cause oxidation of the contacts.
@SHEIKVEKTOR
6 ай бұрын
thanks for the fix. It helped alot❤❤❤❤
@johnnysnags9101
2 жыл бұрын
worked, and mine was awful. thanks so much
@fazemoti2755
11 ай бұрын
for how much time did it work?
@Blueberryvr089
27 күн бұрын
Ty bro I love you Ty so much
@ninjaluis8445
Жыл бұрын
Tysm bro it worked better than ever 😭😭😭
@fazemoti2755
11 ай бұрын
for how much time did it work?
@tedtanner1154
Жыл бұрын
It broke my controller and now it wont turn on do you know how to fix it
@rippavr8279
Жыл бұрын
Have you tried putting the battery back in after letting the controller dry out? Depending how much you sprayed in it could take a bit longer to evaporate.
@tedtanner1154
Жыл бұрын
@@rippavr8279 It took a night but now it’s all working amazingly well
@TVdosPatriotas
Жыл бұрын
Thanks for the video, but there was literally no dust inside and it's still drifting. Planned obsolescence, I guess.
@DataBrix
Жыл бұрын
while you are right about some stuff being planned to cease function, in this case if you could see the dust particles it wouldn't have gotten inside the sensitive parts in the first place.
@shminishmeat
11 ай бұрын
Codeys lab of vr tech tips
@FiddleVR
2 жыл бұрын
No this does not work ive done this multiple times and no matter what is gets worse and worse
@DiorlandRippRBLX
Жыл бұрын
make you sure you have WD40 CONTACT CLEANER, and not normal WD40. Normal WD40 will make your stick drift worse.
@FiddleVR
Жыл бұрын
@@DiorlandRippRBLX I use electrical leaner and it will temporarly fix it.
@breeseburger
Жыл бұрын
Soon this will help, my right joystick for some reason cracked, without it being whacked or pressed hard, the plastic's just cheap.
@manp1039
Жыл бұрын
have you considered DIY replacing the joystick? I saw videos about kits sold on amazon for the quest 2 with the joystick replacments and tools needed to do the replacment.. Someone even said that some of these replacment joysticks are of higher quality than the one that comes with the quest 2 controllers.
@kk-xg3xl
Жыл бұрын
it works with compress air.
@kauezinhscar
Жыл бұрын
Thank you very much sr.
@fazemoti2755
11 ай бұрын
for how much time did it work?
@caine.4l
2 жыл бұрын
i can’t get the thumb stick off
@sleepless9003
2 жыл бұрын
Bruh
@SamArk3101
2 жыл бұрын
It didn’t work for me
@dominicconnell2831
2 жыл бұрын
i want to thank u i thuoght that i was going to have to buy a new controller
@manofsteel6194
9 ай бұрын
can you use am40?
@omoran2889
Жыл бұрын
it didnt work. Any other ideas?
@mychannelgeneral
11 ай бұрын
To anyone who's gonna try this, it works 100% but do not pull the joystick off the string. Personally, I don't know how to reattach it and now my controller makes this slight squeaking-string sound
@dylanmccarty3327
10 ай бұрын
so
@Mariovr134
Жыл бұрын
does sanitizer work
@yoku7301
Жыл бұрын
if i remove the black cover on my controller, will this void my warranty?
@kerfuffle764
Жыл бұрын
nah I did it and sent it in just fine dont worry!
@yoku7301
Жыл бұрын
@@kerfuffle764 appreciate
@kerfuffle764
Жыл бұрын
@@yoku7301 no problem
@otherapro
11 ай бұрын
thx bro, really ❤❤❤
@twoshawn
2 жыл бұрын
ty
@the0eldest
11 ай бұрын
for electronics you should use 90%+ alcohol.
@kulits877
Жыл бұрын
I literally took off the adhesive with my fingers.
@malonethecock
Жыл бұрын
This works! tysm
@fazemoti2755
11 ай бұрын
for how much time did it work?
@malonethecock
11 ай бұрын
@@fazemoti2755 like a week. ended up using WD-40 and it worked for like 5 months until i got a little bit more
@lilacded
Жыл бұрын
You are a fucking life saver man thank you
@fazemoti2755
11 ай бұрын
for how much time did it work?
@lilacded
11 ай бұрын
@@fazemoti2755 on my first quest about 6 months for my current quest (of which I've had for 8 months) it's still working fine after doing this ifit continues to happen just re-apply the wd40
@Pla_nic
Жыл бұрын
It works for me, thanks…
@fazemoti2755
11 ай бұрын
for how much time did it work?
@Pla_nic
11 ай бұрын
@@fazemoti2755 5 months and still no drifting. But carefullly don’t put too much WD, i did and my A Button stop working for a whlle…
@fazemoti2755
11 ай бұрын
@@Pla_nicit went back after how long?
@fazemoti2755
11 ай бұрын
@@Pla_nic my controller died fuck my life i guess no vr anymore
@fazemoti2755
11 ай бұрын
@@Pla_nic i managed to make him turn on stick barely works at all but aleast controller lives
@jbr600
2 жыл бұрын
WORKS GREAT!
@fazemoti2755
11 ай бұрын
for how much time did it work?
