2010 camry here. 300k miles. I'm told oil can go to 5-6k but I usually change after 3k. K&N oil filter. I rarely get on it enough to hit the passing gear. 5mph over spead limit. Never punched it off the line. Never had to add oil between changes. I'm old school Chevy. But the camry is a beast economical car. 300k and the only thing I've changed is tires, pads, plugs and oil.
@beardedgarage
Жыл бұрын
They last forever if you don’t live in upstate ny. The only problem I have is the salt eats them up. Damn reliable car though
@Charmander606
Ай бұрын
Thanks a lot man! Really helpful video!
@scottdavies8925
2 ай бұрын
Great video
@beardedgarage
2 ай бұрын
@@scottdavies8925 I’m glad you liked it!
@njsongwriter
2 жыл бұрын
The housing is not plastic... The oil filter housing cap (usually referred to as the oil filter cap) IS plastic the other part of the housing is still attached to the engine and it is metal (the base of the housing. The torque specs are... Oil filter cap = 18 ft.lbs. Oil filter cap drainbolt = 9 or 10 ft.lbs. If you simply install both parts using the ⅜ inch ratchet & extension in the drainbolt that's what causes the drainbolt and oil filter cap to come off together. The oil filter cap should be twice as tight as the oil filter cap drainbolt. To get an accurate reading on the dip-stick it should be checked at operating temperature which can be done next time the car is driven. It should not be overfilled.
@RexH00ligan
Жыл бұрын
Any engine can take another 0.3qts, you forgot to criticize the fact that he didn’t put a little oil on the new O-rings before installing them.
@jerrygoldstein3028
Жыл бұрын
Why remove the oil cap until your ready to fill it Anything at all falls down in there you’re fucked Never leave shit or a spark plug uncovered unless your putting it directly back on Shit does and can happen
@beardedgarage
Жыл бұрын
i hear ya, it's just a habit. I normally plug up anything I open with at least a paper towel. I "think" opening the oil cap lets the oil flow easier.
@brg88tx
2 жыл бұрын
Man, those salty roads up north did a number on your undercarriage. I just bought a 2010 Camry in Texas and i didn't have any rust underneath.
@beardedgarage
2 жыл бұрын
NY does a wonder on cars. They don't last long before they're all rusted out. Not only do our taxes suck, but we have to replace cars 3X more often than the southern states.
@DuckMcDuckinson
Жыл бұрын
@@beardedgarage hey man get some AMSOIL HD Metal Protector. It’ll prevent it from rusting any more longer.
@beardedgarage
Жыл бұрын
@@DuckMcDuckinson I’ll give it a shot, but not much helps in NYS.
@DuckMcDuckinson
Жыл бұрын
@@beardedgarage nah man it’s the greatest product you’ll ever see. It’ll last years through the toughest snowiest salt roads you could imagine. Only needs to be sprayed on once too.
@darwinsmith2286
2 жыл бұрын
So glad I don’t live in NY. Look at all that rust! Cool video
@beardedgarage
2 жыл бұрын
Yep…. Rusted cars, lots of snow and the worst run government in the 50 states!
@paulmassey1089
Жыл бұрын
@@beardedgarage Um...California...the NY.
@beardedgarage
Жыл бұрын
@@paulmassey1089 If you're talking about Government, NY gives Cali a pretty good run for the money.
@bobbybobby6435
11 ай бұрын
that garage is the real star of the show, great video.
@beardedgarage
11 ай бұрын
Thanks. Almost 15 years of saving, but I still have to finish it!
@PenguinTac0s
3 ай бұрын
Should we clean the remaining oil that’s left inside the oil filter housing or is it ok to just dump the new filter on without wiping it down?
@beardedgarage
3 ай бұрын
I tend to wipe everything down before I put it all back together. I like to make sure there’s no grit or dirt in and around the filter & housing
@PenguinTac0s
3 ай бұрын
@@beardedgarage thank you
@frankmontez6853
11 ай бұрын
I tried taking off filter housing the cartridge type but whoever did it last time over tightened the hell out of it. I may have stripped the flutes . I certainly stripped the extension hole in my cap style wrench . It has 172 K miles . 11 Camry LE 2.5 L I’m beat . I may have to remove the oil pan getting more space then using some other type of wrench . Maybe a chain wrench . Any ideas?
@beardedgarage
11 ай бұрын
I have 3-4 different wrenches, for increased levels of PITA-ness when doing an oil change. The rubber strap ones which I rarely use anymore, the metal cap style ones, an old school metal filter wrench with serrated teeth and when all else fails, a hammer and a screw driver for banging through the filter and turning the screwdriver like a handle. The problem in the Camry is that it’s the filter housing on the outside and it’s plastic, and I’m not sure a screwdriver would go through it or just crack it….but it’s gotta come out, and if you destroy it, it’s only $25 or so.
@frankmontez6853
11 ай бұрын
@@beardedgarage yes I may have to destroy it . And where do I buy one for $25 ? Toyota dealership or somewhere online like eBay or Amazon? I’ve found what looks like an adapter ( which looks like the cartridge housing) at OReillys. But it’s by Dorman and metal . It says for Toyota vehicles.. it also has like two metal screens cylinders in this kit
@beardedgarage
11 ай бұрын
@@frankmontez6853 - I just looked quick on Amazon - www.amazon.com/Genuine-Toyota-15620-31060-Filter-Assembly/dp/B008BHP68A/ref=asc_df_B008BHP68A/?tag=hyprod-20&linkCode=df0&hvadid=312712394155&hvpos=&hvnetw=g&hvrand=7166877269778784385&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9005258&hvtargid=pla-504004899047&psc=1
@Outspokentiger007
3 ай бұрын
Great Video! Subscribed !
@beardedgarage
3 ай бұрын
Much appreciated!
@moeenkarim6223
Жыл бұрын
How much does a liter of oil take? with filter change. 2011 6V le
@CDJDULAY2881
Жыл бұрын
The hole to pour the oil in is flat. Not round. The funnel end doesn’t need to go into the flat hole? It’s ok if it goes around it?
@AndresGomez-b9g
Жыл бұрын
Where did you get you lift?
@beardedgarage
Жыл бұрын
MaxJax.com, it’s pretty fantastic
@sharayprevost7122
10 ай бұрын
Thanks for this ❤
@joelandraderendon4025
7 ай бұрын
muchas gracias
@beardedgarage
7 ай бұрын
De nada
@rudyseloterio
Жыл бұрын
Thank you sir ❤️
@youngkenobro
Жыл бұрын
You forgot to replace the smaller o ring inside the filter cap.
Пікірлер: 41