Could you leave some lync to the bleeding kit needed for the process? Or maybe the specified kit... It would be very helpful.
@michelmastriani
Жыл бұрын
Thank you so much! I'm from Brazil and received the groupset I bought. Soon I’ll install it and the video helped a lot.
@ltwoo.offcial
Жыл бұрын
@hokyunryu4780
3 күн бұрын
I got ltwoo rx 12 speed lever I want adjustment brake stroke of lever however screw in front of lever plate only rotate one cycle and it was squre screw head inside what should i do if i want adjust more?
@seanbarman
Жыл бұрын
From A marketing perspective, you could provide those tools with the group-set and still out price the competition. It would be a great introductory limited offer to gain traction against mainstream brands. Your products are excellent
@grmar1494
Жыл бұрын
The tools are not from L-Twoo these are in the Jagwire Elite bleeding kit (around 90€ the kit). But you can found good ones for non pro users at 20€.
@ltwoo.offcial
Жыл бұрын
Thank you very much for your support。
@MyVideoHome2012
3 ай бұрын
Actually very good suggestion from someone working with this for the first time.
@gerdkerman9849
Жыл бұрын
This is the begining of budget road hydraulic brifters
@user-xu3oq2tv5p
8 ай бұрын
I hope to work in such a company.
@nishikata-kun7431
11 ай бұрын
Is ltwoo gr7 also has hydraulic?
@dilvastak7351
Жыл бұрын
Can you tell me where I can buy a separate brake lever if I break it when I fall?
@qwertyazerty2137
5 ай бұрын
The bleed port uses a 2 mm hex wrench, not a 2.5 mm, but all of this does not matter. In my GR9 left lever the bleed port screw is tightened so tight that it won't budge and I already stripped its head. Now I am left with a useless product...
@hakunamatata7090
3 ай бұрын
Решили проблему? У меня тоже так(
@sebastianm2381
7 ай бұрын
The shifter has two screws: the bleed port and a screw labelled "air". What does it do? There's no explanation anywhere to be found.
@pierrex3226
4 ай бұрын
idk what the air one does, but for what's shown in the video, you use the port labelled "oil".
@joluts3163
4 ай бұрын
check their other bleed video from 6 months ago. It is explained there.
@AlexDyerNoCalRealEstate
Жыл бұрын
How does the hydronic hose connect to the bears leaver? I am installing the groupset on a Trek Domane and cannot figure it out.
@richg7163
6 ай бұрын
A barb is inserted into the brake cable. A threaded compression nut is passed over the end of the brake cable, then put the brass olive over the end of the cable. Now push the brake cable into the shifter, and push the olive and nut into the shifter thread. Now by tightening the compression nut it squeezes the olive into an oil tight seal.
@thejuampi
10 ай бұрын
is it mineral oil?
@pierrex3226
4 ай бұрын
yes, shimano type oil.
@BioStuff415
11 ай бұрын
nice bleed kit. Where can I purchase it?
@ltwoo.offcial
11 ай бұрын
佳威JAGWIRE
@davidgarza2267
Жыл бұрын
Will there be an 11 speed gravel groupset?
@ltwoo.offcial
11 ай бұрын
yes
@svanimpe
Жыл бұрын
Is this compatible with Shimano tools (spacer/funnel) and oil?
@ltwoo.offcial
Жыл бұрын
yes
@MyVideoHome2012
3 ай бұрын
@@ltwoo.offcialI should not have to go to KZitem to find this information. As someone suggested, provide a simple bleed kit with your kit. A few plastic components should not cost $10/- (your price on aliexpress) !
@cliffordrichardc
Жыл бұрын
what different about A series and t series for 10 speed
Пікірлер: 30