@Billy_the-cat
Жыл бұрын
The plate doesnt go back, need some help
@notreallyroyal
Жыл бұрын
Did u push the plate too hard?
@mikem2949
Жыл бұрын
I should have known better but this is not a good solution. Spraying ANY kind of liquid down into a small hole that contains electrical circuitry is a bad idea. He says take the battery out but that's largely irrelevant if you're getting liquid into an area that's extremely difficult to dry. "Quick dry" means nothing if you get liquid into small enclosed areas with no air exposure. In my case I even shot compressed air into the hole and gave it a bit to dry out but it still must not have been enough because when I installed the battery again, the controller continued to use the vibrate feature as if it was malfunctioning. Now it doesn't work at all. What probably happened is not all of the alcohol dried from where it got trapped before it was introduced to power again and it damaged the circuitry when I tried to use the controller again. Either that or the alcohol was corrosive enough to destroy something on the circuit board. Either way, anybody that got this to work was probably lucky that liquid didn't get somewhere it shouldn't have. In my case all it took was three drops to ruin the controller I fear. I currently have the controller with the face plate off sitting in front of a fan and will leave it there overnight to see if that helps but I have my doubts at this point.
@rippavr8279
Жыл бұрын
Sorry you had bad results, did you get it working after letting it dry out? IPA certainly has a longer duration to evaporate and it depends on the percentage of IPA you used. In every case (very few) were someone experienced what you had, their controllers continued to work once it dried out. Hope yours continues to work!
@mikem2949
Жыл бұрын
@@rippavr8279 It started working again after a couple days thankfully but I'd still say proceed with caution when trying this. In my case it also didn't do much to fix the problem. It made a small difference for a few hours then went back to the same amount of drifting. Ultimately I had to by a replacement joystick which was cheap, it just took a bit to install into the controller because I had to disassemble far more than was necessary for the cleaning. However looking deep into the controller it surprises me that alcohol or another suitable cleaner would do anything to help by just spraying it down in there from the top because the liquid really has to fall into the right spot but then wiggling the joystick from there would essentially just push the dirt around after it was loosened up by the cleaner. Hopefully with the cleaner or alcohol it would move the dirt off of the sensor long enough for it to help but given that the loosened dirt is never wiped out from inside the controller using this method, it could always find its way back. I'd say this is probably a last resort solution if you have absolutely no tech skills or money to buy a 25 dollar replacement joystick. For me it was easy and straight forward, just a bit time consuming.
@manp1039
Жыл бұрын
which percentage Isopropyl alcohol? I would recommend using at least 91% and even better to use 99% proof.. because the higher the percentage.. the less percentage of water it has in it.. Another option is to use the non conducting zero residue contact cleaner.. this stuff than also help remove any liquid inside a component. I use non conducting non flamable zero residue on contacts with live electricity for switches all the time. it has been very helpfull to me to clean contacts and by using the non conducting form.. there is less risk or any shorting happenning. also being that it is non flamable is also important when dealing with contacts that still have electricity or risk of sparking around them
@NotSharkCheeze
Жыл бұрын
not me dousing my conroller rn with achole
@maxxvolt961
Жыл бұрын
thxxxx
@blakevr14327
3 ай бұрын
👍
@abearinvr
2 жыл бұрын
i pressed it down it's not connecting
@Ph4ntomlol
2 жыл бұрын
Twist the stick a little bit and it works
@TheRJOmega
Жыл бұрын
the drift got worse. thanks allot
@jakedeee_
Жыл бұрын
I forgot to take my battery out😂
@cameront9219
Жыл бұрын
It broke my controller
@botboyig
10 ай бұрын
How
@dashtails7509
2 жыл бұрын
Is it okay if I broke one of the pegs on the black circle??
@able3957
2 жыл бұрын
Yes, it should be okay
@Just_Another_YouTube_channel_
Жыл бұрын
Do u broke my controller 🤡 now I can’t use my shit
@kerfuffle764
Жыл бұрын
This doesn't break it idk what you did, did you have the right wd-40?
@Just_Another_YouTube_channel_
Жыл бұрын
@@kerfuffle764 yes 😭 but u good I still got hand tracking
@fazemoti2755
11 ай бұрын
Did you use the the electric specialist wd40? Or the red and blue one
@JPDD2
Жыл бұрын
Regular WD-40 works too. I used it on accident thinking it was my compressed air. I was so mad at myself but it actually worked better than just the air!
@VintageFenrir
Жыл бұрын
I would avoid that. The contact cleaner is made to dry and dissipate. The regular WD-40 does not, and will ultimately attract dirt. By design it leaves an oily film. If it's conductive it could cause even worse problems potentially.
@manp1039
Жыл бұрын
@@VintageFenrir you said exactly what i was going to say
@ademarbaptista4420
Жыл бұрын
DO NOT DO THIS TO YOUR CONTROLLER, this shit gets much more worse and I lost the touch, I strongly regret having done this "easy fix", my controller is rubbish now.
@silvercat18
Жыл бұрын
Well, to be fair, if you had to do this - your controller is already unusable. Your controller was already junk and you lost nothing by giving this a try.
Пікірлер: 170