Pro tips : Don't really need to do the maths in Ableton Live , just select/highlight the length of the note , and Duration of the highlighted length will show at the bottom of the screen . You are welcome Have a nice day.
@uppercuts8984
2 жыл бұрын
pin this comment lol
@camrontaborda5672
2 жыл бұрын
I was wondering if hed show it but apparently not. Glad someone else knows
@keithforrester82
2 жыл бұрын
Very good. Never thought of using arpeggiator to do that! Always tried LFO and found it somewhat awkward. Really clearly explained too👏🏼
@WBradleyRobbins
8 ай бұрын
Fun trick, if you bounce your arp pattern to midi, and use that midi to drive the gating, you can adjust the pattern as needed. IE you could sweep up or down in tempo with the gating, then have the last segment match drum hits or other rhythmic elements in the track by manually adjusting the midi.
@7oel7777777
2 жыл бұрын
Just highlight a selection to the grid in arrangement view and bottom left of the screen Live will provide a time selection: length (duration: 0.00.522). Way faster than doing math.
@cantaro170
2 жыл бұрын
YES
@jukkalariola1292
2 жыл бұрын
Your math is off by a factor of 10. 1s = 1000 ms, not 100. So 0.5217 * 100 = 50.217. The answer was correct though. I find it a lot easier to just calculate 60 000 / bpm = 1/4 note in milliseconds.
@epicwhawha
2 жыл бұрын
🤓
@mpiper4781
2 жыл бұрын
521.7 ms
@iszlu
2 жыл бұрын
haha glad someone mentioned that I was gonna say it too
@fathersonalcohol6490
2 жыл бұрын
His math is fine he just said 100 instead 1000
@jukkalariola1292
2 жыл бұрын
@@fathersonalcohol6490 Check out the text editor at 5:28, it's wrong there too.
@robertlindberg3132
2 жыл бұрын
I'VE BEEN LOOKING FOR THIS FOR SO LONG!!!!!! Thanks man 🙏
@purplekurtains14
8 ай бұрын
Wonderful! I usually use the haas effect on just one synth.. I like how you hard panned two synths and put a delay on one of them. Definitely going to try this.
@shittyglam
2 жыл бұрын
5:00 eternamente agradecido, nunca supe formular esa solución hasta este momento
@1927bajjab
2 жыл бұрын
Really love this instructor!
@d00lph1n
2 жыл бұрын
Nice video. While listening to the new Odesza tune I've wondered how this was done. KZitem must be reading my mind 😅
@damo5791
2 жыл бұрын
Excellent tutorial! Thank you.
@benjambenjambenjam
2 жыл бұрын
Excellent tutorial ! Too bad we don't have the whole instrument you created but in a
@Dimitry_Ozerov
2 жыл бұрын
Dude, thnx a lot for this tutorial! I work in Logic, but the principle is the same. I understand that there are several ways to get such a sound, but your way helps to understand the general algorithms and apply them anywhere
@EtienneUnfolds
2 жыл бұрын
This is cool. I'm unable to replicate the movement of the envelopes and overall sound design, looking at your video the attack and other things move at 5:51
@eddyt6127
Жыл бұрын
Top !!
@NorthWestLacrosse
2 жыл бұрын
Very valuable info! Thank you
@claudiongleur
2 жыл бұрын
Really cool Thx
@grady9707
2 жыл бұрын
Great stuff - valuable chap
@Carefullyprepared
2 жыл бұрын
So sick!
@AKGreen
2 жыл бұрын
Ludwig Goransson perfected this on the Tenet score.
@dwithun7728
2 жыл бұрын
Great Content
@ianhodge2681
2 жыл бұрын
This if fires AF, thanks homies !!
@abhishekc1458
2 жыл бұрын
This is amazing
@terlonious2929
2 жыл бұрын
solid tutorial (Y)
@CedarMist
2 жыл бұрын
Great tutorial!
@er404music
2 жыл бұрын
A tutorial for the tamper and sound would be really nice!
@DyzziMusic
2 жыл бұрын
Gonna try this in fl, wish me luck lol
@alexandermoran5275
2 жыл бұрын
Is it possible for you to do a tutorial on the bass guitar from the 2nd drop of that Odesza song? , it’s also a sound very popular in feed me songs and nu disco
@natematthews915
2 жыл бұрын
Very good tutorial on creating this! I had wanted to know how to do this!! I would have liked to see your other settings to be able to recreate this synth too!
@steam2277
Жыл бұрын
Can you share the ableton file... I am having trouble! Did you ever figure it out?
@natematthews915
Жыл бұрын
@@steam2277 I did end up creating something similar in the end yes.
@exshenanigan2333
2 жыл бұрын
for those who are lazy for the math part, since the automation loops, it syncs up every 2 bars so just try going by ear, it might just work
@ritwikranjan9697
2 жыл бұрын
Lol exactly
@steam2277
Жыл бұрын
Can you share the ableton file... I am having trouble!
@morpheus3693
Жыл бұрын
Yoo first of all thanks a lot for the lesson that was very instructiv ! i see you've done an automation on one the wave table's filter and it seems to follow the arpegiator automation. how can i do that ?! sorry for my english, peace every one.
@WBradleyRobbins
8 ай бұрын
I know this vid is a year old, but you wanted more tracks with a similar effect: Argy and Goom Gum - Pantheon at about 1:00,
@Foss98
Жыл бұрын
How did you get the frequency of the wavetable to oscillate too?
@Dexton0742
2 жыл бұрын
Wow. That's a great tutorial. Definitely gonna use this process...
@Trazynn
2 жыл бұрын
Flume does this a ton as well.
@PointBlankMusicSchool
2 жыл бұрын
You're right!
@treyhudson73
2 жыл бұрын
You should have it in the ti...🤔
@colinmacleod2751
2 жыл бұрын
This is a great video! Has anyone seen a good similar video for logic? The ARP in logic seems different
@TheHiddenConcept
2 жыл бұрын
I’ve been looking. I’ve been trying to switch to Logic for a bit. But its very hard for me to switch because I don’t know how to do little things like this. I know there are other ways to do it but I guess it would depend on the synth being used.
@GogOtHeCaT15
2 жыл бұрын
I'm confused about the filter envelope automation, how did you automate it ?
@marianobarella3191
2 жыл бұрын
You can map the parameters inside the instrument's matrix
@maxmason75
2 жыл бұрын
Yeah this wasn't explained!
@johnmoumouris7342
2 жыл бұрын
any way to do the same on Logic Pro?
@Rgdonaire_07
2 жыл бұрын
Or you can get flex groove max device.
@NoRace
2 жыл бұрын
Cool ...now can you do it in Propellerhead Resaon ?
@skornia8101
2 жыл бұрын
Overthinking it a bit on the mathematic side lol but still good video
@kevindowtyjr4503
2 жыл бұрын
Does the mono integrity of the sound degrade when you hard pan like that? Would you hear the sound in mono?
@lewistaylor3767
2 жыл бұрын
do you know how to use this method but with HZ instead of milliseconds? converting the two doesn't work right. and a lot of abletons features are in HZ not MS.
@notelba1990
2 жыл бұрын
I can't find how to show Macro Mappings - anyone know please? Thanks (great vid)
@notelba1990
2 жыл бұрын
worked it out - the MAP button (Green) must be pressed on the device for it to show!
@ethansan6257
2 жыл бұрын
im tryin to find out how he duplicated the synth at 1:45 can anyone help me with what tool that is?
@7oel7777777
2 жыл бұрын
Make sure the synth is grouped (command g) and select the instrument and duplicate (command d)
Пікірлер: 67